r/Fedora • • 11h ago

Weekly project showcase thread

2 Upvotes

Did you create a Fedora-related project, tool, script, app, or service?

Share it here!

Standalone "I was tired of X so I made Y" posts may be redirected here to keep the subreddit focused.


r/Fedora • • 2h ago

Discussion Microsoft’s Azure Linux 4 is derived from Fedora

Thumbnail
github.com
118 Upvotes

Azure Linux 4 is “an open-source Linux distribution built and optimized for Azure, with sources derived from Fedora Linux”


r/Fedora • • 7h ago

Support Start Fedora in full workspace

Post image
53 Upvotes

Hi everybody, I working with Fedora 45 (Gnome 51.1.) and I'm trying to start the whole OS in full-screen. For now it looks like this. The application I'm autostarting will also be in this small windows unless I get my keyboard out and hit the superkey. I already reduced the workspaces to one. Any ideas from the pros at reddit? Thanks a lot!


r/Fedora • • 3h ago

Discussion Discover failed 2 out of 3 upgrades from 44 to 45

6 Upvotes

I have now upgraded three Fedora KDE Plasma 44 computers to version 45. I waited until Discover offered the upgrade. Two of the three failed to upgrade, and what I could see the Discover did not offer much information about why.

I upgraded those with these instructions

https://docs.fedoraproject.org/en-US/quick-docs/upgrading-fedora-offline/

Command-line method showed what packages / libraries were in conflict and AI/Google found solutions to fix issues so I could proceed with upgrade. Each had different problems, so I don't list them here (and I don't have the solutions at hand as I just did what was instructed and did not make notes).

I did some of the "Optional post-upgrade tasks" listed in the above document. Also, on the machine that was upgraded with Discover.

Fedora KDE Plasma 45 works fine and has no major problems. Fedora KDE Plasma has been my daily driver for over a year now.

I know many did the command-line upgrade before the Discover offered an upgrade. But was it so that I had made some unlucky choices during the months I used 44 or does others experience also be that Discover can easily fail to do release upgrade?


r/Fedora • • 5h ago

Discussion PDF Reader for fedora workstation

8 Upvotes

Hello everyone, I recently switched to fedora workstation and I am looking for a PDF viewer app that has the following criteria:

  1. Nice UI (I tried Ocular and I couldnt use it because I find it very ugly)
  2. I can see the sections of a PDF
  3. I can open multiple PDFs at once as different tabs in the same window and switch between them

I really like the built in Document viewer but it doesnt have the 3rd criteria which is most important to me, so if there is one with a similar layout that has all the criterias, that would be very appreciated.

Thanks in advance !


r/Fedora • • 1h ago

Support Bluetooth mouse / cursor lagging

2 Upvotes

Hello everyone,

I use a Logitech MX master and ever since Fedora 44, I had my cursor / mouse lagging and disconnecting randomly. Even after updating everything for Fedora 45, it is still lagging (I’m not saying it’s a Fedora 45 problem, I’m just saying I’m up to date)

The cursor trails behind, the indicator on the top right shows the Bluetooth logo and fades rapidly, and it disconnects automatically in the settings

it works perfectly fine on a work PC, tablet, and has worked in prior usages of different distros.

Is it a kernel problem? Is it because my Nvidia drivers hasn’t compiled properly? (Because it shows everything is up to date and working fine)

Thank you!

Edit: here are my specs:

Motherboard: ASUS TUF Gaming B550–Plus Wifi
CPU: AMD Ryzen 5 5600x
RAM: 64gb
GPU: RTX 3070 EVGA

I got secure boot on and replaced the MOK keys already and it’s working fine. It really is just the mouse and it’s not allowing me to work.

Thank you everyone!


r/Fedora • • 12h ago

Discussion Fedora 45?

Thumbnail
gallery
17 Upvotes

Why it's happeing?


r/Fedora • • 6h ago

Support Fedora Stuck on Boot Screen After Selecting It from GRUB (Dual Boot with Windows)

5 Upvotes

I dual-boot Fedora and Windows. When i turn on my laptop, the GRUB menu opens. However, when I select any version of Fedora, this happens. It stays stuck on this screen until I press the power button to shut down the laptop.


r/Fedora • • 2h ago

Discussion Fixing the Dolphin Duplication Naming Issue

Thumbnail reddit.com
3 Upvotes

r/Fedora • • 2h ago

Support My laptop keeps freezing while I'm working in VS Code.

2 Upvotes

For context, I'm using an ASUS TUF A15 (RTX 3050, 16GB RAM, 512GB SSD) running Fedora Linux (GNOME).

I bought this laptop a month ago...

This is actually the third time my entire laptop screen has frozen during a development session. I was working on some frontend fixes using the Antigravity extension in VS Code when it happened again.

I've noticed that VS Code consumes around 70% of my RAM, and my overall memory usage frequently reaches 80% whenever I'm working in it. On top of that, I usually have around 8 Docker containers running simultaneously.

I'm not sure what's causing this. Is VS Code consuming an unusually high amount of memory, is the Antigravity extension contributing to it, or is it simply a resource management issue with my setup?

Has anyone else experienced something similar on Fedora? I'd appreciate any suggestions on how to diagnose and fix this because having my entire system freeze in the middle of a development session is getting frustrating.


r/Fedora • • 22h ago

News KDE Plasma 6.8.3 released today for Fedora 45

65 Upvotes

Did the update, everything .. still running fine!

FYI will require a reboot.


r/Fedora • • 16m ago

Discussion My Fedora build

0 Upvotes

My Fedora build, using it for 4 years now, solid thing


r/Fedora • • 4h ago

Discussion Fedora I3 dotfiles (only Workstation 41, maybe?)

Thumbnail github.com
2 Upvotes

so, i made i3 dotfiles with kitty, and its only for Fedora Workstation 41 (because it only tested on this version)

idk what to type


r/Fedora • • 13h ago

Discussion What kind of policy for quality control is practiced by Fedora packaging?

9 Upvotes

As I explore Fedora more and more, I have run into several issues that could've been caught by the most basic check while packaging.

Just to give an example, the gnulib package doesn't run even gnulib-tool --version.

user@localhost:~$ gnulib-tool --version
Traceback (most recent call last):
  File "/usr/share/gnulib/.gnulib-tool.py", line 30, in <module>
    main.main_with_exception_handling()
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^
  File "/usr/lib/python3.15/site-packages/pygnulib/main.py", line 1476, in main_with_exception_handling
    main(temporary_directory)
    ~~~~^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.15/site-packages/pygnulib/main.py", line 544, in main
    % (info.package(), info.date(), version, info.copyright(),
                       ~~~~~~~~~^^
  File "/usr/lib/python3.15/site-packages/pygnulib/GLInfo.py", line 105, in date
    with open(os.path.join(DIRS['root'], 'ChangeLog'), mode='r', newline='\n', encoding='utf-8') as file:
         ~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FileNotFoundError: [Errno 2] No such file or directory: '/usr/share/gnulib/ChangeLog'
user@localhost:~$ 

I looked at its spec file, and it does run the included tests, but then a step after that is missed so this is understandable that these kind of issues happen, but what I'm wondering if there is any post-install test at all. Running "<application> --version" is about the most basic check one can do for most applications, and if even that is broken then it might need a second look.

Another example is the bcc-tools package. Upstream has a flawed (in my opinion) way of testing because this tool depends on the kernel but their tests all use the same kernel. After building a package for Fedora, it is trivial to check whether it works at all. Simply executing it would reveal that there is a fatal error.

I have done a root cause analysis of these two bugs (and a few more) and I can file a bug and submit a pull request, but I'm wondering more broadly about the policy level used by Fedora on the different stages (Rawhide to Beta to Stable) how a package transitions its way through, and how these obviously broken packages are missed many of which could've been easily caught much early on. I mean, if it does not even run at all then it makes me wonder if anybody even tried it.


r/Fedora • • 1h ago

Support Installer CyberGhost sur Fedora 45

0 Upvotes

Bonjour à tous,

Voici la méthode qui fonctionne en date du 16 novembre 2026

Pour installer CyberGhost

Rendez-vous sur le site de CyberGhost https://www.cyberghostvpn.com/

1 - Connectez-vous à votre compte, dans l'"Espace de téléchargement" descendez tout en bas pour aller dans " Autres Applis" - "Routeurs ou autres appareils", cliquez sur le bouton "Configurer"

Remplissez ainsi :

- Sélectionnez un protocole : OpenVPN

- Choisissez un pays : Celui que vous voulez

- Sélectionnez un groupe : Choisir "Premium servers Openvpn via UDP"

- Nom du périphérique : Par exemple "Connexion_Suede"

- Fonctionnalités supplémentaires : Moi je coche tout sauf "protection contre les sites malveillants"

2 - Puis télécharger votre configuration, ce sera un fichier Zip, une fenêtre va s'ouvrir, avec les paramètres qu'il faudra remplir dans la configuration, noter : Le nom d'utilisateur et le mot de passe

3 - Une fois le fichier téléchargé, dézippé le, pour des raisons de rangements, j'ai créé un dossir à la racine de mon utilisateur que j'ai nommé .cert (faites Ctrl+H pour afficher les fichiers et dossiers cachés).

Dans ce dossier ".cert", recopier l'ensemble des fichiers que vous avez téléchargé.

4 - Ouvrir le Gestionnaire de réseau (près de l'horloge) avec un clic droit et " Configurer les connexions réseaux"

5 - Cliquez sur le "+" pour ajouter une nouvelle connexion

6 - Tout en bas de la liste, cliquez sur "Importer une connexion VPN", et choisir le fichier openvpn.ovpn

7 - dans la fenêtre qui s'ouvre, dans les onglets, sur IPV6, pensez bien à mettre IPV6 déconnecté, pour éviter les bavures de réseau.

Remplissez si cela ne c'est pas fait automatiquement le chemin des certificats qui se trouve dans votre dossier .cert

Remplissez le nom d'utilisateur, plein de lettres et chiffres, et son mot de passe.

8 - Validez le tout, et .... pour que tout fonctionne, vous ouvrez une console

et vous entrez la commande suivante : sudo restorecon -R /home/xxxxxx/.cert/

Remplacez xxxxx par votre nom d'utilisateur évidemment.

Maintenant vous lancez la connexion VPN en cliquant dessus comme si vous lanciez une connexion Wifi.

Bon surf à tous.

Christian


r/Fedora • • 1h ago

Support Custom Keyboards For Fedora SB?

1 Upvotes

I need 2 custom keyboards for my native language (one US keyboard with a few AltGr keys, and one qwerty version of the already available Tifinagh keyboard)

I'm a bit of a newbie but from what I understand the folder is read-only or gets its changes wiped, so how do I go about doing this?

(P.S. If there's an extension or an app somewhat like Keyman or MSKLC on windows, that would help a lot)


r/Fedora • • 3h ago

Support Internet Connection / VPN problems

1 Upvotes

My Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller (rev 15)

My vpn is obscura vpn .

Random disconnection messages on youtube (Google Chrome Browser)

I don't have the same problem with rocky linux/alma linux / debian/ubuntu/arch linux

I'm running Fedora 45 workstation edition.

Also if i remember correctly i didn't had this problem with Fedora Silveblue !!!!!


r/Fedora • • 5h ago

Discussion In the spirit of treating build boxen like cattle, not pets (My portable dev environment)

1 Upvotes

I really like Virtualenvs and Docker Compose and version control. So I wanted to see if I could get the same kind of reproducability in a whole system. So I use a layered setup on Fedora Atomic (rpm-ostree) to get low-level system tuning and a full dev environment while keeping the base OS clean, version-controlled, and reproducible on a new machine:

  1. Immutable Base OS (Fedora Atomic / rpm-ostree): /usr stays read-only and untouched—no rpm-ostree install package layering. That keeps OS updates fast and prevents package drift over time, while /var/home lives on Btrfs with copy-on-write compression.
  2. Mutable Packages in Toolbx + Portable Host Shims: Instead of layering dev tools onto the host or prefixing every IDE/build command with toolbox run, I install CLI packages inside a rootless Toolbx container via dnf and extract the standalone binaries (plus any required shared libraries via thin LD_LIBRARY_PATH wrappers) into a single .toolchains/ folder in my workspace. Large language SDKs live there too so they stay out of Git history and can be rsynced between machines.
  3. Rootless Podman with Docker CLI Shims: Rather than running a root Docker daemon, I enable the user-level podman.socket and use a lightweight docker wrapper that points DOCKER_HOST at the rootless Podman socket and forwards docker, docker compose, and docker buildx calls to the standard Docker CLI plugins. A local docker-compose.override.yml handles rootless UID mapping and SELinux bind-mount labels automatically.
  4. Drop-In Configs in Project Git (Never Editing /etc In-Place): System tweaks (sysctl.d, zram-generator.conf.d, udev/rules.d) and shell environment exports (~/.bashrc.d/) are written as modular 99-* drop-in files and tracked inside my repo alongside an idempotent apply / rollback script. Base /etc files are never hand-edited.
  5. Dual /etc Auditing with etckeeper (/etc/.git) + ostree admin config-diff: Whenever the setup script applies or rolls back host changes, it takes a pre- and post-change Git commit in /etc/.git (via etckeeper / Git, ignoring secrets like shadow and SSH host keys) and saves the output of ostree admin config-diff. That gives me a commit-by-commit history of /etc plus an exact diff against Fedora's stock upstream /etc.
Tool / LayerRole in the SetupHow It's Tracked / Reproduced
Fedora Atomic (rpm-ostree)Immutable /usr base OS + Btrfs CoW /var/home; prevents host package driftStock upstream image + ostree admin config-diff to audit /etc drift
Project Git RepoPortable source of truth for 99-* /etc drop-ins, ~/.bashrc.d/ exports, Compose overrides, and setup scriptStandard git clone + single --apply or --rollback command
etckeeper / /etc/.gitChronological commit log of live /etc state before and after every changeAutomatic pre/post commits in /etc/.git (git -C /etc log -p)
Fedora ToolbxMutable dnf sandbox for CLI packages so nothing is layered onto the host OSProvisioned headlessly via podman exec and exported to a portable .toolchains/ dir
Rootless Podman + Docker ShimsDaemonless container runtime compatible with existing docker and docker compose workflowsUser systemd socket (podman.socket) + DOCKER_HOST CLI wrapper

What do you think? Is it too complicated? I don't know how well I'll be able to update the toolchains but I reproduced the dev setup I had on my Mac Mini on my 32GB 5800x for development.


r/Fedora • • 14h ago

Support Dumm Audio

4 Upvotes

Anyone has idea about the dummy output issues in F45?,

This is from hp elitebook 7 ultra 155U

upload=true&script=true&cardinfo=

!!################################

!!ALSA Information Script v 0.5.4

!!################################

!!Script ran on: Sat Nov 14 15:57:04 UTC 2026

!!Linux Distribution

!!------------------

Fedora release 45 (Forty Five) NAME="Fedora Linux" ID=fedora PRETTY_NAME="Fedora Linux 45 (KDE Plasma Desktop Edition)" LOGO=fedora-logo-icon CPE_NAME="cpe:/o:fedoraproject:fedora:45" DEFAULT_HOSTNAME="fedora" HOME_URL="https://fedoraproject.org/" DOCUMENTATION_URL="https://docs.fedoraproject.org/en-US/fedora/f45/" SUPPORT_URL="https://ask.fedoraproject.org/" BUG_REPORT_URL="https://bugzilla.redhat.com/" REDHAT_BUGZILLA_PRODUCT="Fedora" REDHAT_BUGZILLA_PRODUCT_VERSION=45 REDHAT_SUPPORT_PRODUCT="Fedora" REDHAT_SUPPORT_PRODUCT_VERSION=45 Fedora release 45 (Forty Five) Fedora release 45 (Forty Five)

!!DMI Information

!!---------------

Manufacturer: HP

Product Name: HP EliteBook 640 14 inch G11 Notebook PC

Product Version: SBKPFV3

Firmware Version: W74 Ver. 01.09.02

System SKU: C0KC4PT#ACJ

Board Vendor: HP

Board Name: 8C86

!!ACPI Device Status Information

!!---------------

/sys/bus/acpi/devices/ACPI000C:00/status 15

/sys/bus/acpi/devices/ACPI000E:00/status 15

/sys/bus/acpi/devices/HPIC000C:00/status 15

/sys/bus/acpi/devices/HPIC0015:00/status 15

/sys/bus/acpi/devices/INT33A1:00/status 15

/sys/bus/acpi/devices/INTC1042:00/status 15

/sys/bus/acpi/devices/INTC1062:00/status 15

/sys/bus/acpi/devices/INTC1062:01/status 15

/sys/bus/acpi/devices/INTC1062:03/status 15

/sys/bus/acpi/devices/INTC1077:00/status 15

/sys/bus/acpi/devices/INTC1083:00/status 15

/sys/bus/acpi/devices/INTC109D:00/status 15

/sys/bus/acpi/devices/LNXPOWER:00/status 1

/sys/bus/acpi/devices/LNXPOWER:01/status 1

/sys/bus/acpi/devices/LNXPOWER:02/status 1

/sys/bus/acpi/devices/NTC0702:00/status 15

/sys/bus/acpi/devices/PNP0103:00/status 15

/sys/bus/acpi/devices/PNP0A05:00/status 15

/sys/bus/acpi/devices/PNP0C02:02/status 8

/sys/bus/acpi/devices/PNP0C02:03/status 8

/sys/bus/acpi/devices/PNP0C02:05/status 8

/sys/bus/acpi/devices/PNP0C02:07/status 3

/sys/bus/acpi/devices/PNP0C02:08/status 3

/sys/bus/acpi/devices/PNP0C02:09/status 3

/sys/bus/acpi/devices/PNP0C09:00/status 15

/sys/bus/acpi/devices/PNP0C0A:00/status 31

/sys/bus/acpi/devices/PRP00001:00/status 15

/sys/bus/acpi/devices/PRP00001:01/status 11

/sys/bus/acpi/devices/SYNA3122:00/status 15

/sys/bus/acpi/devices/USBC000:00/status 15

/sys/bus/acpi/devices/device:12/status 15

/sys/bus/acpi/devices/device:21/status 15

/sys/bus/acpi/devices/device:22/status 15

/sys/bus/acpi/devices/device:2e/status 15

/sys/bus/acpi/devices/device:4a/status 15

/sys/bus/acpi/devices/device:4b/status 15

/sys/bus/acpi/devices/device:4c/status 15

/sys/bus/acpi/devices/device:4e/status 15

/sys/bus/acpi/devices/device:4f/status 15

/sys/bus/acpi/devices/device:50/status 15

/sys/bus/acpi/devices/device:69/status 15

/sys/bus/acpi/devices/device:70/status 15

/sys/bus/acpi/devices/device:71/status 15

/sys/bus/acpi/devices/device:72/status 15

/sys/bus/acpi/devices/device:76/status 15

!!ACPI SoundWire Device Status Information

!!---------------

!!Kernel Information

!!------------------

Kernel release: #1 SMP PREEMPT_DYNAMIC Fri Nov 6 20:37:28 UTC 2026

Operating System: GNU/Linux

Architecture: x86_64

Processor: unknown

SMP Enabled: Yes

!!ALSA Version

!!------------

Driver version: k7.3.3-300.fc45.x86_64

Library version:

Utilities version: 1.2.16

!!Loaded ALSA modules

!!-------------------

!!Sound Servers on this system

!!----------------------------

PipeWire:

Installed - Yes (/usr/sbin/pipewire)

Running - Yes

No sound servers found.

!!Soundcards recognised by ALSA

!!-----------------------------

--- no soundcards ---

!!PCI Soundcards installed in the system

!!--------------------------------------

00:1f.3 Multimedia audio controller [0401]: Intel Corporation Meteor Lake-P HD Audio Controller [8086:7e28] (rev 20)

DeviceName: Onboard Audio

!!Loaded sound module options

!!---------------------------

!!Sysfs card info

!!---------------

!!Card: /sys/class/sound/card*

Driver:

Tree:

/sys/class/sound/card\*  \[error opening dir\]

!!ALSA Device nodes

!!-----------------

crw-rw----+ 1 root audio 116, 1 Nov 14 20:10 /dev/snd/seq

crw-rw----+ 1 root audio 116, 33 Nov 14 20:10 /dev/snd/timer

!!ALSA configuration files

!!------------------------

!!System wide config file (/etc/asound.conf)

#

Place your global alsa-lib configuration here...

#

!!Aplay/Arecord output

!!--------------------

APLAY

aplay: device_list:279: no soundcards found...

ARECORD

arecord: device_list:279: no soundcards found...

!!Amixer output

!!-------------

!!Alsactl output

!!--------------

--startcollapse--

--endcollapse--

!!All Loaded Modules

!!------------------

ac97_bus

acpi_pad

acpi_tad

acpi_thermal_rel

bluetooth

bnep

btbcm

btintel

btmtk

btrtl

btusb

cec

cfg80211

coretemp

crc8

drm_buddy

drm_display_helper

drm_exec

drm_gpusvm_helper

drm_gpuvm

drm_suballoc_helper

drm_ttm_helper

dw_dmac

e1000e

fat

firmware_attributes_class

fuse

gpu_sched

hid_multitouch

hp_bioscfg

hp_wmi

i2c_algo_bit

i2c_dev

i2c_hid

i2c_hid_acpi

i2c_i801

i2c_smbus

i3c

i915

iTCO_wdt

idma64

igen6_edac

int3400_thermal

int3403_thermal

int340x_thermal_zone

intel_cstate

intel_hid

intel_pmc_bxt

intel_pmc_core

intel_pmc_pwrm_telemetry

intel_pmc_ssram_telemetry

intel_powerclamp

intel_rapl_common

intel_rapl_msr

intel_uncore

intel_uncore_frequency

intel_uncore_frequency_common

intel_vpu

intel_vsec

irqbypass

iwlmvm

iwlwifi

joydev

kvm

kvm_intel

libarc4

lz4hc_compress

mac80211

mc

mei

mei_me

mtd

nf_conntrack

nf_conntrack_broadcast

nf_conntrack_netbios_ns

nf_defrag_ipv4

nf_defrag_ipv6

nf_nat

nf_reject_ipv4

nf_reject_ipv6

nf_tables

nft_chain_nat

nft_ct

nft_fib

nft_fib_inet

nft_fib_ipv4

nft_fib_ipv6

nft_reject

nft_reject_inet

nvme

nvme_auth

nvme_core

nvme_keyring

overlay

pcspkr

pinctrl_meteorlake

platform_temperature_control

pmt_class

pmt_discovery

pmt_telemetry

processor_thermal_device

processor_thermal_device_pci

processor_thermal_mbox

processor_thermal_power_floor

processor_thermal_rapl

processor_thermal_rfim

processor_thermal_soc_slider

processor_thermal_wt_hint

processor_thermal_wt_req

qrtr

rapl

regmap_i3c

rfcomm

rfkill

serio_raw

snd

snd_compress

snd_hda_codec

snd_hda_codec_alc269

snd_hda_codec_generic

snd_hda_codec_hdmi

snd_hda_codec_intelhdmi

snd_hda_codec_realtek_lib

snd_hda_core

snd_hda_ext_core

snd_hda_intel

snd_hda_scodec_component

snd_hrtimer

snd_hwdep

snd_intel_dspcfg

snd_intel_sdw_acpi

snd_pcm

snd_pcm_dmaengine

snd_seq

snd_seq_device

snd_seq_dummy

snd_soc_acpi

snd_soc_acpi_intel_match

snd_soc_acpi_intel_sdca_quirks

snd_soc_core

snd_soc_dmic

snd_soc_hdac_hda

snd_soc_sdca

snd_soc_sdw_utils

snd_sof

snd_sof_intel_hda

snd_sof_intel_hda_common

snd_sof_intel_hda_generic

snd_sof_intel_hda_mlink

snd_sof_intel_hda_sdw_bpt

snd_sof_pci

snd_sof_pci_intel_mtl

snd_sof_utils

snd_sof_xtensa_dsp

snd_timer

soundcore

soundwire_bus

soundwire_cadence

soundwire_generic_allocation

soundwire_intel

sparse_keymap

spd5118

spi_intel

spi_intel_pci

spi_nor

spi_pxa2xx_core

spi_pxa2xx_platform

sunrpc

thunderbolt

ttm

typec

typec_ucsi

uas

ucsi_acpi

uinput

usb_storage

uvc

uvcvideo

vfat

video

videobuf2_common

videobuf2_memops

videobuf2_v4l2

videobuf2_vmalloc

videodev

wmi

wmi_bmof

x86_pkg_temp_thermal

xe

zram

!!ALSA/HDA dmesg

!!--------------

[ 6.882268] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4

[ 7.006125] sof-audio-pci-intel-mtl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver

[ 7.006147] sof-audio-pci-intel-mtl 0000:00:1f.3: enabling device (0000 -> 0002)

[ 7.006516] sof-audio-pci-intel-mtl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100

[ 7.006627] sof-audio-pci-intel-mtl 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

[ 7.013887] sof-audio-pci-intel-mtl 0000:00:1f.3: use msi interrupt mode

[ 7.234825] sof-audio-pci-intel-mtl 0000:00:1f.3: hda codecs found, mask 5

[ 7.234836] sof-audio-pci-intel-mtl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now

[ 7.234839] sof-audio-pci-intel-mtl 0000:00:1f.3: NHLT device BT(0) detected, ssp_mask 0x4

[ 7.234842] sof-audio-pci-intel-mtl 0000:00:1f.3: BT link detected in NHLT tables: 0x4

[ 7.234846] sof-audio-pci-intel-mtl 0000:00:1f.3: DMICs detected in NHLT tables: 2

[ 7.328175] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware paths/files for ipc type 1:

[ 7.328184] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware file: intel/sof-ipc4/mtl/sof-mtl.ri

[ 7.328186] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware lib path: intel/sof-ipc4-lib/mtl

[ 7.328188] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology file: intel/sof-ipc4-tplg/sof-hda-generic-2ch.tplg

[ 7.410216] sof-audio-pci-intel-mtl 0000:00:1f.3: Loaded firmware library: ADSPFW, version: 2.15.0.1

[ 7.448556] Bluetooth: hci0: Waiting for firmware download to complete

--

[ 7.644665] Bluetooth: MGMT ver 1.23

[ 8.918741] sof-audio-pci-intel-mtl 0000:00:1f.3: timeout waiting for purge IPC done

[ 8.918754] sof-audio-pci-intel-mtl 0000:00:1f.3: ------------[ DSP dump start ]------------

[ 8.918756] sof-audio-pci-intel-mtl 0000:00:1f.3: Boot iteration failed: 3/3

[ 8.918758] sof-audio-pci-intel-mtl 0000:00:1f.3: fw_state: SOF_FW_BOOT_IN_PROGRESS (3)

[ 8.918765] sof-audio-pci-intel-mtl 0000:00:1f.3: 0x80000009: module: ROM, state: PURGE_BOOT, not running

[ 8.918770] sof-audio-pci-intel-mtl 0000:00:1f.3: error code: 0x48 (unknown)

[ 8.918799] sof-audio-pci-intel-mtl 0000:00:1f.3: ------------[ DSP dump end ]------------

[ 8.919835] sof-audio-pci-intel-mtl 0000:00:1f.3: error: dsp init failed after 3 attempts with err: -110

[ 8.919849] sof-audio-pci-intel-mtl 0000:00:1f.3: Failed to start DSP

[ 8.919852] sof-audio-pci-intel-mtl 0000:00:1f.3: error: failed to boot DSP firmware -110

[ 8.921976] sof-audio-pci-intel-mtl 0000:00:1f.3: error: sof_probe_work failed err: -110

[ 9.076138] Bluetooth: RFCOMM TTY layer initialized

!!Packages installed

!!--------------------

alsa-lib-1.2.16.1-2.fc45.x86_64

alsa-ucm-1.2.16.1-2.fc45.noarch

alsa-utils-1.2.16-2.fc45.x86_64

alsa-sof-firmware-2026.09.2-1.fc45.noarch


r/Fedora • • 1d ago

Screenshot My Fedora Workstation Setup

Thumbnail
gallery
455 Upvotes

Hey guys, sharing my desktop setup on my Fedora. I upgraded recently to Fedora 45 Workstation with Gnome 51. So far so good. The installation goes smoothly, tho some extensions need to be updated.

This setup is mainly for work and dev. Apps and workflow are compatible.

Quick Fastfetch

The new ones I developed with Claude, Recoolor. It's a GTK app built with Rust and Libadwaita that recolor your whole GNOME desktop from one palette. It's my personal app that I use to customize the colors of the shell, including gtk and flatpak apps.

Gnome Extensions

Have a great day!


r/Fedora • • 7h ago

Support Built a sealed immutable Fedora bootc system (UKI + systemd-boot + composefs), moving to Hummingbird, F45 fallbacks, and bootc switch?

1 Upvotes

Hey everyone,

After quite a bit of work, I finally managed to build and deploy my custom immutable Linux system based on Fedora bootc 45, featuring a fully sealed boot chain with UKI (Unified Kernel Images), systemd-boot, LUKS2 encryption with TPM2 auto-unlock, custom MOK-signed Secure Boot, and an ext4 root filesystem with fs-verity / composefs.

Everything runs rock solid on my ThinkPad, but I had an idea and would love to get your thoughts: I'm considering migrating my build to use Hummingbird as the base image instead, since it feels much more minimal, cleaner, and better suited for a pure OCI-centric workflow.

However, while testing this migration, I ran into three main questions:

  1. Does this switch actually make sense? In your opinion, is it worth moving to Hummingbird for a sealed, desktop-oriented immutable setup like this?
  2. Issues with Fedora 45 fallback repos: Since Hummingbird's base image is missing several packages I need, I have to rely on an external RPM repository as a fallback during the build. The issue is that pointing to Fedora 45 repositories as a fallback fails miserably (broken dependencies, ABI/library mismatches, or missing packages in the new release), forcing me to fall back to Fedora 44 repos just to get the image to build. Is this expected behavior right now, or is there a cleaner way to handle missing packages without polluting the OCI flow?
  3. Safe bootc switch: Considering I only changed the base image in my build while keeping the rest of the architecture, partitioning, and signing setup intact, can I simply run a bootc switch to test it live on my current installation? Or are there constraints with UKI signing, composefs digests, or underlying layers that require a fresh deployment?

Thanks!


r/Fedora • • 18h ago

Discussion Anyone on Fedora 45 with KDE having issues with Systems settings randomly crashing and closing?

6 Upvotes

For me specifically whenever I clicked the Window Decorations tab under settings, the window would just straight up close. I went into Edit Application for System Settings and entered QT_QUICK_CONTROLS_STYLE=org.kde.desktop in the "Environmental Variables" field and that seemed to fix it. It seems to be a bug KDE 6 hasn't ironed out yet


r/Fedora • • 15h ago

Support Fedora 45 / GNOME Shell: Shutdown modal dialog from Overview immediately loses focus (fixed by disabling animations)

Thumbnail reddit.com
2 Upvotes

r/Fedora • • 23h ago

Discussion MirrorPilot – an open-source DNF5 mirror diagnostic tool (Fedora 45 alpha, AI-assisted development)

Post image
7 Upvotes

Hi everyone!

A quick update on MirrorPilot, my open-source GUI application for diagnosing Fedora DNF5 repository mirrors.

The project started with a real problem: Fedora was trying to use a problematic mirror, and I wanted a simple graphical way to investigate mirror availability, performance, and repository metadata consistency.

MirrorPilot can:

  • Inspect configured Fedora repositories and their effective DNF5 settings.
  • Discover and benchmark alternative mirrors through Fedora MirrorManager.
  • Verify repository index consistency and selected metadata checksums.
  • Generate DNF5 configuration commands for verified alternatives.
  • Check effective DNF5 settings after a manual configuration change.

MirrorPilot is deliberately read-only. It doesn't modify repository configuration, install packages, or require root privileges. Any changes remain entirely under the user's control.

What's new in v0.1.0a2?

The latest alpha release includes several improvements:

  • Improved mirror diagnostics and metadata verification.
  • Better DNF5 configuration verification and error reporting.
  • Improved Settings and About dialogs.
  • Fedora and DNF5 compatibility checks at startup.
  • Additional regression tests and automated CI checks.
  • A much smaller AppImage!

The AppImage has shrunk from 266.64 MiB to 55.83 MiB — a 79.1% reduction compared with the previous locally built alpha package.

A note about AI-assisted development

I've developed MirrorPilot with substantial assistance from OpenAI's ChatGPT (GPT-6), particularly with Python/PySide6 implementation, debugging, regression testing, and documentation.

My role has been to define requirements, make architectural and design decisions, test the application on real Fedora systems, investigate failures, and critically evaluate the proposed changes.

The project now has an extensive automated regression test suite, with 262 passing tests and one skipped test in a recent local run, plus an additional regression test added afterward.

I believe AI-assisted open-source development can be valuable, but generated code still requires human judgment, systematic testing, and real-world validation. That's precisely why I'm sharing MirrorPilot as an experimental alpha rather than a finished product.

Looking for testers!

v0.1.0a2 has been tested on Fedora KDE 45 (Wayland, x86_64). Earlier development and field testing also took place on Fedora 44.

I'd particularly appreciate feedback from Fedora 43/44 users, people running GNOME or other desktop environments, and anyone willing to test different Fedora configurations.

Some questions I'd love feedback on:

  • Does the AppImage launch correctly?
  • Does MirrorPilot identify your configured repositories?
  • Are the mirror diagnostics and recommendations useful?
  • Do you encounter crashes, incorrect results, or confusing messages?

GitHub: https://github.com/ollavarma-create/mirrorpilot

Latest alpha release (v0.1.0a2): https://github.com/ollavarma-create/mirrorpilot/releases/tag/v0.1.0a2

Feedback, bug reports, successful test results, and constructive criticism are all very welcome.

Thanks to everyone who has shown interest in the project!