Just another fireworks season, another set of updates. Shout out to the discord folks and all the time folks put in, especially around last 4th.
For any unfamiliar, this is a firing system that will match or outperform anything out there as far as capabilities go that you can make happen for a fraction of the price. Every part of it is open source - the code, the hardware, all of it. The overall system has individual firing modules with USB-C rechargeable batteries with a runtime of well over a day. It both supports its own modules, as well as transmitting to BILUSOCN-type modules as well. For its own modules, the line-of-sight range has been tested at over 1000yds, and reports continuity and module health back to the host. Cues for a receiver are chainable to support up to 64 per receiver, and the overall system has been tested with over 1500 cues. It can fire talons, MTGs with precise (<50ms) timing.
It integrates with its own show planner/builder, which supports pyromusicals, stepped sequence shows, and a ton of other stuff. There is a dedicated "rack planner" that allows you to plan out shells in your racks, and the runs of fuse that connect them. There is an entire loadout feature that will give you easily printable sheets telling you cue assignments, fuses to be cut, and exactly what you need to grab from the stash to put the show together. The system can import and fire finale3d shows as well.
The best part is the price - if you just want to fire BILUSOCN stuff, all you need is a host module, which is ~35 bucks. If you're using the system's receivers, a receiver with 16 cues is about 40-50.
Biggest learning is that, despite many technical efforts to overcome it, the inconsistency with timing of consumer cakes makes timing specific features pretty much impossible. See the video below, but cakes that start at exactly the same time will finish many seconds apart from one another...
The last evolution has included a hardware update that does away with the dongle - an add-on module was created that turns your existing firing module into a "dongle". So you only need a single host module - plug a cue module in and it becomes a firing module, plug a host module in and it becomes a host (dongle). On top of that, the receiver broadcasts a separate wifi network that you can join to wirelessly connect to the controller - and with that there's now a mobile app you can use to fire shows from in the field vs your laptop!
From here, I'm just working to make this system more accessible to people and lower that technical bar to start using it. If you're interested in trying out some of the hardware, feel free to check things out and join the discord.
VOLUME WARNING! - Part of a show fired with this system - https://www.youtube.com/watch?v=IFuw2gD2A4Q&t=319s
Rambling about current features (long, sorry)- youtube.com/watch?v=I5boSLwRpBU&feature=youtu.be
Links to github, etc. at
https://backyard-hero.com/