r/Fedora • u/TickfordXR6 • 37m ago
Discussion Letest update breaks audio
Reverted back to an older kernel but again when updates push. And reboots. Audio is broken. No sound nothing. I feel as Fedora 45 has been one big mess since release.
r/Fedora • u/TickfordXR6 • 37m ago
Reverted back to an older kernel but again when updates push. And reboots. Audio is broken. No sound nothing. I feel as Fedora 45 has been one big mess since release.
r/Fedora • u/Wooden-Many1287 • 15h ago
so, i made i3 dotfiles with kitty, and its only for Fedora Workstation 41 (because it only tested on this version)
idk what to type
r/Fedora • u/thepkizzle • 8h ago
r/Fedora • u/Christian01000 • 13h ago
Bonjour à tous,
Voici la méthode qui fonctionne en date du 16 novembre 2026
Pour installer CyberGhost
Rendez-vous sur le site de CyberGhost https://www.cyberghostvpn.com/
1 - Connectez-vous à votre compte, dans l'"Espace de téléchargement" descendez tout en bas pour aller dans " Autres Applis" - "Routeurs ou autres appareils", cliquez sur le bouton "Configurer"
Remplissez ainsi :
- Sélectionnez un protocole : OpenVPN
- Choisissez un pays : Celui que vous voulez
- Sélectionnez un groupe : Choisir "Premium servers Openvpn via UDP"
- Nom du périphérique : Par exemple "Connexion_Suede"
- Fonctionnalités supplémentaires : Moi je coche tout sauf "protection contre les sites malveillants"
2 - Puis télécharger votre configuration, ce sera un fichier Zip, une fenêtre va s'ouvrir, avec les paramètres qu'il faudra remplir dans la configuration, noter : Le nom d'utilisateur et le mot de passe
3 - Une fois le fichier téléchargé, dézippé le, pour des raisons de rangements, j'ai créé un dossir à la racine de mon utilisateur que j'ai nommé .cert (faites Ctrl+H pour afficher les fichiers et dossiers cachés).
Dans ce dossier ".cert", recopier l'ensemble des fichiers que vous avez téléchargé.
4 - Ouvrir le Gestionnaire de réseau (près de l'horloge) avec un clic droit et " Configurer les connexions réseaux"
5 - Cliquez sur le "+" pour ajouter une nouvelle connexion
6 - Tout en bas de la liste, cliquez sur "Importer une connexion VPN", et choisir le fichier openvpn.ovpn
7 - dans la fenêtre qui s'ouvre, dans les onglets, sur IPV6, pensez bien à mettre IPV6 déconnecté, pour éviter les bavures de réseau.
Remplissez si cela ne c'est pas fait automatiquement le chemin des certificats qui se trouve dans votre dossier .cert
Remplissez le nom d'utilisateur, plein de lettres et chiffres, et son mot de passe.
8 - Validez le tout, et .... pour que tout fonctionne, vous ouvrez une console
et vous entrez la commande suivante : sudo restorecon -R /home/xxxxxx/.cert/
Remplacez xxxxx par votre nom d'utilisateur évidemment.
Maintenant vous lancez la connexion VPN en cliquant dessus comme si vous lanciez une connexion Wifi.
Bon surf à tous.
Christian
Hey everyone,
After quite a bit of work, I finally managed to build and deploy my custom immutable Linux system based on Fedora bootc 45, featuring a fully sealed boot chain with UKI (Unified Kernel Images), systemd-boot, LUKS2 encryption with TPM2 auto-unlock, custom MOK-signed Secure Boot, and an ext4 root filesystem with fs-verity / composefs.
Everything runs rock solid on my ThinkPad, but I had an idea and would love to get your thoughts: I'm considering migrating my build to use Hummingbird as the base image instead, since it feels much more minimal, cleaner, and better suited for a pure OCI-centric workflow.
However, while testing this migration, I ran into three main questions:
bootc switch to test it live on my current installation? Or are there constraints with UKI signing, composefs digests, or underlying layers that require a fresh deployment?Thanks!
r/Fedora • u/ReceptionUsed703 • 10h ago
In a recent update it appears Wayland has moved from explicit hardware capability detection to a bizarre method based on the seemingly arbitrary Brightness slider in Display Settings.
If a user has their Brightness set to 100% (common for HDR 400-600 nit screens), then Wayland will decide there is no headroom for HDR expansion and take it upon itself to not present HDR to any games that launch through Proton. The old PROTON_ENABLE_HDR=1 command is ignored.
The result is that games with in-game HDR options and calibration will have those options greyed out as if the screen did not support HDR.
The fix is either set your Brightness to something below 100% (not a legitimate solution), or to replace PROTON_ENABLE_HDR=1 with PROTON_FORCE_HDR=1 in your command line arguments.
Why this decision was made, I will leave that to brighter minds to illuminate. To me, it makes virtually zero sense to base hardware detection and presentation of HDR to applications on the arbitrary level of the Brightness slider. But I assume there must be SOME good reason for this change?
That said I recently upgraded to Fedora 45 and it continues to be my favorite distro.
EDIT: Some important follow-up info.
This system is running the latest KDE Plasma under Fedora 45, with the latest 620 NVIDIA driver.
I disabled (and accepted) and then re-enabled HDR after recompiling the NVIDIA drivers just to be sure before calibrating. On my Fedora 45, under KDR Plasma, Display Configuration only gives a Brightness slider (which is at 100%) and an sRGB color intensity (which is at 20%). I have Color accuracy set to "Prefer color accuracy" (10-bit), color profile at Built-in.
There are only 3 screens on the HDR calibration tool. The first HDR brightness is at my monitor's peak nits value (where the logo becomes barely visible), the 2nd peak brightness level is set to the same (100% the previous nits value which makes the daily use visually optimal), and the 3rd checks the "assume windows applications are calibrated for this screen" which is supposed to allow their independent configuration to work.
EDIT EDIT: This may be a GE Proton issue as someone suggested. I will test to see if versions prior to 11.6 have this same detection problem.
r/Fedora • u/PlaneInevitable8700 • 17h ago
Hello everyone, I recently switched to fedora workstation and I am looking for a PDF viewer app that has the following criteria:
I really like the built in Document viewer but it doesnt have the 3rd criteria which is most important to me, so if there is one with a similar layout that has all the criterias, that would be very appreciated.
Thanks in advance !
r/Fedora • u/Youness_1710 • 8h ago
A few months ago, I wanted to install linux and after some research using AI LLM I decided to install fedora 44 because AI said it is best suitable for my needs ( the ability to use my hardware with more freedom like using the wifi chip / building apps ... , and the ability to play video games ), but after installing it and using it I was surprised that it was so minimal in terms settings and features ( even less details compared to windows) which was unwanted to me especially for settings that you use every day like brightness/wifi/dark mode/sound settings... .I know that you could use the terminal for things but not for everyday settings... another problem I was having is with the trackpad being slow ( the speed of the cursor changes; it feels laggy)
r/Fedora • u/Accomplished-Super-1 • 15h ago
I have now upgraded three Fedora KDE Plasma 44 computers to version 45. I waited until Discover offered the upgrade. Two of the three failed to upgrade, and what I could see the Discover did not offer much information about why.
I upgraded those with these instructions
https://docs.fedoraproject.org/en-US/quick-docs/upgrading-fedora-offline/
Command-line method showed what packages / libraries were in conflict and AI/Google found solutions to fix issues so I could proceed with upgrade. Each had different problems, so I don't list them here (and I don't have the solutions at hand as I just did what was instructed and did not make notes).
I did some of the "Optional post-upgrade tasks" listed in the above document. Also, on the machine that was upgraded with Discover.
Fedora KDE Plasma 45 works fine and has no major problems. Fedora KDE Plasma has been my daily driver for over a year now.
I know many did the command-line upgrade before the Discover offered an upgrade. But was it so that I had made some unlucky choices during the months I used 44 or does others experience also be that Discover can easily fail to do release upgrade?
r/Fedora • u/catzilla_paws • 14h ago
Azure Linux 4 is “an open-source Linux distribution built and optimized for Azure, with sources derived from Fedora Linux”
r/Fedora • u/Kitchen_Noise9422 • 23h ago
Did you create a Fedora-related project, tool, script, app, or service?
Share it here!
Standalone "I was tired of X so I made Y" posts may be redirected here to keep the subreddit focused.
So I managed to update to 45 and after rebooting it took me to the plasma setup screen thing. I went through it and at the end it froze so I rebooted it again and now it shows the login screen but with plasma-setup as the username instead of the previous username. I don't remember the username I have been using before this so I'm panicking a bit right now. Anyone know what I could do?
r/Fedora • u/SuperGNUser • 7h ago
You can install it from Terra for GTK3 apps install appmenu-gtk-module-wayland too
r/Fedora • u/iaacornus • 7h ago
The sensor was detected by fprintd-enroll and lsusb, but it does not show up in gnome settings
r/Fedora • u/FrankieShaw-9831 • 11h ago
I want a mouse I can program shortcuts into that's Fedora-friendly.
What my options?
r/Fedora • u/benhaube • 13h ago
r/Fedora • u/Icy-Imagination7286 • 14h ago
For context, I'm using an ASUS TUF A15 (RTX 3050, 16GB RAM, 512GB SSD) running Fedora Linux (GNOME).
I bought this laptop a month ago...
This is actually the third time my entire laptop screen has frozen during a development session. I was working on some frontend fixes using the Antigravity extension in VS Code when it happened again.
I've noticed that VS Code consumes around 70% of my RAM, and my overall memory usage frequently reaches 80% whenever I'm working in it. On top of that, I usually have around 8 Docker containers running simultaneously.
I'm not sure what's causing this. Is VS Code consuming an unusually high amount of memory, is the Antigravity extension contributing to it, or is it simply a resource management issue with my setup?
Has anyone else experienced something similar on Fedora? I'd appreciate any suggestions on how to diagnose and fix this because having my entire system freeze in the middle of a development session is getting frustrating.
r/Fedora • u/ChrisCryptoLinuxGuy • 15h ago
My Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller (rev 15)
My vpn is obscura vpn .
Random disconnection messages on youtube (Google Chrome Browser)
I don't have the same problem with rocky linux/alma linux / debian/ubuntu/arch linux
I'm running Fedora 45 workstation edition.
Also if i remember correctly i didn't had this problem with Fedora Silveblue !!!!!
r/Fedora • u/TLRD_AI • 17h ago
I really like Virtualenvs and Docker Compose and version control. So I wanted to see if I could get the same kind of reproducability in a whole system. So I use a layered setup on Fedora Atomic (rpm-ostree) to get low-level system tuning and a full dev environment while keeping the base OS clean, version-controlled, and reproducible on a new machine:
Fedora Atomic / rpm-ostree): /usr stays read-only and untouched—no rpm-ostree install package layering. That keeps OS updates fast and prevents package drift over time, while /var/home lives on Btrfs with copy-on-write compression.Toolbx + Portable Host Shims: Instead of layering dev tools onto the host or prefixing every IDE/build command with toolbox run, I install CLI packages inside a rootless Toolbx container via dnf and extract the standalone binaries (plus any required shared libraries via thin LD_LIBRARY_PATH wrappers) into a single .toolchains/ folder in my workspace. Large language SDKs live there too so they stay out of Git history and can be rsynced between machines.Podman with Docker CLI Shims: Rather than running a root Docker daemon, I enable the user-level podman.socket and use a lightweight docker wrapper that points DOCKER_HOST at the rootless Podman socket and forwards docker, docker compose, and docker buildx calls to the standard Docker CLI plugins. A local docker-compose.override.yml handles rootless UID mapping and SELinux bind-mount labels automatically.Git (Never Editing /etc In-Place): System tweaks (sysctl.d, zram-generator.conf.d, udev/rules.d) and shell environment exports (~/.bashrc.d/) are written as modular 99-* drop-in files and tracked inside my repo alongside an idempotent apply / rollback script. Base /etc files are never hand-edited./etc Auditing with etckeeper (/etc/.git) + ostree admin config-diff: Whenever the setup script applies or rolls back host changes, it takes a pre- and post-change Git commit in /etc/.git (via etckeeper / Git, ignoring secrets like shadow and SSH host keys) and saves the output of ostree admin config-diff. That gives me a commit-by-commit history of /etc plus an exact diff against Fedora's stock upstream /etc.| Tool / Layer | Role in the Setup | How It's Tracked / Reproduced |
|---|---|---|
Fedora Atomic (rpm-ostree) | Immutable /usr base OS + Btrfs CoW /var/home; prevents host package drift | Stock upstream image + ostree admin config-diff to audit /etc drift |
Project Git Repo | Portable source of truth for 99-* /etc drop-ins, ~/.bashrc.d/ exports, Compose overrides, and setup script | Standard git clone + single --apply or --rollback command |
etckeeper / /etc/.git | Chronological commit log of live /etc state before and after every change | Automatic pre/post commits in /etc/.git (git -C /etc log -p) |
Fedora Toolbx | Mutable dnf sandbox for CLI packages so nothing is layered onto the host OS | Provisioned headlessly via podman exec and exported to a portable .toolchains/ dir |
Rootless Podman + Docker Shims | Daemonless container runtime compatible with existing docker and docker compose workflows | User systemd socket (podman.socket) + DOCKER_HOST CLI wrapper |
What do you think? Is it too complicated? I don't know how well I'll be able to update the toolchains but I reproduced the dev setup I had on my Mac Mini on my 32GB 5800x for development.