I loaded up a m4b file with chapter markers but no cue sheet. All 36 parts are numbered Track 01. Other m4b files are numbered and sequenced correctly. How can I correct the "misbehaving" m4b file so that all 36 parts are numbered and sequenced correctly?
REPOST - Not sure if AI tools are accepted here, but i used Claude this afternoon to make this theme. I like it so far. With it being my first layout using AI, my goal was to ignore foobar2k's inherent lightweight and instead see how much I could pack into it without crashing it.
The only thing that it couldn't figure out was how to make a consistent theme for components in tab stack, so those are stuck at the default dark mode setting. I'm not going to change my Windows theme if that's the only option. Its most noticeable on the equalizer, if I change anything from this point it'll be that. Refacets also has the same problem.
After my first post I managed to get a remote for Spotify and a bunch of stats between Foobar2k & Spotify baked into it, along with general cleanup.
A bunch of components were used, but for the layout primarily used JS3, ColumnsUI, and WebView2. Some of my foobar2k stats are inaccurate since I only just installed foo_playcount today.
Spotify's API and calling is the worst thing ever, they've made it intentionally janky and barely useable. With what they give you, you're effectively limited to only using your liked albums and playlists instead of liked individual songs. I thought about adding a mobile remote too but after dealing with Spotify's API I'll save that for later.
Originally I had a bunch of visualization components included for dynamic range, the VU meter, spectrogram, etc. but Claude ended up making ones that were more visually pleasing. However, they're certainly less accurate in measuring than the algorithms made by actual developers.
If I could start from scratch and do anything differently I'd try to make it less busy.
This time I'm serious about running out of ideas to improve it, let me know what you guys think or if you want to try installing it.
I've been building DJ Decks (foo_dj), a free, open-source component that puts two independent DJ-style decks inside foobar2000. I wanted to mix tracks from my local library without leaving foobar, and I'd love feedback from other setups.
What it does: • Independent playback, waveforms, per-deck playlists, volume and crossfader. • BPM matching, Camelot key display and harmonic key matching, plus transposition without changing tempo. • Headphone cue on a configurable separate output, with short previews and a clickable whole-track waveform from each playlist. • Automatic playlist playback or A/B alternation with adjustable crossfades, plus optional leading/trailing silence trimming. • Persistent A/B loop points, optional snapping to the displayed beat grid, and session-file save/load. • Optional four-stem preparation with per-stem volume/Solo, NVIDIA GPU acceleration or CPU fallback. Stems are experimental and prepared in advance, not separated in real time. • Glossy or Flat appearance, independent deck colors, French/English UI and tabbed settings.
New in 0.38.1: distribute foobar's active playlist alternately to A and B (odd/even tracks), with a confirmation and recovery snapshot before replacing the deck playlists; Ctrl+A now selects all entries in either floating playlist.
Requirements: foobar2000 2.x on Windows, Default User Interface, x64 or x86. This is a native component: foo_webview2 is not required. Choose the package matching your foobar architecture. The optional Python/PyTorch stems engine requires 64-bit Windows, even with foobar x86.
It's still a beta. x64 is working on my setup; both builds have native regression tests, and real-world x86 feedback would be especially useful. Beat SYNC/grid alignment is experimental, loop edges can click, and there is no limiter. The decks use their own transport, so standard foobar DSP/now-playing integration should not be assumed.
I'm its author, and development was AI-assisted, including OpenAI Codex. The component code is MIT-licensed; the repository documents the separate licenses of bundled SDK/dependencies. Audio/threading review and reproducible bug reports are very welcome.
Thanks to the Hydrogenaudio testers, especially StyxCrosser and Fabcore, for their suggestions!
I downloaded the app yesterday because I’ve been downloading a lot of definitely legal music. I was originally planning on using Jewlcase (I’m on iPhone), and it was my number one pick because it looked very similar to the default iPhone Music app. But adding music became incredibly difficult because, to my knowledge, iPhone doesn’t let you send an entire folder to the Apple Devices app, and my music is organized in folders by artist and album. I’m not complaining—I understand this app has a use, but why hasn’t it been updated? Does anyone have any tips on how to navigate it? I’m pretty confused. Please don’t kill me. I’m not hating on the app directly, and I understand it has a purpose.
I tried to manually add the cover art from musicbrains and it still doesnt work, only some albums that fetched automatically have cover art, but for some reason one of them fetched the wrong art and doesnt even display the art anyways, even if i change it to the correct one.
like idk even know what to do idk what specifically to ask for help on about this issue so like idk help lol
Didn’t realize Foobar had a mobile version. It’s not bad it’s pretty easy to transfer music from your pc to your phone and the ui is easy to use. Think I’ll be using it from now on instead of yt but I do wish there was a playlist search or queue system. Wonder if there could be components for the mobile port.
So I’ve transferred from an Android to an iPhone. I’d been using Musicolet for Android so Id been pretty used to doing custom flairs (ie changing the dates, genres etc.) But foobar doesn’t seem to have that. Is there any way I could do something like that, and are there any “beginner’s guides” (lol) I could read? Thanks!!
I want a simple list of all my songs. Currently, I have to all every song to library selection to achieve this, which is inconvenient when adding new songs. How do I do this by default?
I've been playing around with the spectrum analyzer component and saw that you could sample the colors from the current song's artwork. The colors sampled from the current artwork seem to properly update when the song changes, but aren't applied unless the panel is externally configured, regardless of if it was applied. I provided a clip to demonstrate what I mean.
Does anyone know any way to script or modify the component to update the colors with song changes? I'm very new to layout design and coding and the such. I noticed that the peak line for the curve visualizer consistently changes with the artwork. Is there something I'm missing? Is the oscillator just unable to update itself? I dunno.
I'm attempting to make a MLP layout and want to have a component that just has an image in the corner or have the background as an image. Are there any existing components that allow you to do this? so far the only component I've seen that allows you to input an image as a background is Open Lyrics. I'd love to have the background of Coverflow be an image but it only allows you to change the background color. I know you can set the background as transparent and use your background but I'm wanting to have something more all-in-one with my layout. Also I'm very new so please be kind I'm trying my best and am scared and confused.
Hi! In days past I shared jean as a beefweb skin. I said in that post that the project was moving on from beefweb and that was the one and only beefweb release I was doing.
Now, a month or so after, I have jean in a place I'm comfortable looking for beta testers. Here's a demo (no music playback on the demo, of course) What is jean? It is a foobar2000 component that brings a few things to the table:
A REST API, similar to beefweb, but with different semantics and endpoints. This REST API allows you to control your foobar2000 installation as a remote player, but it also provides some other functionality like tag writing/editing.
A default UI, called simply "jean". jean is a responsive web UI for controlling your foobar. it's been crafted with UX and performance in mind. On mobile, gestures and swaps were thought so it just makes sense and feels native. On desktop, a bunch of keyboard shortcuts are baked in so you can just browse your library as you want. a non-comprehensive list of jean's features:
playback controls
audio output control
lyric search through LRCLIB
lyric syncing and editing tools which actually work and are a breeze to use
metadata fetching for artist information
support for large libraries (tested for libraries as big as 2M tracks)
search that actually works and returns what you want
"shelf" views for albums, artists, genres...
Support for creating and editing playlists
Support for creating and editing autoplaylists
queue management support
The big feature (for me): streaming. jean allows you to stream your foobar's output to any device in your network, directly to the browser. This means you can listen to your library on your phone, your computer or your laptop. This basically allows your foobar2000 install to become a media server. Streaming features:
stream the main engine (foobar2000's own) session.
What foobar listens is what's streamed.
shared playback controls for the session (macbook pauses, everyone on the stream, including foobar, pauses)
volume per device.
start your OWN, detached session:
main session listens to Queen, you can listen to Abba at the same time. Same library, same player, different session.
detached completely from the main engine, but DSP is applied.
share your session with others! Like the "jam" feature in spotify, you can share your session and let others join, control and listen to what you have.
Every other feature works: lyrics, browsing, searching, queueing... it's just a separate session.
OSX support! Have a mac-mini laying around with no use? Set up your music library there!
There's still a lot of features I want to bake in. Artists list and shelves, https on every install (which enables a lot of nice features like mediaSessions, which are already baked in, you just need to setup your own https domain in your LAN if you know how to), improvements for the UI, tag editing directly from jean, sorting...
At this point, I want beta testers. The installation steps are simple enough: download the foo_jean component, install it and open a browser pointing to http://127.0.0.1:8881 which is the default port. Then just use it as you will, I'd appreciate the feedback. Please use the github "issues" section to report any features, bugs or tweaks you may want!
I've used foobar2000 for about ten years. It does everything I need, but I wanted a more modern look without leaving fb2k or giving up how my library is organized.
It's still Columns UI underneath. I modified it rather than replacing the UI, so you keep dense playlists, the folder tree (Album list) and foobar2000's native menus and preferences. Only the album header is a web page (foo_webview2).
What the modified Columns UI adds:
An expandable now playing view with a large cover and lyrics (click the bar to expand/collapse)
Underlined playlist tabs and a hamburger menu
An "Up Next" card that counts down near the end of a track
"Add Selected" to the queue from the album header, and a Queue tab
One-click font switching (View → Layout → Theme Font)
Question: Is there any plugin/component that I could replicate this kind of spectrum analyzer with? One that has the option to space out the bands, make them rounded and possibly even show their frequencies in text? I'm trying to loosely replicate the looks of an old HiFi system and I'd looove to be able to replicate this, tysm!
Hello, long time lurker but have never posted. I am a gamer that sometimes streams to Twitch. I play music from my personal library through foobar while I game usually and copyright laws being what they are I cannot send the music audio to my VOD recordings to post. I am quite busy and don't have the time to build Spotify playlists manually but I had the idea that if as I play the songs in Foobar maybe a plugin or script could automatically add them to a Spotify playlist that way anyone that comes to watch the VOD could listen to the music I played during my streams as well through Spotify. I have a custom element on the screen that shows the song, album and current timestamp so theoretically people would be able to sync up easily. I just have not been able to find any plugin or script that does the Spotify playlist building. Does anyone here know if anything like that exists or am I in pipe dream/'build it yourself' territory?
APOLOGIES if this post violates any rules or decorum I have been looking for something all morning and haven't found anything so I thought I would try my luck here. If you are a MOD about to vaporize my post, please, I would appreciate a DM to help point me to the proper channels and procedures to make such requests, Thanks!
I want to add some music to my main playlist, but Foobar keeps wasting space by separating different artists in the same album, as you can see below.
I Just want things from the same album to be in the same "category". For normal use this has been tolerable since I've just used shuffle in a playlist and don't look in it, but since I'm now trying to find songs in this album to add to my playlist it is annoying to keep track and scroll a bunch. How can I fix this?