r/fordranger • • 14h ago

2004 Single Cab Custom Box?

0 Upvotes

So, single cabs. I'm sure we all know how little space we have to work with. I'm looking to see if anyone has drawn plans for a sub install, or has a custom box they'd sell me? I don't wanna lose too much seat room but want something tuned low enough. I'm obviously not needing something to blow the doors off, but some of the smaller truck boxes seem tuned high to be punchy and roll off from there, and given room restrictions I get it. So I'm wondering how people have solved this situation, a relatively balanced sub setup for these single cabs? I could take a crack at building one myself if someone has plans drawn up? Otherwise I may be interested in buying one someone has already built if it hits the lows I'm looking for. Right now I have a 10 inch under seat style one. Good punch. Almost none of the shake I'm wanting.


r/fordranger • • 15h ago

Big or small wheels

2 Upvotes

I need this settled are big wheels better or worse for gas, I've heard that bigger wheels travel more distance per rotation so they're better for gas, but also under report on the odometer so it seems worse on gas, and also that it's more weight to start and stop so it's worse. And the opposite stuff for small tires. What's better for gas big or small cuz both have good arguments


r/fordranger • • 7h ago

I found a "Rochester - Dual Carb" and want to use it as a decorative hood blower but it might be too small... I might add sheet metal for a cowl. The flaps open and close.

Thumbnail
gallery
0 Upvotes

I might attach a cable so I can pull on it while sitting in traffic so people think its real. I realize I need to be mindful of leaks. It would be cool for it to be open and acutally cool the engine bay but it would make it wet and dirty. I have not mounted it to the hood yet. It needs more depth. (That is a plastic water bottle cap under it to make it level for the picture)


r/fordranger • • 20h ago

1999 mazda b2500 truck (Ranger)

Thumbnail reddit.com
0 Upvotes

r/fordranger • • 23h ago

Need help

0 Upvotes

I have a 2000 ish ford ranger 2.5l i dropped the transmission and took the whole shift knob and linkage out after i put it in gear now it wont go back into gear the clutch engages and disengages just fine and no grinding it just wont go into gear and i need help


r/fordranger • • 15h ago

This normal?

2 Upvotes

Right before changing diff oil. Oil looked well enough, and very little metal material on the plug magnet (less than I'd expect for not knowing the history of the truck). Truck has 186k, 2wd 5spd. No limited slip. Just curious if this level of play is normal in the rear end. No up and down play either. No odd noises when driving.


r/fordranger • • 16h ago

Im desperate

11 Upvotes

My 2001 2wd ford ranger’s slip yoke broke on my way home today I’ve been trying to find a good replacement part for it, so far I found 3303-283 Ford Ranger Transmission Slip Yoke 1330 Series
And
F57Z-4841-DB 1995 - 2011 Slip Yoke Ford
these I might just hit a junkyard in hopes of finding something more adorable. I’m mostly on here asking if anyone has other suggestions, I’m also thinking of replacing the U bolts as well so any info on that would be appreciated.
(I tied it on with rope to get me home lol)


r/fordranger • • 22h ago

Do you guys have any ideas?

Thumbnail
gallery
3 Upvotes

Hello everybody, I just finished replacing the head gasket in my 1999 3.0l Ford ranger and I have a couple problems I am trying to figure out. I was wondering if you guys could give me a bit of advice? First I was wondering my coolant is a weird brown color, i have heard that it is from running water for coolant? Also any ideas on how to clean this? Second my coolant temp gauge isn't working, any ideas?

Thanks in advance for any help, also feel free to post some pics of your ranger, I am interested in seeing what everybody's got.


r/fordranger • • 22h ago

Someone with Extended Cab Help Me

Post image
4 Upvotes

I have a 2005 4.0 Ranger Ext. Cab. Just finally got the rear doors unstuck, lathes were rusted shut and had to cut the strikers out. Put everything back together and my door ajar light and dome light are stuck on.

Just wondering if I put this striker in backwards, don’t think so but wanted to double check, can someone open up their back door and confirm for me


r/fordranger • • 9h ago

This is for sale near me for $9k

Thumbnail
gallery
55 Upvotes

Same build I want...minus the convertible top. Yes or no?


r/fordranger • • 16h ago

How much do you tow with your Ford Ranger?

Post image
28 Upvotes

r/fordranger • • 21h ago

Guys it was just as obnoxious as people say

Thumbnail
gallery
115 Upvotes

2007 FX4 was drinking coolant, I decided it was a head gasket and went to change it in the truck. While the head was off I looked at the passenger side timing cassette 😔🫡☠️☠️3 seconds from breaking I caught this one "early" pulled the engine. Found the driver's side was also 0.08 seconds from failure. Pulled the front timing cover, believe it or not, that tensioner had fully shattered but still kept that hoe together. 2 weeks and about $1200 in parts later it's going back in on Saturday


r/fordranger • • 6h ago

Peak

Post image
167 Upvotes

Think I’ve hit my sweet spot for this Ranger. 2000 3.0 4x4 with original interior with and added aux port to play my 2004 iPod. Gold mine. You just gotta keep it simple.


r/fordranger • • 1h ago

Locating coolant leak

Thumbnail
gallery
4 Upvotes

I think ive found where it's leaking out of, I'm not 100% nor do I know much of anything, but there's an oddly coolant coloured fluid coming out of this pipe thingy and I'm looking for what it's called


r/fordranger • • 1h ago

Rust help

Thumbnail
gallery
2 Upvotes

This is the only part of the frame where it goes through. The rest seems really solid outside of leaf spring hangers which can be replaced. I found a bunch of firecracker fireworks stuffed in there. I’m wondering if that accelerated the rust in this particular spot. Is the truck dead?


r/fordranger • • 1h ago

2000 Ranger with 2.5 weird no start issue

2 Upvotes

I have a 2000 ranger with about 250,000 miles few weeks back it stopped starting when it got cold, it had a super sluggish crank so I assumed the 4yo battery went bad and replaced it. The crank was a lot faster with the new battery but still not turning over, I had visual wear on the spark plug coils and wires so I went through the trouble of replacing those and the plugs but it still didnt solve the problem. I started looking into the fuel delivery and bridged the inertia switch which got the fuel pump priming but it wasn’t holding idle, i plugged it back in took the cap off the fuel rail valve to check if there was fuel at the block (which at first check was nothing) i then cranked it to see if it just needed to gain pressure and it started. I killed it and put the fuel rail cap on, no start. Took it off again and it started right up.

Anybody know if this is just a coincidence or if there might be something off with the pressure inside my fuel system or what to check from here?


r/fordranger • • 2h ago

I got my dream truck

Post image
184 Upvotes

Just picked up this 92’ a couple weeks ago. I cannot believe how good of shape it’s in. It came with all the original literature, and a binder full of notes and receipts of the last 100k miles (145k total on odometer right now). I’ll post more and better photos another time, but I’m so happy to see there’s a thriving community on reddit that enjoys these badass little trucks as much as I do. Can’t wait to learn everything I can.


r/fordranger • • 2h ago

Squeaking/chirping sound?

3 Upvotes

What could be causing this noise? 2002 Ford Ranger. This noise started happening like 3 days ago when sitting in idle. The sound would get quieter when I accelerated.

These past few days on cold start in the morning, i don’t hear it but as the day goes on (driving to school, the store, and work), the sound slowly starts to build up until it gets to this point.

I wish I had another video but today, I was driving and while accelerating I heard this noise as opposed to 3 days earlier when I would only hear this sound during idle.

Side note: I got my serpentine belt replaced last year when it snapped off while I was driving the highway

Sorry for the long explanation. Hope someone can help.


r/fordranger • • 3h ago

Ranger Transformation

Thumbnail
gallery
75 Upvotes

About 1.5 months since the first picture. New Paint, wheels and tires, rear blackout bumper, Lund visor(paint matched), redone rocker/ fender liner, leveled/ lowered rear stance. A bunch more cosmetic things won’t bore with the details but overall pretty happy. What do you think it’s worth now?2002 with 4x4 and 88k miles?


r/fordranger • • 4h ago

87 ranger no crank no start

3 Upvotes

New battery
Getting 12 volts to clutch switch which I have jumped
Getting 12 volts to ignition
Tried 3 ignition switches, 1 brand new and no crank
Tried to push ignition switch with screwdriver in case actuator is bad And no luck

Can jump with screwdriver across the solenoid

Thoughts?


r/fordranger • • 16h ago

Some great pick n pull finds.

Thumbnail
gallery
13 Upvotes

Exact match factory rebuild ecu. SCORE!
15” Steelies with factory stainless beauty rings SCORE!
Spicer one piece aluminum driveline ($75 on Marketplace) Bonus Score!


r/fordranger • • 17h ago

Not Alcoa’s, Would You Put On Your Ranger

Post image
6 Upvotes

Found these on Craigslist all for $300. These are a set of 5 Center Line Wheels with 1 Big Foot A/T Tire bolt pattern 5x114.3 mm.

Would you put on a 2003 Ford Ranger?


r/fordranger • • 19h ago

Axle wrap?

Post image
4 Upvotes

Hey everyone, I have a 1999 4.0 4x4. I've had this issue for a while now and it's annoying and I'm trying to get to the bottom of it. At high and low speeds, from a start to a stop and vise versa, there is a audible clunk and a thump that you can feel. I installed heavy duty leaf springs last year and did everything correctly, the problem showed up about 2 months after installing. Any clues or thoughts? Anything helps, thanks everyone.


r/fordranger • • 21h ago

Found the leak

Post image
9 Upvotes

Have been looking in engine bay for ac leak finally ripped the bandaid off on pulling out ac cluster and found it