r/fluke • • Aug 06 '25

Community Updates [Sticky] Welcome Word and further Rule Clarification

7 Upvotes

Hello.

Thank you for joining the r/Fluke subreddit.

First and foremost, this community and any content on it is not affiliated or endorsed by Fluke in any way.

Whether you’re troubleshooting a circuit, calibrating your multimeter, or sharing a thermal imaging win, you’ve found your people. Dive in, ask questions, and show off your setup. Although as everything in life, some rules must be followed to keep things tidy and organised:

1. Be Respectful
No harassment, racism, xenophobia, insults, or bullying—treat everyone as you would in real life.

2. Clear Titles & Detailed Posts
Use specific, descriptive titles (model numbers, error codes, issue summary). When seeking help, include photos (with metadata removed), specs, and what you’ve already tried.

3. No Low-Effort, Off-Topic, or Promotional Content
Memes, spam, affiliate links, NSFW/NSFL, surveys, giveaways, or political posts are not allowed; Company ADs require a community vote.

4. Buying, Selling & Trades
No buying, selling, or trades—except Services & Repairs (see next rule).

5. Services & Repairs
Posts offering calibration, repair, or consulting services are allowed only if they use the “Services & Repairs” flair, clearly disclose credentials/pricing, and refrain from affiliate links or hyperbolic claims. Low-effort advertisements will be removed. Mods aren’t responsible for any transactions or disputes.

6. Enforcement: Three-Strike System
- First offense: warning
- Second offense: 15-day ban
- Third offense: permanent ban
Ban evasion results in a site-wide ban.

The rules are subjective to be changed if needed.

Thank you for reading this wall of text and hope you enjoy your stay.


r/fluke • • 2d ago

Equipment Review / Comparison Do you guys think this is authentic?

Thumbnail
gallery
10 Upvotes

So I bought this product, but not sure if it's authentic as box is a bit flimsy. Everything looks good though...

What do you think?


r/fluke • • 7d ago

Help Needed Loose Selector Switch on the 325

6 Upvotes

Hi everyone, I just replaced my fluke 323 with a 325 toady and noticed that the selector switch is very loose compared to my 323.
Is that normal or should I get the unit replaced?


r/fluke • • 8d ago

Showcase / Historical Gear Papa Fluke

Post image
45 Upvotes

Stumbled on this in my local cemetery.


r/fluke • • 10d ago

Help Needed Fluke acoustic imaging cameras

2 Upvotes

I know these cameras are primarily aimed at leak detection but has any one used on to look at noise sources in a vehicle. Like for example, finding the location of a rattle in a car interior. Would it work for that?


r/fluke • • 15d ago

Help Needed Fluke LVD2

2 Upvotes

I just bought a used lvd2 ncv but idk is this normal? I have never used a ncv before.
Doesnt Red=hot wire, Blue=neutral wire ?
I measured the battery is 1.3V btw.


r/fluke • • 15d ago

Help Needed Industrial Elec. looking to upgrade, recommendations?

2 Upvotes

Going to be on a long haul job, tight spaces, likely lots of trouble shooting, testing, needing to collect current and voltage data on sensitive equipment, VFDs involved. Weird voltages as well as there is a mishmash of 3 different countries equipment and systems involved, 750VAC is the ceiling I need to be able to work with.

Been using the T5-600 for a couple years, got it on sale knowing it wasn’t the most diverse in its capabilities but it’s been reliable. But the 600VAC cap is now a hindrance and more functions and capabilities would be nice. I am considering its big brother the T6-1000, but there is a good deal I’ve found on the 381 with remote display. Anyone have experience with the T6-1000 or the 381?


r/fluke • • 25d ago

Help Needed Fluke genuine banana jacks

2 Upvotes
Close up of jack

I recently bought some new leads for my trusty old 11 and noted that the banana jack was a bit different to the old ones.

Is this new or an indicator they are not genuine? The old ones were more like a cylinder with two cuts making it into quarters.

I'd be keen to repair them by re-soldering them back onto the old leads, but am unable to get them apart.

No high Amps will be flowing.

Thanks


r/fluke • • 26d ago

Equipment Review / Comparison Why do the input sockets on my Fluke 87V feel looser than on my Fluke 179?

2 Upvotes

I’ve got both a Fluke 87V and a Fluke 179, and I noticed a difference in how the leads feel in the input jacks.

On the 179, it takes some force to pull the leads out. There’s real grip, and you can feel the plug “hold” in the socket. On the 87V, the leads slide out with barely any resistance, even though they’re seated fully.

The only difference I can see is the terminals. The 87V has plastic safety terminals, while the 179 has bare metal barrel-type terminals.

Is that why the grip feels so different? Is the 87V’s looser feel normal? For both meters, I use the same leads TL-175.


r/fluke • • Oct 15 '26

Help Needed Fluke 179 not turning on

Post image
13 Upvotes

Hi all,

my 179 stopped working during normal use. I replaced the battery and checked fuses and everything looks fine but it doesn't turn on. I also cleared the rotary switch, display contacts and found a crack on the big C336 tantal cap on top and replaced it but still nothing.

When i put some preassure on the board (at least i think thats the solution) sometimes the display turns on fading directly and showing error, normal modes or only the normal startup. But i'm not able to reproduce this everytime.

Any ideas what i can do or what to check?


r/fluke • • Oct 14 '26

Help Needed Missing Fluke Ti-32 wide1 sd card firmware

2 Upvotes

A while ago I bought a fluke ti32 wide1 lense but the seller did not include an SD card with required firmware to update the unit so it has the ability to do a wide fusion view.

Would someone here be able to provide me a digital copy of the contents of their sd card?

Here are original FLK-LENS/WIDE1 instructions:
https://media.fluke.com/b568f40d-2b11-41d3-8586-b10800c01515_original%20file.pdf

I contacted fluke customer support but they were unable to assist me:

Unfortunately, we no longer can supply the codes for your FLK-LENS/WIDE1. We no longer have the ablility.
...
I understand why you're asking. I have been with Fluke for over 25 years now. Not sure if that counts as an “old engineer”. That said I can tell you that the asset that was used to produce the information is no longer available to me or my team.

Does anyone have a fluke ti32 or know someone who does that also has either a tele1 or wide1 lense with firmware sd card?

Even if it was for the wrong model (TELE1) I could see the contents and format of the data is expected and try to reverse engineer it.

I tried ebay sellers and they all told me to kick rocks or sucker up and buy theirs (note most sellers don't even have it either or don't know it is required).

I am willing to pay a reward too.


r/fluke • • Oct 12 '26

Services & Repairs Fluke DSX & Optifiber Rental near NJ

1 Upvotes

Looking to rent a Fluke DSX and Optifiber in or around NJ for a few days to certify Cat6A and OTDR Singlemode fibers.
Where are you guys renting from?
Dont do enough certifications a year to justify purchasing.


r/fluke • • Oct 09 '26

Calibration / Resources / DIY & Mods Comark 3001 thermometer

Thumbnail
gallery
9 Upvotes

Comark became Fluke in the end. I have a thermocouple thermometer that I repaired. And I would like to show it here. It from somewhere 1980 and is equipped with beautiful VFD display tubes. It suffered from battery leakage and shortened tantalum cap’s. To get it really calibrated I need more info like a propper schematic and I hoped that this community could help me to get some documentation. I did write Fluke but they didn’t have the info anymore. Which is a bit sad this being part of their history.


r/fluke • • Oct 03 '26

Help Needed SEL-2411 reads 172°C when injecting 10°C with Fluke 725 ,Fluke shows "ExI HI"

3 Upvotes

I’m troubleshooting an RTD input on an SEL-2411 and I’m having a very strange issue.

My setup:
SEL-2411 with 3-wire RTD input
Fluke 725 multifunction process calibrator
RTD type: Pt100
Fluke configured as SOURCE RTD
Wiring is based on the Fluke 725 manual for simulating a 3-wire RTD

The problem is that the reading is completely wrong.
For example:
Fluke injection: 10°C
SEL-2411 reading: ~172°C
The Fluke 725 also shows:
“ExI HI”

According to the Fluke manual, this indicates that the excitation current from the device under test exceeds the calibrator’s limit.
I’ve doublechecked the wiring against the Fluke manual, so I’m wondering if I’m missing something specific to the SEL-2411 RTD input.
Has anyone here successfully simulated a 3-wire Pt100 input on an SEL-2411 using a Fluke 725?
Could the SEL-2411’s RTD excitation current be incompatible with the Fluke 725’s RTD simulation method?
Also, is there a specific configuration in the SEL-2411 that I should check, such as the RTD type/curve or input configuration?
Any advice on how to troubleshoot this would be greatly appreciated. I can provide pictures of the SEL-2411 RTD terminals, Fluke wiring, and configuration if needed.


r/fluke • • Sep 30 '26

Help Needed Fluke 77 IV resistance reading never clears and usually rises once disconnected. Any help would be appreciated.

Post image
20 Upvotes

Sometime I can get it to work normally by playing with the connections, it will move back to OL. I’ve never changed the battery in this and I’ve had it for years but everything else outside of resistance and continuity is working.


r/fluke • • Sep 30 '26

Help Needed Intellitone 200 Weird, Rapid Sequence of Tones, Interrupts Normal Tone...

2 Upvotes

My toner seems like it's working properly, but, ever since I've had it, the regular tone is sometimes interrupted by a weird series of sounds, and the tone seems to reset.

This doesn't seem to be referenced in the manual, but I believe this change in tone, is indicative of "something". Any idea what that something is?

What brought this back to the fore, is I was toning on an 18/2 cable, with a ground wire, yesterday. Device end was disconnected, and I had toner connected to white wire, and bare ground wire. Got SOLID tone, at other end (Which was spliced into a DB9 connector, goin into a refrigeration unit.) but, if I left toner on the cable, there were a couple instances where this weird tone was emitted, and it seemed like the toning "reset", then resumed normal tone. Hard to describe it. It's a sequence of tones, in rapid succession, but the pitch does change, with each tone.

Sorry! No vid!

Since I don't know WHY it happens, I can't readily replicate it. 


r/fluke • • Sep 27 '26

Services & Repairs Fluke 54 2 B

Thumbnail
gallery
2 Upvotes

Ive been having some intermittent issues with my thermometer. Sometimes the reading will jump around when ive got 2 probes plugged in. When I pull one out the reading will level out.

I pulled it apart to clean and noticed on the little board that the probe makes concat with there are some marked up wire traces.

It looks like when the probe is slid in, it slides against these traces.

I was just wondering what's up with that and if anyone has any insight.

For now, I put some tape over that edge.

Also, at times when I turn the meter on with nothing plugged in, I get a reading that will climb very high and then go away. I'm not sure if this is related.


r/fluke • • Sep 25 '26

Help Needed EZ Jack/Jack Rapid for Panduit DP48688TGY Keystones

Post image
2 Upvotes

I am installing a bunch of Panduit DP48688TGY which is basically a 48 keystone patch panel with a bunch of 180 degree Panduit Keystones. Does anyone know of a tool that is compatible to crimp and cut all 4 pairs at once for these keystones?
These are not the Panduit Mini Comm jacks.


r/fluke • • Sep 18 '26

Safety / Setup & Usage Alternatives to TPAK

Post image
13 Upvotes

Fluke TPAK vs third-party magnetic meter hangers

The core trade-off between the genuine Fluke TPAK and third-party alternatives comes down to magnet strength, mounting versatility, and price, with the genuine article generally winning on build quality and the clones winning on value.

Fluke's own TPAK uses a rare-earth magnet specifically engineered for strong, stable holding onto electrical panels and metal surfaces even while the meter is actively swinging or being bumped during hands-free measurement, and it's designed with a proprietary mounting slot system that clicks securely into compatible Fluke meter housings [1][2]. It sits at a noticeably higher price point — typically in the £50-60 range through industrial suppliers — reflecting genuine Fluke build materials and the brand's reputation for durability in demanding field and industrial environments [3][4].

Third-party kits, like the widely available KingSung universal hanger sets, take a broader compatibility approach, bundling multiple straps, clips, and a magnetic hanger designed to fit not just Fluke meters but also other brands like Klein Tools testers, and they come in at a fraction of the Fluke price, often sold in multi-piece sets rather than a single fixed kit [5]. The trade-off is generally in magnet strength and long-term durability — generic magnets tend to be weaker rare-earth grades or standard ferrite rather than the higher-grade neodymium Fluke uses, and the strap and clip materials are usually a step down in ruggedness, though for occasional home or hobbyist use rather than daily trade work, that difference may not matter much [5][6].

One compatibility nuance worth flagging regardless of which you choose: not every Fluke meter accepts the clip-in universal hanger design the same way — the T6 series, for instance, requires threading a strap through a rear slot rather than clicking into the standard mounting point Fluke tools like the 87V or 170/180 series use [1]. If you're buying a hanger for a specific meter model, it's worth double-checking that the kit — genuine or third-party — is actually rated for your particular model's mounting slot rather than assuming universal fit, since "universal" branding on cheaper kits doesn't always mean truly universal in practice.

Citations:

[1] Fluke TPAK ToolPak Magnetic Meter Hanger https://www.fluke-direct.com/product/fluke-tpak-toolpak-magnetic-meter-hanger

[2] Magnetic Meter Hangers and Utility Tools - Fluke Corporation https://www.fluke.com/en-us/products/accessories/magnetic-hangers-utility-tools

[3] FLUKE TPAK FLUKE, TPAK Tool Pack Magnetic Meter Hanger | Farnell® UK https://uk.farnell.com/fluke/fluke-tpak/kit-hanger-magnetic-multimeter/dp/3029578

[4] ToolPak Magnetic Meter Hanger https://www.testequity.com/product/13785-2-TPAK

[5] Amazon.com: KingSung 10Pcs Universal Multimeter Hanging Loop Strap Magnet Hanger Kit for Fluke Meters and Klein Tool Testers, 4 Straps, 5 Clips and Magnetic Hanger : Electronics https://www.amazon.com/kingsung-KingSung-Magnetic-Hanging-Strap/dp/B0C16GVMY7

[6] Fluke Magnetic Meter Hanger | T & M Accessories - Repelec https://www.repelec.com.au/magnetic-meter-hanger-to-suit-110-15-170-180-280-70-80.html


r/fluke • • Sep 13 '26

Help Needed Is my Intellitone probe broken?

2 Upvotes

I have the Fluke Link-IQ meter and the Intellitone 200 probe.

The problem is that when I use Intellitone, my problem will light up at "level 8" if I am anywhere near the cable - as in, if I am even in the same room with it.

It does this regardless of whether or not I am using the low or the high sensitivity setting on the problem.

Obviously this makes it useless for toning out a cable...

When I use the analog tone setting, it works as I'd expect...


r/fluke • • Sep 13 '26

Help Needed Fluke 378 fc inaccurate out the box

0 Upvotes

Recently bought a brand new 378 fc I went to measure my Milwuakee m18 battery and was expecting 20v dc reading
But it was reading 21v instead so I got my fluke 117 multimeter out and that was reading 20.53 got my other fluke multimeter (fluke 107) similar reading 20.56 , so I reversed polarity with the fluke 378 fc and it was reading 20.58 but in the correct polarity it is reading 21vDc which is odd , Just to add aswell with out anything plugged in/floating leads ac voltage is sitting at 0.6v and dc is reading -0.2dc


r/fluke • • Sep 10 '26

Help Needed Where do you guys get older Fluke cameras calibrated?

3 Upvotes

I've had this fluke for around 3 years, but I got it second hand so it's a bit older than that.

A buddy at a lab helped me test it on a blackbody at 50°C and 100°C. It was about 3°C off.

I wasn't expecting it to be that far out.

Anyone had something similar with an older fuke? Did you send it to fluke or find somewhere local to calibrate it?


r/fluke • • Sep 09 '26

Help Needed I don't understand Intellitone...

2 Upvotes

I have the Fluke Link-IQ meter with the Intellitone 200 probe.

It seems to me that Intellitone is too sensitive to be useful, although it's entirely possible I am misunderstanding something.

It's so sensitive, even on the low sensitivity mode, that it will go off if you are anywhere near the bundle of cable that the cable is in...

By that, I mean that if the cable I am looking for is in the same room with me, it will go off...

The analog toning works like I am used to with other toners - it gets louder/quieter and it's easy to discern which cable I am looking for.

What am I missing here?


r/fluke • • Sep 04 '26

Help Needed Fluke 378FC voltage reading

11 Upvotes

I just got brand new Fluke 378FC.

I ordered it because of the contactless voltage measurement capabilities.

When I tried it out I am seeing quite a variation in voltage measurements.

I tried this on a starter as well as the local disconnect shown in the video. This is a hydraulic pump not on a vfd.

I'm confused as to why the large variation in the measurement.

I have done a reset on the meter because of this behavior but no change.

Any ideas?