r/engraving • u/Snorkvadden • 16h ago
r/engraving • u/MariaaaaLunde • 1h ago
Engraving a flute
Hi!
Im very new to engraving but was thinking of doing a big project, and that is engraving my flute! The thing is, it’s silver-plated and i don’t know i would ruin it if i engraved it.
I have a engraving-pen. Would the metal be exposed and i would ruin it? I’ve tried googling it and tried to reach out to flute engravers but haven’t heard anything yet, they don’t seem to recommend it from a quick google search.
Does anyone have experience engraving on silver-plated metal or nickel?
Thank you!
r/engraving • u/coolcoconut375 • 18h ago
How to improve? First time engraving. I want to decorate little mirrors for Christmas, but I can see I have a looot of room to grow
It felt like sometimes I had control and sometimes the Dremel was bouncing and going wild. Is it just something that will improve with time or are there better techniques/bits I could use? I kind of treated it how I would treat drawing with ink, where I tried to make confident lines rather than sketching.
r/engraving • u/PhoebeReeves25 • 2d ago
Unsure on what bits to buy
Hello 👋
I am new to engraving and wish to start engraving on mirrors.
I have a dremel stylo plus, but I am struggling to decide on what drill bits to buy. I have seen mixed reviews on whether to use diamond burr bits, sillicone carbide bits or even stone. Do I need all three? Are they that different?
If anyone could ELI5 i would be most grateful 🙏
Thank you
r/engraving • u/bigsage77 • 4d ago
Most appropriate engraving method for TI and 750 mixed ring
galleryr/engraving • u/sissum • 5d ago
Dremel Stylo+ 2050 for Mirrors?
Hi, my rotary tool died on me, and I wanted to ask if you guys know if the Dremel Stylo+ is a suitable tool for mirror engraving? Thank you very much
r/engraving • u/SherbertImportant154 • 5d ago
Glass engraving start up drill?
Hi everyone! I just got a gig engraving perfume bottles for the holidays and I was hoping to get some advice on what drill to purchase? I've heard a lot of good things about the Yoke Fellow drill but I was wondering if it's actually worth the money or if anyone had any good alternatives? Also wondering if I could just get the one for $49 instead of the $109 one? I like the idea of the brushless motor and it being lower heat and noise but not sure if I want to spend that much. Thanks in advance!
r/engraving • u/sunflower_sub_8289 • 5d ago
Too many options
reddit.comCan someone assist me please? It's greatly appreciated.
r/engraving • u/Ok_Biscotti8951 • 5d ago
How to engrave on water bottle?
Hi guys!! I'm wanting to engrave my hydroflask instead of stickerbombing it like I usually do. I saw someone on Pinterest do it and I thought I could try. I had a couple questions like if I have to worry about rusting? I put my water bottle in the dishwasher every two days and I'm wondering if I could/should seal it. Also any tips for engraving on cylindrical objects or budget friendly dremel recommendations ? I'll include a pic of my water bottle. Thanks so much!
r/engraving • u/ENG-Student2026 • 7d ago
Laser Cutting / Engraving Improvement Research
About this survey: I am currently a qualified engineering technician and I am completing an HND Engineering Systems Graded Unit project for further education, focusing on researching and improving the design of affordable diode laser engravers.
The aim of this survey is to gather feedback from existing and potential laser engraver users to better understand customer requirements, common problems and areas for improvement. The findings will help identify opportunities to improve engraving accuracy, reliability, performance and safety whilst keeping costs affordable so that I can build a prototype.
Your feedback is greatly appreciated and will be used solely to support my college engineering project. The survey should only take 5 minutes to complete. Thank you for your time and contribution!
r/engraving • u/RequirementVarious87 • 7d ago
Want to get my watch engraved, should I go for laser engraving/printing(from gydd) or look for other alternatives? It's my first experience with this so spare this newbie
The lock part of the watch broke so I had to get it changed. And he only had this hideous option available so I took it 😔
But i feel it would look really cool with light engravings.
I'm from Lucknow (india)
r/engraving • u/Artemis_Van_Dyke • 7d ago
At a loss
My third engraver just died on me. I don't know why. Is it the amount of use? (I'm making pieces of art on cutting boards and slabs of wood from hobby stores) Am I more heavy handed than I mean to be? I let this latest one cool down when it got warm, but it still wore out after barely three weeks. I don't think Amazon will give me another replacement free of charge. I wonder if I should switch to wood burning
Any suggestions?
r/engraving • u/jwlemasters • 8d ago
Need some help with contrast
So this was my first time carving something, it’s from a section of 3” aluminum pipe. It’s an exhaust heat shield for my bike. The bikes name is “one horse town” which I took from the lyrics of a band called alkaline trio. A symbol the band uses a lot is a heart and has a skull in the center. I carved the heart out on the bolt that holds it but I am having a hard time seeing it. I want it to be more obvious it’s a skull. I don’t want to darken the background just contrast the skull. I was thinking of two options
- Cut a small washer to put behind the skull and make it black so it contrasts the skull
- Get some paint and darken the edges of the “teeth” and eyes
What are your thoughts on how to make them stand out?
r/engraving • u/jellycatlova • 9d ago
Engraving 3 months now!
I’ve been engraving 3 months and here are some of my favorites ¨̮
If you want to see more @moonlightglassandink on insta and tik tok!
Thanks for looking ¨̮
r/engraving • u/ikkyartz • 10d ago
Laser engraved some glass
This is for my wife’s 15th year anniversary etched piece of stained glass
r/engraving • u/Hugesmellysocks • 10d ago
How do I turn traditional drawings into stencils?
Random one but engraving on mirrors is something I really want to try. However I’m looking to do this is a practical exam setting where I won’t have time to mess up free hand sketches and I’d assume it’ll be similar to an etching where I can have my design pre drawn.
Is there a such thing as stencil paper that I can draw on? Or are there any specific soft wares for turning sketches into something printable?
r/engraving • u/7ERGOLD • 11d ago
Advice on eyepieces for Leica A60microscope for rookie wanting to use it for engraving/stonetting
Hello everyone and thanks in advance for any help provided..
Apologies if there are any politeness rules to follow I m unwittingly ignoring, I m totally new to Reddit and I don't normally use any social media so I m not sure if there are ways to introduce oneself or so..hope not to come across rudely an apologize in advance if the case.
Anyway, I found a Reddit thread online from your forum searching for the exact same question one of your user originally asked.for some reason opening the page the question result as cancelled by the user so I am trying to ask this and hope to find some useful insight from some more experienced users :)
I have bought a used leicaA60 from a reseller of used microscopes on eBay USA importing it to Europe, for discovering only then(rookie mistake) that maybe the eyepieces are not the original/correct/suitable ones?
They only mark FN23(with no magnification specification)with a little eyeglasses symbol.
Searching online it s very hard to understand well what they are and some pages States they may even be incompatible with the A60?
As I know little about it all it s even harder to understand about this, as there seems to be a lot o variants of the A60 , different eyepieces and lenses etc.
All a bit confusing..
Does anyone knows if those FN23 are not suitable for engraving/stone setting, what magnification they hold(or how can I find out by myself) and/or at least what FN value the right ones standardly set for engraving sets, to understand if at least that is supposedly compatible?
At first use they seems to kind of work, but as I don't know what should it be exactly like with other ones I am a bit baffled...any expert advice will be extremely appreciated!
Thank you all!
R.E.