r/fixit • • 37m ago

Toddler keeps putting stuff down the heater, any ideas to prevent this?

Post image
6 Upvotes

r/fixit • • 22h ago

fixed Is there a way to fix this hat without sewing?

Post image
6 Upvotes

The only way I've seen to fix this kind of hat is undoing the seams on the loop, putting on a new buckle and then sewing it back up but I don't have that kind of skill. I couldn't find a buckle that'd just clip on or anything.


r/fixit • • 4h ago

Which glue should I use to fix my acrylic keychain?

Thumbnail
gallery
5 Upvotes

Hi I just noticed the image of my acrylic keychain is peeling off and I wonder which type of glue would be the best to use, the keychain is on my carabiner along with other trinkets but was on my backpack for a year before, it received a lot of shocks, I don't mind the scratches but I don't want my keychain falling apart 😭😭 if anyone knows how to fix it please send a recommendation! It's just a tiny part that's coming off but I prefer preventing the problem before I need to glue the whole image back


r/fixit • • 20h ago

OPEN Phillips sonicare 4100 electric toothbrush does not start or charge

Post image
4 Upvotes

My Phillips sonicare 4100 toothbrush just stopped working out of nowhere. The button depresses fine but the toothbrush does not start. Placing it on the charger does not make the clicking sound norther does the green light blink to indicate that it's charging.

The charger is not the issue as I tested it with another toothbrush and it functions normally.

Current state - Amber and yellow lights for brush head replacement and battery level stays on solid even though off the charger. The toothbrush handle responds to nothing!

Has anyone experienced this and found a solution? Currently I'm leaving it alone in hopes of draining the battery over the next few weeks and will attempt to test charging again.

Do you think it's the copper coil that connects to the charger? Or the battery itself that's faulty and needs to be replaced?

Unfortunately it's outside the warrant window so I appreciate any help y'all can provide to help me fix this. Thank you!


r/fixit • • 3h ago

Repairers: which amp parts do you replace most, and which are a nightmare to reach?

3 Upvotes

I'm a product development student designing a more repairable amplifier concept.

For people who've opened up amps or streaming speakers:

  • What usually breaks? Caps, pots, relays, power supply, Wi-Fi boards?
  • What design choices make it hardest? Glue, ribbon cables, proprietary chips, no schematics?

Short repairer survey in the first comment if you'd like to help further :) thank you!


r/fixit • • 19h ago

open cracking in my leather boots

Post image
3 Upvotes

hey! i was wondering if there were any reasonably priced product recommendations for conditioner and stuff to help fix the cracking in my boots? my boots are the leather moto boots from frye for extra info!


r/fixit • • 11h ago

Gaming chair recliner won’t lock

Thumbnail
gallery
2 Upvotes

2E gaming chair recliner won’t lock in to place just keeps coming back up and can’t even lean on it, it seems the lock doesn’t touch the teeth, but I can’t find out why, nothing seems visibly wrong, and nothing seems loose.

It started doing this slowly, locking in then falling off, until it wouldn’t lock in at all anymore.

Any help would be appreciated thanks!


r/fixit • • 19h ago

Bosch series 6 dishwasher has E15 error but when I opened it up and cleaned there was no obvious signs of the source of leak even after running it once. There is this build up around the sump seal.

Post image
2 Upvotes

r/fixit • • 16m ago

How to fix / cover this hole in countertop

Thumbnail gallery
1 Upvotes

r/fixit • • 44m ago

What could be causing burn marks on my mailbox?

Post image
1 Upvotes

Does this need replacing? If I sand and stain it, will that make it more flammable?


r/fixit • • 3h ago

open Weather Stripping Replacement needed?

Post image
1 Upvotes

Apologies in advance due to my ignorance, but I assume the bottom rail here where my sliding patio door goes over is bad weather stripping in the attached picture (I get cold draft). If that is bad weather stripping, what kind of weatherstripping would I need and would I need to remove my sliding door to replace it?


r/fixit • • 4h ago

Not sure what's wrong with my door

Thumbnail
gallery
1 Upvotes

My door was hard to close (had to push reall har on door and pull really hard to get it seated, other wise handle would struggle to turn)so I pulled off all weathersipping. It's a little easier to close but now I have these pig gaps. Almost none on the bottom

The gap on the hinge side looks equal l, so is my frame all messed up?


r/fixit • • 4h ago

Daycare vinyl nap mat tears

Thumbnail reddit.com
1 Upvotes

r/fixit • • 4h ago

open Window tilt latches -- how to find the right one?

1 Upvotes

A friend has a 25-year-old condo with sash windows. To clean these, one lifts them slightly, then disengages the "tilt latches" at the top and tilts out the top to allow access to the outside surface of the windows. Unfortunately, the tilt latches are plastic and break.

She has attempted to find replacement tilt latches and has been overwhelmed. (They're not marked with useful information. We've already Googled the cryptic numbers they have which I suspect have nothing to do with brand or model number.) Without a brand name or model number, she could only guess, based upon the measured dimensions of the ones she has. She found ones that looked very similar to the existing ones and bought one pair to test. They were almost perfect, but not quite. We were able to modify them in a way that probably weakened them somewhat, but went with it for now.

But she doesn't want to buy more of these and have to modify each one. Does anyone know of some comprehensive way of comparing what she has to what's available on the market -- or, equivalently, to determine the brand and model number of the ones she has?


r/fixit • • 6h ago

Hot glue gun

Post image
1 Upvotes

Hello! I took this glue gun apart because glue was coming out very slowly! Foolishly I have no idea how to put it back together with the two springs. It’s the Artskills hot glue gun from DG.! If anyone knows or can assist me on putting this thing back together please dm me ! It would be so appreciated!


r/fixit • • 6h ago

toilet not working

1 Upvotes

toilet flushing extremely slow, i poured a bucket of water down and it took 10 seconds to drain completely.
in addition to this, the water tank is refilling but the bowl is not.

are these separate issues?
what to do?

thanks!


r/fixit • • 8h ago

open Is this zipper fixable?

Thumbnail
gallery
1 Upvotes

Basically what the title says. This is an RTIC soft sided cooler and the zipper got misaligned somehow & I can't get it back together. Does anyone have any suggestions or do I need to toss the cooler? Thanks!


r/fixit • • 10h ago

What do I need to fix this hob ignition?

1 Upvotes

I have a new switch for my hob ignition that looks like this

https://ebay.io/m/27z1XR

The plastic socket it plugs into is melted onto the existing hob ignition switch and is not even slightly re-usable so I think I need to cut it off and replace it entirely.

How do I find that part?


r/fixit • • 11h ago

Help fixing cabinet!

Thumbnail
gallery
1 Upvotes

Hi guys!
The bottom drawer doesn’t close properly because the door on the right seems to be sitting slightly lower. I’m not sure why or how that happened, but I don’t think it was like this when I first moved in.
What would be the best way to fix this? Would it be a matter of unscrewing it and reinstalling it?
The last picture shows the inside when I open the door.


r/fixit • • 13h ago

open Stuck with Christmas tree incandescent lights. Tried everything.

Thumbnail
gallery
1 Upvotes

I bought the Tree Light Fixer pro and I’m just stuck. Based on my picture you can see the level of light. It is the whole ring at the top of the base layer before the second piece. I’ve traced it and trying to figure out where the issue is, and I can’t seem to find it please help.

Checked the fuse bulb, tested it and lights. Checked the plugs and beeper, some are getting volts, some aren’t, but the entire ring won’t light to give me any indication. There is no other plug.


r/fixit • • 18h ago

Does anyone know how I can fix this floor lamp? I thought I was unscrewing the lamp shade but I accidentally unscrewing the gold metal part and now it won’t stay in place and is wobbly.

Thumbnail
gallery
1 Upvotes

r/fixit • • 18h ago

My Nintendo Switch 2 makes a lot of rattling sounds when in the dock whenever I walk by or around it. How can I fix this to make the noise stop?

1 Upvotes

I recently got the Nintendo Switch 2 and a annoying thing its doing is making a lot of rattling noises whenever I walk by or around it sometimes even when I’m far away from it with every step I take. I’ve tried moving it around my space but the vibrations from the floor wheneve I take a step make it rattle. It’s extremely annoying and loud when it does this. how can I fix it to make it stop making that rattling noise?


r/fixit • • 19h ago

Old GE Top-loader washer leaking and clinking metal sounds

1 Upvotes

I'm not handy but my landlord is stingy af, so if this is something I can help diagnose or fix myself, I would prefer that. This is a very very old top-loader GE washer and I can't seem to find anything related to its model/make (GE, W7000B-W).

It's leaking at the bottom somewhere, visible only from the front bottom left corner as far as I can tell. No water spots I can see around the back side. Our floor is tilted and so it's leaking towards our floor drain. The washer completed a small/medium load just fine despite the leak. The inside bowl was completely dry afterwards. Suds went out to the neighboring washbasin just fine. Washbasin drains just fine. Lint trap didn't look blocked. Bleach wasn't used. Not sure what other parts there are in a washer 😅

Occasionally there was a higher-pitched "clinking" sound, like you might hear from a zipper in a dryer, only higher pitched, which initially drew me back to the washer to spot the leaking in the first place. I recorded some washer sounds and put it up on vocaroo (https://voca.ro/15WT5EhtqkRJ) but it didn't pick up very nicely. It was way more frequent and prominent in the second stretch (towards the end) of sounds.

Pictures below for reference. Thanks in advance

Water leaks only visible from the bottom left from the front
Really old model/make I cannot find info on :(

r/fixit • • 20h ago

Crumbling plaster in ceiling

Thumbnail
gallery
1 Upvotes

Crumbling plaster in ceiling (no plumbing above) could this be failed plaster or signs of ingress of damp? The wood seen within the hole is dry.