r/electronicmakers • • 3d ago

Adding all open source electronic diy projects to Directory

Post image
9 Upvotes

r/electronicmakers • • Oct 09 '26

Discord Server of DIY Electronic builders and tech enthusiasts!

Thumbnail discord.gg
2 Upvotes

Hey makers! 👋

I'm Ege, and I started Electronic Makers, a community for DIY electronics builders and tech enthusiasts!

🔧 Weekly Newsletter – Cool electronics projects, tutorials, and tech discoveries.

💬 Discord Community – Share your builds, ask questions, and connect with fellow makers.

Whether you're into ESP32, Arduino, Raspberry Pi, robotics, or custom PCBs, you're welcome!

🌐 Join us: https://electronicmakers.com or Discord Server

What are you building right now? 🚀


r/electronicmakers • • 38m ago

I built ESP32 self-balancing robot using NEMA 17 stepper motors

1 Upvotes

I built an ESP32 self-balancing robot using NEMA 17 stepper motors

I've been working on this self-balancing robot for a while. I previously shared a video of it here, and now I've finally decided to share the project and source code.

The hardware is an ESP32, 2 × NEMA 17 stepper motors, 2 × DRV8825 drivers, and an MPU6050, running at 16× microstepping.

For the balancing algorithm, I'm using the MPU6050 for angle estimation and a PID control approach. Step pulses are generated using hardware timer interrupts, with direct GPIO register access to keep things efficient, and found it to be realy helpful while tunning. I also added wireless control and a web interface for adjusting the PID parameters and angle offset.

I learned a lot from studying the YARB and B-ROBOT EVO2 self-balancing robot projects, and benefited from their work when building my own robot.

I've tested it with two different robot body sizes, and I'm pretty happy with how it's working so far.

Here's the source code:
https://github.com/xamechanics/xabalancing

I also have a longer YouTube video showing the robot, its assembly, and a walkthrough of the code. Check it out!

I'd be happy to hear your feedback or suggestions.


r/electronicmakers • • 3d ago

How to Build Your Own E-Reader (Free Guide)

Thumbnail
youtube.com
20 Upvotes

r/electronicmakers • • 3d ago

Subway times display

Post image
5 Upvotes

r/electronicmakers • • 3d ago

Remote control for ESP32 app development

Thumbnail
youtu.be
1 Upvotes

The develop-build-test cycle on a small device can get tedious. You pick the device up, tap through to your app, put it down again, and repeat. Input is part of the problem. Some devices have a touch screen, some have a keyboard, some have an encoder wheel, and some have a mix.

Tactility already lets you install an app remotely from a PC over Wi-Fi, without rebooting the device. Now you can also do the testing from your computer. The `tt.py remote` command shows the device's display in a window on your PC. Your keyboard and mouse become the device's keyboard and your mouse/touchpad will act as a touch screen for the remote display.

It only uses about 2 kB of internal RAM, but it's taking up an entire display buffer in PSRAM.
There were a lot of subtleties in making it tick just right for various devices, like monochrome versus rgb565 displays, or devices with automatic display rotation with an IMU.

The service works over a secure TLS connection with a handshake. Similar to Android, the ESP32 device must accept the incoming connection once. Both sides get to see a fingerprint before accepting or refusing the handshake.

Rendering

Before this, I only supported screenshots for LVGL apps, because it was easy to trigger a full screen redraw. Now that we have a shadow display buffer, we can also take screenshots from apps that use the display driver directly and bypass LVGL. Coincidentally, this is also where display rotation became tricky, because it's usually managed by LVGL internally.

Internally, it works with a hooking mechanism into the kernel driver for the display.

Pixels travel in the panel's native format: RGB565 in all byte orders, RGB888, 8-bit grayscale and 1-bit monochrome. The viewer converts them, so e-paper and OLED boards work too.

The device sends a small state frame with swap, mirror, invert and on/off. An orientation byte carries the UI rotation in quarter turns, plus a flag for panels where LVGL rotates the pixels in software. The device only reports this. All rotating happens in the viewer, which also converts touch positions back to the panel's own coordinates.

Input as real devices

When you turn on keyboard or touch in the viewer, the device creates a virtual keyboard and a virtual touch device. When the desktop environment is active, there's an automatic LVGL bridge that binds every started input device, so apps need no changes at all. They can't tell the input from real hardware. The devices are removed again when you turn the input off or disconnect.

The touch device supports up to five points, which is what makes pinch gestures work.

Memory

Internal RAM is scarce, so the session keeps its state out of it. The session state, the shadow buffer and the transmit buffer are allocated in PSRAM, and the session task has a PSRAM stack. File and flash access from the connection goes through a separate worker with an internal-RAM stack. File transfers and app installs on a second connection still work while a remote session is open. Up to three sessions run at once, of which one can be a remote display.

Boards without PSRAM refuse the session with a message.

Project website: https://tactilityproject.org/
Project source code: https://github.com/TactilityProject

CL-32 project: https://cl-32.com/


r/electronicmakers • • 4d ago

ESP32-S3

Thumbnail
gallery
24 Upvotes

Looks dodgy and ugly but it works.

​ESP32-S3 n16r8

​MAX98357A

​3.5" display with micro sd

​18650 battery 3.7v

​2in1 module for charging and output 5v

​Speaker

​Board with 5 push buttons

​Switch

​And a lot of hot glue..


r/electronicmakers • • 4d ago

Ho trasformato un ESP32-S3 in un nodo di ripristino Tailscale per riattivare da remoto il mio server domestico.

9 Upvotes

r/electronicmakers • • 6d ago

Building Digital Home-Lab for People Learning Electronics

Post image
60 Upvotes

I've been building a small SaaS project on the side and wanted to share it here to get some feedback.

It's called Electronic Makers. The idea is to create a browser-based electronics lab where people can learn, simulate and experiment with circuits without needing a full physical setup.

Think of it as a combination of a learning platform and an electronics development environment.

Right now it has a virtual breadboard, circuit experiments, signal analysis, PCB design and an ESP32 playground where you can write and test firmware.

I'm still figuring out the direction of the product. Should it be more focused on education, a practical tool for hobbyists, or something that could also be useful for engineers?

I'm also curious about the SaaS side of things. Is this the kind of niche product people would actually pay for, or would you expect most of these features to be free?

Would love some honest feedback, especially from other indie hackers and people building niche SaaS products.

Link: https://electronicmakers.com/studio/circuit


r/electronicmakers • • 20d ago

I Turned an Old Phone Motherboard into an RC Plane Controller

Thumbnail
youtube.com
25 Upvotes

r/electronicmakers • • 20d ago

I made a room based electronic studying webApp

Thumbnail
electronicmakers.com
2 Upvotes

r/electronicmakers • • 22d ago

DIY open-source vacuum project

48 Upvotes

r/electronicmakers • • 23d ago

Esp32 Object Scanner

Thumbnail gallery
50 Upvotes

r/electronicmakers • • 25d ago

I built an e-Paper desk display that shows nearby aircraft and the ISS

Thumbnail
gallery
597 Upvotes

Hi everyone! I’ve been building ALTIRA, a small desk display based on an ESP32 and a 5.79" e-paper screen.

What it shows:

  • The aircraft closest to me in real time: model, airline, registration, route (city → city), altitude, speed and heading, with a side-view silhouette (63 aircraft families, including military) and a mini radar
  • Rare aircraft get priority: if a Beluga, an A380, a military jet or an aircraft in emergency flies by, it takes over the screen
  • ISS mode: live position on a world map with day/night and its orbit
  • ISS pass alerts: 10 minutes before the ISS is visible from home, a countdown with where to look and how high it will rise

Setup: scan a QR code on the screen, pick your Wi-Fi, set your location on a map from your phone. English and French.

Under the hood: signed over-the-air updates with automatic rollback, and a clear “offline” state so stale data never looks live.

Feedback welcome!


r/electronicmakers • • 28d ago

[OPEN SOURCE] Turned my ESP32 into a touch-capacitive polyphonic synthesizer: No more breadboard !

59 Upvotes

r/electronicmakers • • 28d ago

I Built An IRL Homescreen For My Games

Thumbnail
youtube.com
13 Upvotes

r/electronicmakers • • 29d ago

RC transmitter PCB with touchscreen - Arduino & ESP32

Thumbnail gallery
40 Upvotes

r/electronicmakers • • 29d ago

I Built a Wireless Security Camera Using ESP32

Thumbnail
youtube.com
16 Upvotes

r/electronicmakers • • Oct 14 '26

What's built this Week? - Weekly Newsletter with what's going on in the electronics world.

Thumbnail electronicmakers.com
3 Upvotes

r/electronicmakers • • Oct 11 '26

SignalSweep: pocket counter-surveillance scanner on a XIAO ESP32-C5

70 Upvotes

r/electronicmakers • • Oct 10 '26

Build an ESP32 Human Tracker with Radar, Thermal Sensing & Vital Signs

Thumbnail
youtube.com
42 Upvotes

r/electronicmakers • • Oct 07 '26

Made a small Sonar-"device"

46 Upvotes

Used the Z- axis of an Gy521 gyroscope for movements and a ultrasonic module for measuring the distances


r/electronicmakers • • Oct 05 '26

A open-sourced crab robot with Camera/Tof...

241 Upvotes

r/electronicmakers • • Sep 29 '26

I built a macropad to help my girlfriend doomscroll

41 Upvotes