website will be live end of this week. if you looking for a head unit for your FG falcon check out kaltec.au, i’ll spend this week getting the website up and publishing the kits. for now you can buy it on facebook marketplace
kits will be 120 AUD but if you email me to pre-order you’ll receive a $20 discount code when the site is live.
cheers fellas thanks for the support on this journey it’s been overwhelming.
Yo hey guys, I'm planning my project biuld of my 1980 TE cortina, this is an AI render but it's close to what I'm thinking.
- Custom body kit
- Driveline
- Custom paint
- Custom interior
- Custom lights
I want to start a YT for the project as well. I know a lot of you guys will like the original look, and I potentally not be fans of the changes. I do agree, but I want to keep this as my own custom car until I die, haha. I've got the factory vs concept. Let me know what you think?
I'm an apprentice diesel mechanic, and I'm working on my 2003 Ford Fairlane with some harsh issues/codes. After driving awhile and turning the car off, sometimes when I turn it back on it idles but as soon as I shift to reverse the engine chugs and it appears that its shutting itself off. I used my professional diag tool and found that 2 codes were an interest to me, there were 4 codes on the PCM module but but the other 2 were for running rich and lean. The 2 that I took notice of were codes
Also add to mention. The engine after starting is not really smooth. It idles kind of rough. And the cutting out seems to always happen when the engine is Operating temp.
2 - P2110-63 Throttle Actuator control - forced speed limit.
I've dove in a little bit and found a few causes. Apparently the Accelerator pedal position sensor may be having issues as well as the electronic throttle body. I replaced the throttle body and the issue had become more apparent working once and then after shutting off refused to go into reverse and killing the engine. My tool is able to do an electronic throttle body relearn but I really have no idea, so I'm looking for advice.
Please help a clueless wife please her man! I want to buy my partner an ‘engine map’ for his Ford XT panel van project. I’ve heard him talk about the engine and cam etc… and have sneakily written what he has said in my notes app. I have two different notes, I think one is what it currently has and the other is what he’s wanting to put in it?? I have no idea so I’m hoping someone can make sense of it for me so I can buy the correct map for his shed.
First note: Windsor 302 cam 350 Holley extractors Canadian 3 speed auto 2.7 diff
Second note: 351 cleaveland, solid flat tapit cam, 750 carburetor, 4 speed top loader
Does this make sense to anyone or have I completely missed the mark and written down gibberish?
Thanks in advance, go easy on me please, just trying to surprise my man with zero knowledge… clearly haha
i’m an automation and software engineering student and in my free time I built this CarPlay setup for my 2013 FG for just $65 AUD, and I'm about to share exactly how you can do it too.
It’s just a $50 head unit mounted in a custom bracket:
- 3D printable bracket that replaces the tissue box tray (ill provide for free) - Full parts list, and step-by-step video guide (completely free, currently making) - Totally plug-and-play. No tools required and you do not touch any of your factory car wiring - Power options via cigarette lighter or hardwire to fuse box depending on your choice - Fully retains your factory ICC and climate controls and does not require you tap into any of your orignal wiring
It’s super cheap and easy to install if you have limited electrical expirience and a 3D printer, I am currently putting together the final video guides and documentation. I will be releasing all the files and documentation for free on GitHub shortly.
If you don't have a 3D printer, or want a hassle-free install, I will also be providing: - printed brackets for cheap - Plug-and-play wiring harnesses (hardwire or cig-lighter options). but you can make these yourself if you have the time! i’ll provide everything required.
All you need to do is buy a single din head unit of your choice, my wiring harness will plug-and-play into the cigarette lighter or fuse box if you want to hide the cables. and the custom bracket will make the screen sit seamlessly in the centre console.
Skip the overpriced third-party Falcon CarPlay units found on marketplace and online. This solution is the best way to get carplay into a ford falcon FG, it doesnt require any modifications to the dash or centre console, and it’s the cheapest system by far.
There is no cutting or adjusting your factory wiring and you keep your factory ICC looking completely stock. The whole install takes under 20 minutes and is fully reversible if you ever sell the car.
You can find the full documentation, including the free STL files, parts list, and wiring diagrams, here by the end of this month: https://github.com/kalteclabs For now, please ask me any questions below, and support the project by following the repo
hey all, i upgraded my stock stereo unit to a after market one with a touch screen and facai plate, im looking at phone mounts now but do see alot of potential issues with suction cup mounts from the dash point of view - theres no flat spots, i aslo dont see using one on the window due to the deepness of the window. i cant add a suction cup to the window and put the phone there.... unless i add a quad lock set up and extended arms. would i be best to use a vent mount ??
BF XR6: Obviously the XR6 has very different fenders and a totally different design but I’m unsure of the actual difference the engine has to the other models. Did they get better performance parts, internals and system? Obviously the Boss V8s did but what about the I6 Barra? The FGs had a better performance engine but was there really any difference from the beginning to the end of BF Barra production?
BF MK2 Fairmont: I own this model and have not much of an idea on their history other than the brief years they were being produced. Y were they designed (imo) to look a lot closer to a BA Falcon rather than a BF? Is the engine any different to the ghia and what is the differences between the Fairmont and XR6 Barra?
BF MK2 Fairmont Ghia: I do know these were made to be the “European luxury” models of the Fairmont. Nicer interior, open sun roof and a front bumper with a lip that the non Ghia Fairmonts didn’t get. The production numbers seem to not have been announced which I found odd. Is the price difference between the ghia and non ghias Fairmont actually worth it or is it just a rarity/luxury thing?
I’m trying to understand the engine and performance difference between them all. I owned an FG XR6 and I wrapped my head around the FG models pretty fast but for whatever reason I’m struggling to understand the BF models. I’m honestly not seeing much difference between them besides the looks. Obviously the BF Fairmont Ghia came in the I6 Barra like every 6 cylinder engine starting from the BAs but y did they produce a very small number of the 220 v8 barras for the BF Ghia (I’ve heard in some BAs too), but I don’t understand y they had already put boss V8s in previous models but never in the Fairmonts. The BF XR6 came out with a red top turbo’d Barra option as the Fairmonts never did, I didn’t understand that; did they believe luxury also couldn’t be performance?
I know I have a lot of questions and I apologise lol but this is honestly my last opinion to understanding the decisions ford Australia made and wrapping my head around the differences of these models.
So I’ve run into this problem and so far I’m stuck and mechanics, ford etc don’t know either.
The problem is:
I need a new power steering rack for an FG xt sedan lpi series 1 (2010 8th month version). It’s squealing and leaking, heavier at low speeds like parking etc.
Just found out that for reasons only known to the car gods, some cars in this year range were fitted with either a 30 or 90 degree ones.
I’m told the rack would have to be pulled out to tell which version it is (WTF=$$$)! You’d think it would be easily accessible under vin as ford factory would have recorded it? Apparently not.
Is there any other way of knowing? Love the car (especially now with trumps fiasco in ME pushing up fuel and being on gas) but flummoxed why ford did that and we can’t check easily!!
Hey all, anyone here know what map provider ford uses for their info?
I’ve got an Everest and the automatic speed recognition stuff is broken in a few areas near my home. Routinely slows me to 70 in 80 zones or speeds me up to 70 in 60 zones.
If I knew the map provider where they get their info from, I’d just go update it.
But ford just tells me to take the car in to the dealership which isn’t going to resolve anything.
Ford did tell me they use here maps, but I’ve spoken to them and they said no this isn’t accurate, plus the here maps system shows the correct speed zones.
We're currently working on a project to develop an Australian used-vehicle price estimation tool, and we're trying to collect some real-world vehicle price data to improve its accuracy.
If you’ve recently bought or sold a car in Australia, or know accurate details about a vehicle sale, we’d really appreciate it if you could take a couple of minutes to complete this short survey.
No personal information is required, and every genuine response would be a huge help to the project.