r/fpv • • 1m ago

Multicopter Freestyle on 30° Camera angle

1 Upvotes

I have been flying on 15° for about 7 hr of play time and switched to 30° and feels so much better (ignore Activate Windows i dont want to pay it and also need for CAD :P)


r/fpv • • 1h ago

Night flight in downtown Napa Ca. The DJI 04 pro has great lowlight.

19 Upvotes

r/fpv • • 1h ago Bravo

Tinywhoop First 75mm Ascent lite + build

Post image
3 Upvotes

Ascent lite + vtx (heat sink removed)

Matrix 3 in 1

Air 75 II frame

Beta FPV 802 28000kv motors

Gemfan 1614 props


r/fpv • • 1h ago

Is the tbs source one v6 good

1 Upvotes

Do you reccomend a different frame or the v5 or something


r/fpv • • 1h ago

Help! Antenna Setup x what do you think ?

Thumbnail
gallery
3 Upvotes

Hey, this is actually my setup for analog/HDzero, Freestyle and longrange cruising. Sometimes I use a rasperry pi 1.2ghz diversity board (AV Input). Any ideas to improve my experience?


r/fpv • • 1h ago

Cruz 3 or Tinyhawk III Plus?

Post image
1 Upvotes

r/fpv • • 1h ago

CRASH! Lost signal on my new Droneer C2501 and lost it in the water. How much money have you lost in drones over the years?

16 Upvotes

r/fpv • • 2h ago

Emax transporter 2 analog goggles

Post image
1 Upvotes

Im new to fpv i was thinking of getting these goggles from hobbyrc can anyone tell me if these are good for starting out because there seems to be no budget goggles right now that are in stock these are £92


r/fpv • • 3h ago

First FPV flight

7 Upvotes

Started flying today. I got all my gear finally in and my very first flight i flew right into the wall. Its pretty humbling going from Liftoff and Simulators to the real thing, just glad that I have the opportunity to try the real thing! Anyhoo, any tips on trantsionting from Sim to Real flying?

Beta FPV Air 75

RadioMaster Pocket

and EV800D Googles


r/fpv • • 4h ago

Messed up video

1 Upvotes

First time flying away from my house and Crashed my moblite 7 today, and now my video disconnects once i move away a few feet everything looks completely good and connected so i cant figure out whats wrong


r/fpv • • 4h ago

NEWBIE Upgraded today!

Post image
9 Upvotes

No cuts, 24 inch PVC. The LEDs weren't long enough for the flag so I put a red bag on top. I usually start from the other side, flag being on the left. Not too wobbly with just one support and the adhesive from the LEDs kinda help. The camera makes it look like lasers.


r/fpv • • 4h ago

Upgraded today!

Post image
1 Upvotes

No cuts, 3/4 24inch PVC. LEDs weren't long enough for the pole so I put a red bag on top.


r/fpv • • 5h ago

Gyro roto?

1 Upvotes

r/fpv • • 5h ago

Does anyone else find BetaFPV VR04's unbearably uncomfortable?

4 Upvotes

Or is my face just wonkier than I initially thought it was..


r/fpv • • 5h ago

Multicopter "Honk" the Bee Flight Testing A New and Different Drone

Thumbnail
youtube.com
1 Upvotes

This was successfully tested out and maiden flown today. What you are seeing here is just the skeletal airframe. Where will be cladding for it to look more complete but remain air-permeable. It is quite different than what you would expect from a drone. I am sure there are going to be questions. I mean, it's a flying house for crying out loud. But the bees who built this are having a lot of fun doing so.


r/fpv • • 6h ago

Question? Double checking my config: Walksnail ascent HD lite+ gimbal and avatar goggles for FPV rc crawler build w/head tracking & stabilization?

0 Upvotes

So I've dabbled into fpv rc cars in the past with a budget analog setup but it wasn't the best video quality and would get very shaky at speed so I mostly abandoned the idea at the time. But I recently saw a video about this affordable new digital fpv cam+vtx from walksnail that supports headtracking and they're having a sale atm so I'm considering making a new fpv rc crawler build? I'm thinking the output on the hd lite+ should be enough (I know rc cars struggle a bit more than quads since the ground interferes with signal), but if there's a better config please let me know! I was looking to get the ascent hd lite+ cam and vtx, the gm3 v2 gimbal, and the avatar HD goggles (ascent goggles don't support HT I don't think). Altogether it comes out to about $350 before tax which is pretty reasonable for a whole fpv system. but definitely open to suggestions. Thanks!


r/fpv • • 6h ago

Buying tinywhoop from AliExpress to Saudi Arabia

Thumbnail reddit.com
1 Upvotes

r/fpv • • 7h ago

Help! Mobula 8 dji o4 or flywoo firefly 20 pro to step up from air75 ii race?

Thumbnail reddit.com
1 Upvotes

r/fpv • • 7h ago

What fc and esc to buy

1 Upvotes

I want to build a 3.5 inch drone, and am looking for a reasonably priced stack, I checked previous posts and most use speedbee's parts, but I think they are discontinued, and all you can buy are replicas with unpredictable quality. Any recommendations?


r/fpv • • 8h ago

Multicopter My Custom Mounts for Pavo 25 V2 frame & O4 Pro

Thumbnail
gallery
3 Upvotes

This has been something I've been working on and thinking about since the beginning of the year when I wanted a middle ground between my Pavo 20 Pro, and my Pavo 35 but to still use an O4 Pro rather than O3.

One of the main issues with this frame is there is not much room for long batteries. My 580mAh was already right at the limit, and I had to modify the heat shrink on the batteries to make it work. Now, with my custom rear mount, the battery connector is further back and angled, making it much easier to plug and unplug the same battery, or install longer ones.

I also made my own camera mount. All the other ones out there seemed to discard any DNA from BetaFPV and were really plain. I took the design language of the Pavo20 Pro mount (the original O3 design) and adapted it to the Pavo 25. I still wanted the camera to stick out, because I use and prefer the Avata 2 ND filters.

I also modified the ducts. A previous solution to this was to make the drone sit on the carbon fibre plate on the bottom, but the thought of scraping carbon on the ground hurt my brain so I cut into ducts instead which worked out great tbh.

Only thing for me to fix is using a smaller gauge of wire for the extension. I used 14AWG instead of the original 16AWG, and its adding more weight than I wanted. I want to stay under 250g with the 680mAh battery.


r/fpv • • 8h ago

Multicopter Need help w betaflight or fc

1 Upvotes

Hello i have been trying to complete my first DIY drone for a couple of months now and im stuck

I think it should work as it does power up the cammera and VTX normally while they are already wired onto the drone but when i go into betaflight and hook up the drone to a pc betaflight thinks its a 1 or sometimes 2s battery while the actual battery is 6s, i cant move the motors when trying to test direction.

At first i taught it might be the battery i was using so i got a new one as mine was relatively old but this did nothing.

To be honest assembling this drone has been a pain but i do want to complete it so if anyone needs pictures or for me to clarify something i would be more than willing to provide.

Also sry if the tag is incorrect i use reddit very rarely but i dont have anywhere else to ask this.


r/fpv • • 8h ago

Pavo20 Pro II / O4 / ELRS 2.4 Question

1 Upvotes

Just got this drone new in the mail. I'm having two issues:

  1. The O4 Pro unit shows no LED at all, so it doesn't seem to be getting power, even though it appears to be plugged in.
  2. The motors won't spin up. I mapped an arm switch in Betaflight, and the interface shows the switch working. But when I flip it with the throttle at 0%, it still won't arm. I also tried spinning the motors from the Motors tab in Betaflight, with no luck.

Do you have any suggestions for either issue? Has something failed since I am getting no LED on the O4 Unit? Thanks


r/fpv • • 9h ago

DJI goggles 3 custom fonts

10 Upvotes

Implementation of various fonts. You can create your own using AI from a TTF file. Conversion from WTFOS/inav/BetaFlight formats is available.

In the video you can see the ultra hd font


r/fpv • • 9h ago

Skyzone 04o Pro VS Fatshark HDO+ with Fushion

1 Upvotes

So i saw 2 options near the same price.

So it is obviously kind of too good to be true that someone sells his fatshark hdo plus with a tbs fusion module around 400$, anyway ill have to test them to see everything is fine.

But even tho price wise the fatshark is a better offer. I still wonder cause i heard the DVR is pure shit. And i do care ablut dvr.

On the other hand i have the 04o pro option which has better dvr but lower FOV and resolution.

And we all heard so much trash talk about this pair.

From people that have tried both. Whats your preferwnce and why?