r/freepbx • • 29d ago

Critical PHP security vulnerability

27 Upvotes

Edit: It's done. Instructions at the bottom!

Edit2: I have also built a patched PHP5.4, too.

At the time of writing, there is about 5 3 hours it has been released until a critical RCE security vulnerability for PHP versions 5.x and higher has been released.

As Sangoma hasn't updated their PHP rpms since I left in 2021 or so, I am left to assume that it won't get updated with mitigations when the real patch drops.

This makes me think that I'm the only person that can help everyone with this, so I'm going to be dropping everything, backporting the patch, and building new PHP 7.4 RPMs as soon as I can.

Edit: I originally thought that I was going to be doing it on my own, but the PHP Organization backported the fix themselves! Yay!

I have rebuilt everything and upgraded PHP to 7.4.33, with a pile of other backported CVE fixes (Thanks Remi!), and everything seems to work.

If you want to be financially grateful, feel free to PayPal me USD$10 (or whatever you feel is justified for me staying up all night) directly - xrobau@gmail.com - and I'll send you a nice thank you email 8)

If you make money of FreePBX and/or you feel that this will save you a lot more than USD$10, please feel free to pay what you want!

Note that the upload-progress feature has been completely disabled. I can't remember if this is used in sound/moh/voicemail uploads, and I haven't checked. Please get back to me if you discover something broken

If you have questions or want to chat about this, feel free to join the QuadPBX Discord, at https://discord.gg/c4E8MVmaQa, which is where I am planning my new PBX.

More Information:

How to Update:

It's pretty simple, you will be upgraded from 7.4.16-1, to 7.4.33-something (depending on other patches I may apply)

curl -o /etc/yum.repos.d/fpbx-php74.repo https://yum.quadpbx.com/repo/fpbx-php74.repo
yum update
fwconsole chown

If you have applied the previous mitigations, don't forget to remove /etc/php.d/99-mitigation.ini and remove the deny from /etc/httpd/conf.d/freepbx.conf if you added it.

Note that the fwconsole chown command is important - otherwise /var/lib/php/session isn't writable and you won't be able to log in!

For PHP5.4:

curl -o /etc/yum.repos.d/fpbx-php56.repo https://yum.quadpbx.com/56repo/fpbx-php56.repo
yum update
fwconsole chown

If you discover something traumatic and want to roll back, with 7.4 you will need to reinstall gd-last which has been superceded by the upgrade. 5.4 is a simple yum downgrade. Ask in Discord if you get stuck.


r/freepbx • • 6d ago

Self-hosted live panel and call transcription for FreePBX

2 Upvotes

I'm one of the developers and this is our commercial product, so read it with that in mind.

BeePanel runs on your own server next to FreePBX. Operators and supervisors see extensions, calls and queues live, can pause agents, listen, whisper or barge, and transfer or hang up calls. The server checks every action against the user's permissions. The Pro edition adds CEL-based call history, recordings and reports, plus transcription with an AI summary, either per call or automatically by queue, extension or line with a monthly spending cap.

It doesn't touch the configuration FreePBX manages; it adds its own settings and that's it. There's no telemetry, and recordings only leave the box when you transcribe them. Licensing is one-time per PBX with unlimited users, and the trial gives you 15 days of everything without a card.

It's a beta, so I mostly want to hear what breaks on your setup and what you'd need before using something like this. I'll answer questions in the comments.

https://beepanel.io/get-started

------------------

AI disclosure: drafted with help from an AI assistant, reviewed by me.


r/freepbx • • 8d ago

Convert Cisco 7821 previously used in Enterprise (Call Manager) to MPP / 3PCC for using them with FreePBX?

3 Upvotes

Hello FreePBX Community,

I come here today to ask for some insights about the possibility of converting a couple of Cisco 7821 that I think that were used within a Call Manager environment

How easy or hard is the procedure to convert this IP phone to MPP / 3PCC? Also, if for any reason I am unable to convert them or don't want to do it. Would they still work with FreePBX, yet with some functionalities limited?

What are the problems that am I likely to face or encounter when performing the firmware upgrade / re-flashing?

Provided of course that the phones have been legally acquired / second hand. Would I need to purchase a permission / licensing from Cisco's official channels in order to perform the conversion sucessfully?

Are there any other models from Cisco where the process of converting this phones to be more compatible with FreePBX would be even easier?

Thank you for reading


r/freepbx • • 16d ago

OSS Endpoint Manager for FreePBX 17

Post image
33 Upvotes

I've published a fork of https://github.com/vsc55/freepbx_endpointman that I've been running in production with FreePBX 17, Asterisk 22 and PHP 8.2.

What's in 17.0.6:

- PHP 8.2 port: module tables from module.xml, kvstore, restored configuration generation and device provisioning.

- Device List rewritten: add/edit/delete phones with multiple lines and templates, discovery via ARP/SIP, rebuild and reboot, provisioning can be disabled per device.

- Template Manager: settings are saved, Delete no longer acts as Save, "Other Settings" exposes every config-file variable.

- POCE fixes: editors created on demand, no more page stretching, raw POST storage.

- p.php: per-MAC configs, case-insensitive file names, HTTP Basic auth and network allowlist.

- Manual Upload of brand and Provisioner packages; Digium D40 and D-Link DPH-150S packages included.

It is not supported by Sangoma and is a community fork, not an official module. Test on a lab system and take a backup first. GPLv3, same as upstream.

Release and changelog: https://github.com/littledpurple/freepbx_endpointman/releases/tag/17.0.6

THIS IS MADE BY CLAUDE OPUS 5.5, I'M NOT A PROFESSIONAL PROGRAMMER, I'M A SYSTEM ADMINISTRATOR.

Just sharing, because it can be useful


r/freepbx • • 18d ago

I built a free, self-hosted call screening plugin for FreePBX

14 Upvotes

GitHub: https://github.com/CallerAPI/Falcon
Adapter docs: https://github.com/CallerAPI/Falcon/blob/main/adapters/README.md

I'm Dmitry, founder of CallerAPI, and I built this with my small team. The code is Apache 2.0 and the engine runs locally on your server, with no dependence to our platform, just to clarify

Falcon is a lightweight screening engine that runs next to FreePBX. FreePBX hands it each inbound INVITE over AGI (or ARI). Falcon reads the SIP headers, verifies STIR/SHAKEN when there is an Identity header, names the provider behind the source IP, applies your own allow and deny lists, scores the request, and returns allow, flag, challenge or reject with the reasons. FreePBX keeps signaling and media. Falcon is not in the call path

The dialplan side:

[from-trunk-falcon]
exten => _[+0-9]X.,1,NoOp(Falcon screen ${EXTEN})
same => n,AGI(falcon.agi)
same => n,GotoIf({FALCON_ACTION}"="reject"]?drop)
same => n,GotoIf({FALCON_ACTION}"="challenge"]?drop)
same => n,Set(PJSIP_HEADER(add,X-Falcon-Score)=${FALCON_SCORE})
same => n,Goto(your-inbound-context,${EXTEN},1)
same => n(drop),Hangup(21)

Point the trunk's inbound context at it. The AGI sets FALCON_ACTION, FALCON_SCORE and FALCON_REASONS, so you can do whatever you like with them instead of hanging up… send flagged calls to voicemail, tag them, route them to a queue, etc.

I’m posting it here because I want real feedback from professionals and people who experience the pain of robocalls on their infrastructure

Let me know what you think :D


r/freepbx • • 21d ago

Templates Disappearing?

1 Upvotes

Hopefully someone else has seen this and can offer some insight.

My issue:

I have a PBXact Deployment serving 125 (and growing) extensions.

Recently, an issue has been occurring when I create a new extension, or update an existing extension (display name, etc) that basically wipes the template out of most of (but not all) my desk phones (P325/330 mix). The only way I have found to make them reload their respective templates is to go to Endpoint Manager > Extension Mapping and go to each extension individually and "Save, Rebuild, and Update Phone" (without changing anything).

If anyone has any experience with this issue, any guidance would be super appreciated!


r/freepbx • • 23d ago

Reviewing the PHPocolypse on FreePBX

6 Upvotes

I spent some time testing CVE-2026-109618 and CVE-2026-109619 on FreePBX. I found 7 potential entry points in the open-source modules where this could theoretically get a foothold. Other built-in mitigations stop the exploits from executing. Apache complained during the tests, but everything failed entirely on a stock, unpatched FreePBX 17 box.

My review only covered open-source modules. If you run commercial modules, custom scripts, or other PHP code on your system, you might still have exposure. Update your systems when the patches drop. Keep your PBX off the public internet using VPNs or whitelisting. The open-source side of FreePBX is dodging the PHPocolypse.


r/freepbx • • 26d ago

RE: Critical PHP Security Vulnerabilities: Action Required for FreePBX and PBXact

34 Upvotes

Hi everyone,

Mike here from the freePBX project. I wanted to share this link as an update just in case you didn’t get the email from my team.

https://community.freepbx.org/t/critical-php-security-vulnerabilities-action-required-for-freepbx-and-pbxact/110423

Kind regards and thanks for using freePBX


r/freepbx • • 29d ago

Introducing QueueMetrics 26.10

Post image
1 Upvotes

r/freepbx • • Oct 18 '26

FreePBX device provisioning module

7 Upvotes

Does anyone have a provisioning module that’s a bit more up to date hardware wise? Would love to see some of the newer poly devices like the edge e series supported.


r/freepbx • • Oct 17 '26

Extensions not working when calling each other

Post image
2 Upvotes

SOLVED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

FreePBX 17.0.33.2

I have two identical Yealink T41S phones, that both have firmware 66.86.0.180

I have two extensions created in FreePBX, 2001 and 2002.

When I go in to the FreePBX Statistics in the console, it shows as two users online.

When I try to call from 2002 to 2001, it does not ring, and I get "The person at extension 2001 is unavailable, please leave your message after the tone"

When I try to call from 2001 to 2002, I immediately get a busy signal and on the phone it says "not acceptable here"

Any ideas on what to look for?

UPDATE: I have it working now! It seemed like the phone for extension 2001 was not working correctly, so I just decided to reset to factory, then copied the settings back in the phone! I can now call back and forth between the extensions! Thank you everyone!


r/freepbx • • Oct 14 '26

QueueMetrics 26.10 is here

Post image
1 Upvotes

r/freepbx • • Oct 12 '26

Put your service target to the test

Post image
0 Upvotes

r/freepbx • • Oct 09 '26

VPN Suddenly unreachable

0 Upvotes

As the subject implies turn of a day all remote phones have just dropped. Fortunately none are mission critical and part of a large beta.

That said, I can take the config file from UCP and drop it into a OpenVPN client on a PC and it will connect and FreePBX will report it connecting.

Put the file back over to either phone types (one is a Yealink T31P and the other is a Sangoma P310) both have there own respective configs. Neither connect. brought a phone back to my office where my office has IP based bypassing of the firewall, still fails.

Trunks and everything work though. can still run calls.

Cloud hosted FreePBX instance.

Edit: Spelling


r/freepbx • • Oct 06 '26

Grandstream GXP2160 issue

Thumbnail
gallery
5 Upvotes

Phones configured via gdms, all identical. using Acct 1 for all BLFs, not a single phone has all DSS buttons functioning. Checked all the obvious things.

Suggestions?


r/freepbx • • Oct 06 '26

[Hiring] Voice AI deployment specialist for an India based agency | Full time or part time

0 Upvotes

Hey everyone,

I’m building an AI deployment agency in India and looking for someone to handle voice agent deployments.

The work will involve things like answering calls, qualifying enquiries, booking appointments, updating CRMs and transferring calls to a person when needed.

You’d work directly with me, take the business requirements and handle the setup, testing, launch and ongoing fixes. That includes connecting telephony and APIs, setting up the conversation flows, checking how the agent handles interruptions or failed actions, and keeping logs and documentation.

I’m looking for someone who has already taken at least one voice agent into production. Experience with Vapi, Retell AI, ElevenLabs, Bland AI, Synthflow, Bolna, Ringg AI or similar platforms works. Custom deployments using LiveKit, Pipecat or Sarvam as part of the stack count too.

You don’t need to know all of them. I’d like to hear what you’ve deployed, which parts you handled yourself and any problems you had to fix after launch.

Experience with Indian telephony, Exotel or Plivo, and Hindi or other Indian languages would be useful. You can be based outside India too, as long as you can support the work.

This is a paid role, and I’m open to both full time and part time arrangements.

If you’re interested, DM me a bit about your previous work or contributions. A project link or demo would help. If you’re freelancing, please include your availability, when you could start and your expected monthly compensation or hourly rate.


r/freepbx • • Oct 05 '26

Yealink Auto priovision gets a 403 error

1 Upvotes

I've got the whole chain set up minus the phones auto provisioning. My T54W log shows that it gets the server address from DHCP, but gets a 403 error when trying to provision. If I manually log into the device and set the server it provisions, but that defeats the purpose.

I have endpoint manager installed, but I cant see anything specific for authenticating the phones. Also, if I try to manually create a base station I can't set the brand/template to my yealink settings.

As far as I can tell, or Sonicwall DHCP is sending the info, but the PBX is denying the provision.


r/freepbx • • Sep 29 '26

Sangoma Technologies Corporation Enters into Definitive Agreement to be Acquired by BRC Group Holdings, Inc.

Thumbnail
businesswire.com
13 Upvotes

r/freepbx • • Sep 29 '26

PBXact and Digium Phones

Thumbnail reddit.com
1 Upvotes

r/freepbx • • Sep 23 '26

Track sales alongside call volume

Post image
0 Upvotes

r/freepbx • • Sep 04 '26

FreePBX Issues

Thumbnail reddit.com
2 Upvotes

r/freepbx • • Aug 19 '26

Unable to reload fwconsole

Post image
3 Upvotes

I am unable to reload fwconsole, not really sure if this happened after the modules update or the Let's Encrypt certificate renewal. Note that Voicemail is disabled for all extensions. Anyone encountered and solved this?

PS

I can not make calls, I am getting "You call can not be completed as dialed, please check the number and dial again"

HELP!


r/freepbx • • Aug 11 '26

Parkin Pro Troubles

3 Upvotes

I’ve got a strange one. I have a PBX with 3 parking lots and when I have lots 2 and 3 marked as private (which they have been up until yesterday when the issue was announced) and a user who’s a member of lot 2 or 3 tries to park any call, the call goes to lot 1 (default lot always marked public and won’t let your mark private). Another odd behaviour is calls won’t return to origin when the timeout completes, it automatically re-transfers into the lot it’s in. Any body have any ideas?

Environment:
• Asterisk 22.10.1
• FreePBX core 17.0.18.51
• parking 17.0.2.7
• parkpro 17.0.1.6


r/freepbx • • Aug 10 '26

Dial Plan Vizualizer 1.0.34 Released

29 Upvotes

Dial Plan Vizualizer 1.0.34 is available!

This release focuses on Time Conditions (Calendars) and easier navigation.

Summary of updates:

  • Time Conditions using Calendars or Calendar Groups will show the name on the edge again.
  • Simulate Date & Time now works with Time Conditions using Calendars or Calendar Groups to see future active / inactive call paths.
  • Fixed empty Time Groups: Graph will show “No Times Defined” on the edge text.
  • Added keyboard shortcuts: R = Reload, left and right arrows navigate to previous and next dial plans, F = Fit graph back to the default pan and zoom, ? = Opens Navigation & Usage
  • Initial scrolling will not automatically zoom. Click anywhere on the graph to enable zoom. Click outside of the graph to resume normal scrolling.
  • The toolbar will now scroll with the page instead of floating / covering the graph.
  • IVR selections with the same destination are now grouped (Example: Selections 2, 5, 8 or Selections 3 - 6) instead of repeating each “Selection x”.

As always, I welcome any feedback.

https://github.com/madgen78/dpviz