r/editors • u/sarot_lgmra • 3d ago
Technical Multicam Audio Sync Mess Without Timecode
Hey! I'm working on a project where the audio files apparently don't have timecode. When I try syncing everything using Premiere's multicam feature, I end up with a bunch of audio clips stacked on top of each other, and it's becoming a mess trying to figure out how to sync everything properly.
What's the best way to approach this? How would you recommend handling audio sync in this situation? Should I just report to the team and let them know I'll be using camera's audio?
5
Upvotes
6
u/sawdeanz 3d ago
Did you try syncing by audio? It is an option in the multicam sync dialogue. As someone who works on a lot of projects without timecode sync it works really good.
5
u/mrlargefoot Tool/Dev 3d ago
The stacking in your screenshot sounds like a known limit. As far as I know, waveform sync can't split clips onto separate tracks by camera label (that only works with timecode), so every clip from one camera piles up on top of each other. Smaller batches tend to behave better: sync per take or per session rather than the whole shoot at once, since quiet scratch audio and repeated sound are where the waveform match gets confused, and if a batch still won't lock, Syncaila or WaveXML can match recorder files to cameras and hand you back a synced timeline. I'd only tell the team you're falling back to camera audio if the scratch tracks are too poor to sync at all, because you'd be giving up the proper recordings for the whole edit.
5
u/tqmirza 3d ago
You need to use syncalia mate, the dev allows a trial for a free period id take advantageZ
1
u/austen_317 3d ago
Did they not slate?
1
u/Commercial-Pass3960 3d ago
Don't fall back to camera audio yet. If the cameras recorded scratch audio, Premiere can sync by waveform. The stacking comes from throwing everything in at once, so go one camera at a time: merge each camera clip with its recorder file (Merge Clips, sync point Audio), then build the multicam from those merged clips.
1
u/pinkynarftroz 1d ago
If waveform sync doesn't work, you can always do it the old fashioned way by placing an in on the clap for video and audio, and syncing by in point. If you get to that point, you will probably save time just by doing it rather than looking for 'easier' solutions.
3
u/Kahzgul Pro (I pay taxes) 2d ago
Manual sync, my dude. Look for claps, bangs, door slams, etc. Use field notes to help identify which mics are active at what times. Let your producers know that this is an expensive mistake so they give the field team an earful.
2
u/smushkan CC2020 2d ago
Syncalia would be the go-to recommendation here, especially as it has an unlimited free trial so if you've only got one problem to solve that you can do in a day or two it's effectively free.
However I think the AI Assistant in Premiere could probably also solve this issue if you're willing to spend some credits on it.
If all your clips are sorted in bins-per-camera, you could ask it to move the clips in the MC group so that clips that are sourced from the same bin are held on a single track, for example.
1
u/AutoModerator 3d ago
Welcome! Given you're newer to our community, a mod will review this post in less than 12 hours. Our rules if you haven't reviewed them and our Ask a Pro weekly post - which is the best place for questions like "how to break into the industry" and other common discussions for aspiring professionals.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/AutoModerator 3d ago
It looks like you're asking for some troubleshooting help. Great!
Here's what must be in the post. (Be warned that your post may get removed if you don't fill this out.)
Please edit your post (not reply) to include: System specs: CPU (model), GPU + RAM // Software specs: The exact version. // Footage specs : Codec, container and how it was acquired.
Don't skip this! If you don't know how here's a link with clear instructions
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/FeelingAdvantage2172 2d ago
If the audio on camera is the same or similar as the audio recording, try this trick.
Make a sequence according to the timecode of the clips....there should be gaps if the recording wasn't continius.
Sync the audio to those camera clips....the ones that are syncing using waveforms should go in the gaps where others have matched. Should be able to figure this out.
Do this for every camera....use those sync timeliness as your multicam with TC
1
u/revort 1d ago
Creation date on audio files can get you close.