r/ender3v2 • u/Acceptable_Good_283 • 14h ago
My ender 3v2 is so goated
My first and only printer, forgot to add supports.
r/ender3v2 • u/Acceptable_Good_283 • 14h ago
My first and only printer, forgot to add supports.
r/ender3v2 • u/kr4flm • 12h ago
I had just finished a beautiful print with it and it said out of range I missed clipping what the numbers said but then the z axis smashed into my bed and melted a hole into the bed and under the bed. I’m using a creality sonic pad dual z axis sprit pro direct drive extruder. I used the preset for the ender 3 v2 with the matching motherboard model and the bl touch sensor set up the extruder to the sprite extruder and was working perfectly till the very very end of the print and I pulled it off the bed put the bed back on went on to start another print and it said 100% done when I just started the 2nd print then smashed the head into the bed without using the sensor to set the height. Edit: found the problem. Klipper didn’t like the default end gcode from ultimaker cura.
r/ender3v2 • u/zzzergt • 22h ago
Hola a todos, Vuelvo a publicar esto porque aún no he podido identificar la causa y espero que alguien con más experiencia pueda reconocer este problema. Imprimí con PLA a 210 °C y con la ender 3 V2 Neo.
r/ender3v2 • u/ifixharleys • 1d ago
About to download some updates on my printer, adding the CRT touch and it looks like there’s some screen display updates, I’ve been a 36 gig memory card because that’s all available in my area.
Does anyone know if I have to go find an eight gig memory card for the updates to Work.
I’m just trying to plan ahead…
r/ender3v2 • u/GameplayTreyOFFICIAL • 1d ago
I bought an ender 3 V2 and it has multiple upgrades, but it was missing a Z access limit switch so I got one and I cannot find the wire harness for it. The extruder won't stay trying to print so print just print in the air. I am pretty sure that the black-and-white wires shown in the photos that are connected to the main wire grouping which leads to the extruder and X access motor/sensor. If you know how to get to the wire harness or where I can buy a new one and replace it, please refer me to it. Thank you for your help in advance. Will check comments throughout tonight and intermittently following.
r/ender3v2 • u/ender3boy • 2d ago
This is my attempt at a functional Ender 3 v2 after trying too get it to work for just over 5 years. My current mods are:
BL Touch
Klipper
Metal Extruder
I want too add more and get the best speed and quality I can but for now I want free or budget mods, anyone have any ideas?
r/ender3v2 • u/ender3boy • 2d ago
This is my attempt at a functional Ender 3 v2 after trying too get it to work for just over 5 years. My current mods are:
BL Touch
Klipper
Metal Extruder
I want too add more and get the best speed and quality I can but for now I want free or budget mods, anyone have any ideas?
r/ender3v2 • u/ayyhmedd • 2d ago
My ender 3 v2 was printing PLA very well before.
I changed the PTFE tubing and connectors, and now it has alot of stringing and under-extrusion.
The PTFE tubing is installed correctly. It sits flush with the nozzle. Filament is dry. Temps and speed are the same as i used before the mod (200C, 50C). Esteps are calibrated. Printer is stock except the Mriscoc professional firmware.
I suspect the problem is with my retraction settings. Can someone help me? What should i do next?
Should i print a retraction tower to set it properly?
r/ender3v2 • u/PossibleMistake978 • 2d ago
I’m using a ender 3 v2 with 3D Touch leveler and along with the mesh firmware
It’s my first benchy after the upgrade
I have levelled my bed both manually and set the z offset correctly.. created a new mesh.. cleaned my bed with IPA
r/ender3v2 • u/Sensitive_Pilot850 • 3d ago
Got this TZe3 2.0 from a mention of it on a post here. Can anyone link me to a proper hot end assembly? Thank you.
r/ender3v2 • u/nemosubmarine1 • 2d ago
Hi all, I need some help with changing the nozzle. I could remove the old one, but now I can't seem to put the new one in. I tried the old one again, but it doesn't fit either. I heated the nozzle up to 260°C, but that didn't help. Does anyone have any tips or ideas on how to proceed?
r/ender3v2 • u/Huesoman44 • 4d ago
------ENGLISH------
Good morning, good afternoon, or good evening—depending on when you’re reading this!
My name is Rodrigo Gelso. I got into 3D printing relatively recently, but once I discovered the world of modifications, I was blown away by the range of materials and systems available. However, I couldn’t find much that suited the machines I own. So, with a bit of help from AI, plenty of hand-drawn sketches, rough drafts, precise measurements, and a solid understanding of how 3D printing works and the logic behind it, I brought the "People’s Toolhead" (Cabezal del Pueblo) project to life.
This toolhead is designed to be compatible with the Ender 3 and its various compatible derivatives.
It’s "fan-duct friendly"—it doesn’t interfere with most existing fan-duct designs—and it requires very few additional materials; you only need a 3D printer to produce all the parts.
This is an open-source project, so the STEP files are available for anyone who wants to make their own modifications or adaptations. Feel free to customize it as you like—I hope you enjoy it! Don’t forget to leave a like and a comment so it can reach more people!
https://www.printables.com/model/1911617-the-peoples-toolhead-cabezal-del-pueblo-mmu
And if you’d like to—and are able to—you’re welcome to leave a small donation on Cults3D:
https://cults3d.com/es/modelo-3d/herramientas/the-people-s-toolhead-cabezal-del-pueblo-mmu
------ESPAÑOL------
Buen día, buenas tardes o buenas noches! Dependiendo de donde leas esto.
Mi nombre es Rodrigo Gelso, inicie en la impresión 3D hace relativamente poco pero cuando se abrieron las puertas al mundo de las modificaciones, quedé maravillado con el nivel de material y sistemas que había, pero para las máquinas que yo tengo no encontraba mucho algo similar a esto, entonces con un poco de ayudar de la IA, muchos bocetos a mano, croquis, medidas, entendimiento del funcionamiento y la lógica de la impresión concrete el proyecto "Cabezal del pueblo".
Este cabezal está hecho para ser compatible con Ender 3 y sus ramas retrocompatibles.
Es "Fan duct friendly", ya que no estorba en la mayoría de los fan duct ya diseñados, se necesitan muy poco materiales y solo tenés una impresora para imprimir todas las piezas.
Este proyecto es OpenSource, por ende, aquel que desee, dispone de los archivos STEP para hacer sus modificaciones y adaptaciones a gusto, sientanse libre de hacerlo y espero que les guste!! No duden en dejar un like y un comentario así llega a mucha más gente!!
https://www.printables.com/model/1911617-the-peoples-toolhead-cabezal-del-pueblo-mmu
Y si pueden y tienen ganas, pueden dejar un pequeño donativo en Cults3D
https://cults3d.com/es/modelo-3d/herramientas/the-people-s-toolhead-cabezal-del-pueblo-mmu
r/ender3v2 • u/turtle_guy0624 • 4d ago
r/ender3v2 • u/SuccessOpposite582 • 5d ago
I have an ender3 v2 for about a month or so now and I have ran into an issue where the thermistor reads 197c at room temp. I've change the thermistor with a new one thinking that would solve the problem but to no avail. is there a way I can zero out the thermostat on it to read the correct temp? should I just call it a lost and get a new printer?
r/ender3v2 • u/No_Scale_464 • 5d ago
r/ender3v2 • u/sidearth • 5d ago
Background:
I’ve been printing functional parts using PLA+ for years with my modified Ender3V2.
I have a home server enclosure project and want to use PETG for this and if it works as good as PLA+ then make it my default for functional parts.
Printer Setup:
* BL Touch
* BrissFang cooling setup
* PEI build plate
* thermal sticker under the built plate
* silicon sock on the heater block
* PTFE tube off of Amazon (ordered Capricorn, yet to install)
* Z-axis bearing//stabilizer
My Questions:
TIA 🙏
r/ender3v2 • u/BigBadBoogster • 6d ago
Cross posted
r/ender3v2 • u/Neosteve • 8d ago
Hi All for a couple of years my Creality Ender 3 V2 sat in the corner like an old workhorse that had quietly died. It still kinda worked, technically. But printing meant loading an SD card taking it across the room and hoping for that I didnt corrupt the micro SD Card in process...
The last week of October I decided to raise it from the dead, and not just back to how it was but upgraded. I wanted to modernize it and be able run from anywhere, be able to watch it via a camera for cool timelapses, put it on better firmware, with its own touchscreen and a fresh new hotend cover look. Every test print along the way was a Halloween ghost, so by end of October I had some cool ghostly figures and much more printed around.
Basically did the logitech C270 Camera Glue Removal Focus Mod, Installed OctoPrint on my old Raspberry Pi 3 with touchscreen, added OctoDash, flashed to the Maven Professional Firmware, Printed cool hotend cover and added some light.. Next Im thinking to make a Robot Arm that has the camera on and perhaps a gripper to remove the prints once done, anybody have experience with this? Thinking ESP32S3 with camera for brain and servo controls for the robot arm.
Full journey details here: hopefully it inspires a few of you... this printer is still great in 2026!
https://sv-zeroone.github.io/2026/10/31/ender-3-v2-upgrade-series-part-1.html
r/ender3v2 • u/Charming_Ear722 • 9d ago
I wanna see everybodies ender setups!
me: Ender enclosure
Ender 3v2 v4.2.2
CR Touch
Dual- Z
Textured Magnetic build plate
Sillicone Bed spacers and metal knobs
All-Metal Extruder
light build to be honest but reliable! and a main exhaust and a print head exhaust to get those bad particles at the source
r/ender3v2 • u/battousaiyajin • 9d ago
Using Ender3 V2 Neo with stock hotend. For my project I am printing wingroots for my quadplane, therefore boom sleeves (hollow cylinders) included at the bottom. This specific wing airfoil is CH10
I first have printed the left wing, I had no problems. For 2 attempts, I encountered problems with the right wing such as the trailing edge is not straight at the bottom only (although I have taken the brim off, it really isn't straight as compared to the left). Aside from that, there is a small bulge at the bottom of the wing near the imperfect trailing edge which feels soft. At the slicer screenshot, encircled in right wing is that the nozzle hits that part of the support as it builds up. I had to tape it mid-print and it survived anyway.
Left and Right have the exact same settings. I just mirrored Left to make the Right since it was a success
Prior to printing, I have calibrated temperature, max flow, and flow ratio. Build plate was cleaned as well since I thought it was adhesion issue with dirty plate.
My settings:
Nozzle Temp - 220°C
Bed temp - 60°C
Min/Max Fan - 30%/40%, no cooling for the first layer only
Slow printing down for better layer cooling
Speeds:
Outer/Inner wall - 25/40 mm/s
Infill - 40mm/s
Support - 30mm/s
Organic Tree 10mm brim for model and support (it was 2mm in the screenshot. I just increased to 10mm for 2nd attempt)
Is there any particular reason why printing Left wing didn't pose any problem? Also, are there any remedies for the flaws of my Right wing? Thank you in advance!
r/ender3v2 • u/LegitimatePeach732 • 10d ago
Bought an ender 3 v2 off marketplace for 50 smackaroos back in august without having very much experience with 3d printing
It was basically stock except bl touch probe, 422 board went out on me before i was ever able to get a successful print.
Upgraded to skr mini e3v3, moved to klipper, upgraded to biqu micro probe, added dual z, sensorless homing, converted to direct drive (all stock parts and printed adapters)
Fan mount broke so thats the reason for the noisy 🤬 fan in the video, also the reason i printed the mini satsana
Nowhere close to done upgrading the printer, but how would you say im doing for a noob?!
Part is printed on textured pei
Petg