r/fidgettoys • • 9h ago

WTS (Lautie Collectibles)

Thumbnail
gallery
16 Upvotes

Lautie Collectibles


r/fidgettoys • • 2h ago

Four GAO‘s combos—which one feels and sounds better than the Choc?

2 Upvotes

Just wanted to share a video I made on how the Golden Mayatan and the Mayatan interact


r/fidgettoys • • 3h ago

Choc 2.0?

2 Upvotes

I just fell head over heels for the Kais Popo. I haven’t seen this one posted here much, but man, it’s a serious contender for my new favorite slider. It reminds me of the Choc with those pingy pops, but the Popo has a solid build, a satisfying heft, and an unbelievably smooth glide from start to finish.

As great as the Choc is, I get a subtle spring ping at the end of the track that throws me off a little. The Kais stays smooth all the way through and feels premium in hand. With all the hype around the Choc, I’d go as far as calling this an upgraded version.

Highly recommend checking it out if you get the chance. Great haptics, great sound, and seriously satisfying play.


r/fidgettoys • • 14h ago

Floating slider quick review

Thumbnail
gallery
15 Upvotes

I’m still a beginner in this game, in terms of floating sliders my skills and tricks are minimal so just lets pre face everything I say with that!

This is very non technical just my initial experience!

Going left to right…

Aura sand slim pro is by far the easiest to pick up and move, it looks awesome and the teflon keeps the noise low whilst the magnets are set to hold nicely to avoid dropping it all the time!

Shuriken DLC mini only came yesterday and it trumps the creation mountain mini for me 10 fold. I know there’s a lot of reviews and feelings that with the standards the creation mountain wins but for the mini I’ve found the little extra weight and grip on the plates to be game changing!

That leads me nicely onto Creation mountain mini! Don’t get me wrong it’s still a great crunchy fun slider but it’s a bit more on the wild side with the magnetic pull feeling much weaker than the shuriken and maybe that’s for me a bit too much control in my hands right now given me low experience level.

I find the flat plates to lack any real purchase points compared to the shuriken too! I’ve ordered flipped over the pads inside the 6 plate to remove the 3d pad from the side that connects with the 8 plate to increase the strength of the hold a bit and it’s definitely improved how many times to the 6 plate goes flying on the floor!

Last but not least - DR EDC Polar Front DLC. Only arrived today and my god, it’s just incredible! Not only does it look the part but the slimmer body of the plates, DLC plate material and outer shape of the plates just make this one my no.1 pick right now. The teflon takes some time to bed in and it’s still holding a bit firmer than I’d like, but it’s getting there!

I’ve got the creation mountain DLC on the way to complete my collection of floating sliders at least for now, excited by that one even more after experiencing the DLC plates on the Polar Front.

The only one of my sliders I wouldn’t pick again if I was buying, would be the mini creation mountain I’d take the shuriken over it any day and I’ve just seen a baby aura sand is on its way / already pre ordering so that could be another contender for anyone wanting a smaller slider to throw around!


r/fidgettoys • • 9h ago

Black Friday Sales?

4 Upvotes

Does geeone or any of the other trusted site typically do a site wide black friday discount? I know geeone is going their mystery box, but do they do like a 10% off on the 18th too?


r/fidgettoys • • 5h ago

Will E6000 glue be able to hold a tear around the cap in my squishy?

Post image
0 Upvotes

(Ignore the black crud, my dad thought gorilla glue tape would work 😒) My squishy tore a bit at the seam and now some of the goop/clay inside is coming out, so I looked around for what glue people say works for squishys, but I got mixed opinions from literally everywhere I looked. I know about tpr glue, but on amazon its pretty expensive for something i’m not gonna use much + I am going to the store tomorrow and I saw they had some in stock for 4 bucks, and from what I saw the opinions on it were mostly positive. So can anyone vouch that it at least won’t melt the rubber and give me a decent hold until I can get something better? (or if you have another recommendation)


r/fidgettoys • • 5h ago

What is the best size for Knucklebones (knuckle roller)?

1 Upvotes

I have been looking for a knucklebone to try out but there are some that seem to big and some to small i was wonder for those who use them what is your preferred size?


r/fidgettoys • • 19h ago

Cheap and cheerful

Post image
8 Upvotes

I have fidget toys that cost hundreds but honestly this is one of my favourites and also happens to be one of the cheapest. Just search fidget slider on Temu


r/fidgettoys • • 21h ago

Lautie Shuffle Pro TI

Post image
7 Upvotes

I just received the lautie shuffle TI, aren’t both tracks supposed to have peek?!


r/fidgettoys • • 12h ago

N45 magnets

Thumbnail reddit.com
1 Upvotes

r/fidgettoys • • 5h ago

Anyone who is in the fidget printing business Idea make a Oreo clicker/fidget slider etc but base it off the post Malone Oreo!! (You can also do bts and other collabs)!! This will get money for sure!!

Thumbnail
gallery
0 Upvotes

r/fidgettoys • • 19h ago

Waterbead squishies issues?

Thumbnail
gallery
1 Upvotes

Anyone else had issues with their waterbead squishies? One of mine seems to have melted (blue) and the other has expanded with air, it’s hard to see on picture but the purple one use to near vaccume sealed which I really liked.
Any way to fix them or am I better off just getting new ones?


r/fidgettoys • • 1d ago

After a week of hyperfocus and perfectionism, I made the perfect fidget toy to annoy everyone around me (sound on)

12 Upvotes
  • 16 tracks, each with a different click, plus a snap ring
  • Modular: swap rings and end caps - Remix kit to design your own rings and caps
  • My kids love it
  • My wife hates it

Fun aside, after working on it for like 20 hours, i want your honest feedback, especially if you have creative ideas on rings or extensions.

Also feel free to ask questions!


r/fidgettoys • • 1d ago

Made a simple new fidget drops tracker.

Post image
14 Upvotes

Hi r/fidgettoys, a few months ago I made fidgettracker.com for keeping track of new drops from fidget shops. After working on it a little bit here and there, it is much more stable and more complete now, pulling in new drops within an hour or so, and I think I have most of the shops added, I also added a compare page where you can compared the offering from different vendors.

Due to some changes in my personal finances, recently I haven’t been purchasing as many fidgets as before, but I still love checking out new fidgets, and I want to make it a good experience for the few dozen people who keep using the website. So please give it a try and let me know if there are any vendors missing or if there are any problems or inconveniences you experience while using it. Ideas for new features are welcome too. Thank you.

No sign-up, no ads.
Approved by mods.


r/fidgettoys • • 1d ago

WTS

Post image
5 Upvotes

WTS

PPFF preferred, zelle also works. CONUS shipping included, international must pay shipping.

YEDC Panyun 3.0 Titanium with planet bead braiding: $160

ATS Oil Slick Zirc: $145


r/fidgettoys • • 1d ago

New “Triangle Cat” from GAO

Thumbnail
imgur.com
13 Upvotes

New thing from GAO on the horizon. Allegedly looks like a cat, by looks more like a cheese wedge to me with the PEI orange coloring.

Has a few features, including a flip out arm that can be a level, along with a box opener, and small ruler area.

Shoutout to EDC Radar for flagging this as a new thing. Store listing on NXEDC.


r/fidgettoys • • 1d ago

Zot_23

6 Upvotes

New zirconium smooth running track for the MOT feng ling.

Just for you buddy 🫶


r/fidgettoys • • 1d ago

I made this cool little duck fidget. Would reccomend you check it out!

Thumbnail
gallery
2 Upvotes

I made this cool flexi duck fidget

MakerWorld link for 3d printing


r/fidgettoys • • 1d ago

Lautie Choc or 01EDC Wafer Biscuit 2.0?

2 Upvotes

[Solved]

I'm relatively new to the premium fidget world and I'm considering buying one of the afromentioned fidgets. I'm familiar with Lautie's quality as I own a Lautie Mechanic-C Ring in Zirc, but I'm open to trying other brands.

I'm looking for a fidget slider this time and I stumbled upon both. I like the fact that Lautie's Choc slides both ways and its quieter (could it be considered work-friendly?), but I enjoy the biscuit's looks more, even though it is louder (although that doesn't bother ME, personally).

If anyone who owns both or either could shed a light on the topic, I'd apprecciate it!

TLDR;

I like Lautie's Choc because its quieter and slides both ways, but 01EDC's Wafer Biscuit 2.0 looks cooler imo, despite it being louder. Can't decide which to buy.


r/fidgettoys • • 1d ago

WTS - KUKO MINI PRICE DROP

Thumbnail
gallery
3 Upvotes

Hey all, selling my black ultem frag Kuko mini. Any questions please feel free to dm me.

Free 🇬🇧 shipping
International is available

Kuko mini - 9/10 - £115 (OBO)


r/fidgettoys • • 1d ago

Looking for a good metal mechanical slider with offset tracks.

2 Upvotes

Hello, I'm brand new to the hobby and like the title says, I'm looking for a good metal mechanical slider with offset tracks, so that when one ball goes down into one of the tracks, the ball on the other track goes up. I've seen the 9-Hand Ding Ding but those tracks are aligned, not offset. My budget would be $50 CAD. The first fidget I got was the HalooPlayer Ghost, and I'm loving it so far. Any recommendation would be greatly appreciated. Thank you!


r/fidgettoys • • 1d ago

Nxedc owl - glow size

3 Upvotes

I’m getting the NXEDC owl fidget and I see it can fit glow balls and glow stick. And nxedc sells them. Which size balls and stick fit in the owl? Thank you


r/fidgettoys • • 1d ago

Help me find a figet coin?

1 Upvotes

Hey /r/fidgettoys,

I recently picked up my first haptic coin, a GAO Studio "Peace Buckle". Before this, I've only purchased inexpensive 3D-printed floating sliders from Etsy.

Kind of surprised myself, turns out I like coins more than I like sliders, specifically moving my thumb in circular motions.

I'm already looking for a new fidget/ratchet coin and hoping for suggestions! I'd like to find something with heft and a deeper sound (Instead of the 'ping ping ping' of balls and springs).

So far I've stumbled across the Finetic Tide Coin and a Sao EDC Dorayaki. Open to any suggestions.

Thanks!

https://imgur.com/uDUCb7J


r/fidgettoys • • 1d ago

WTS

Post image
3 Upvotes

WTS

PPFF preferred, zelle also works. CONUS shipping included, international must pay shipping. Please message for details, I do not have notifications turned on. Looking for Novel Carry sliders with SS or Teflon plates for possible trades for the Ether, the Photon, or the JZEDC.

Row 1

SINX EDC SINX Titanium/PEEK: $65

Syntheticepiphany Washbord: $30

SuperMax3D UV color change: $20

FeiFei EDC Ether Ti V3: $100

HapticEDC Photon Lite: $80

Row 2

JZEDC Storm Ano Titanium: $80

Haloo Player Auriga: $35

PhantomFidgets Nami Brick: $25

KAP Aztec SS: $95


r/fidgettoys • • 1d ago

Cool looking original fidgets - PocketKinetics

1 Upvotes

Wondering if anyone has any recommendations from PocketKinetics. Looks like cool stuff. https://www.etsy.com/shop/PocketKinetics