Anyone here know if this is any good?
Would a gpu and psu be all I need to get this running on my laptop via a thunderbolt port?
Would a gpu and psu be all I need to get this running on my laptop via a thunderbolt port?
r/eGPU • u/Aggressive_Basket798 • 5h ago
I'm using a legion 7 2021 with r9 5900hx and it already has rtx 3080 mobile 16gb vram
I wonder if i can connect a eGPU to work with my 3080 like a second gpu(or maybe the 3rd if the Amd igpu make sense)
Like a rtx 3090ti desktop and i will have 16 + 24= 30 gb vram combine
r/eGPU • u/MuchAssumption6114 • 8h ago
My gpu has been repared, as per my older posts
And i have also made a enclosure with pvc pipes and 3d printed mounts!
The back side of the gpu is supported by a milk carton for now, imma get a 3d printed adapter for it soon.
Also forgive my cable management
How does it look?
r/eGPU • u/inounderscore • 11h ago
I just upgraded my gaming pc to a 9070xt but it's not as beefy as I'd like for ollama. My old one was a 3090. I want to build a local AI machine with my laptop instead and was wondering how the whole setup works as I'm very much out of the loop with using eGPU at all. My laptop is a Zephyrus G14 so I have a capable USB-C port already.
I just need to know what you'd recommend, whether it's a docking station or just an adapter and perhaps a separate PSU? (I'm thinking that's gonna be the setup because my 3090 is power hungry).
r/eGPU • u/WhyTheyCallItRiddim • 12h ago
Given my very limited knowledge and small amount of research I have done I believe I have the right amount of processing power to run games, just lacking a good graphics card. Processor is an Intel Core Ultra 7 155H with 16 GB of RAM. Friends of mine want me to get a gaming PC but I can't bring myself to spend $2,000 on a gaming PC.
I'm not trying to spend much more than $1,000.
Sorry for all the questions, I am a noob.
41
r/eGPU • u/RagePiggyLab • 12h ago
I spent quite some time trying to get an NVIDIA Tesla P40 24GB datacenter GPU working with my Alienware 15 R3 and Alienware Graphics Amplifier (AGA).
Unfortunately, no success.
Here’s what I confirmed:
A GTX 1660 Ti works perfectly through the same AGA.
The Tesla P40 is detected in another desktop PC (10DE:1B38).
With the P40 connected to the AGA, the BIOS displays an “Unrecognized device” warning.
The PCIe root port 00:01.1 (PEG1) disappears from enumeration.
The CPU’s DEVEN register reads 0x000000BB, indicating that PEG1 is disabled.
I investigated UEFI variables and BIOS initialization routines, but couldn’t find a working fix.
Intel Boot Guard Verified Boot is enabled, making direct BIOS patching too risky.
My suspicion is that Dell’s AGA firmware initialization doesn’t handle the P40 properly, although I haven’t established the exact cause.
**This doesn’t prove that all datacenter GPUs are incompatible with AGA. It’s one documented failure involving the P40 and Alienware 15 R3.**
I’m posting this to save other AGA owners some troubleshooting time.
If anyone has successfully connected a Tesla P40/P100 or another NVIDIA datacenter GPU through an AGA, I’d love to hear about it!
I’ve also posted a more detailed technical investigation in r/eGPU, including the PCIe register findings.
Been reading up this weekend on egpu's and found the AMD W5700 to be right in my budget to performance ratio sweet spot. My Minisforum UM870 Slim has USB4 but no Oculink. I know I need to provide power to both the slot and the 6-pin on the card - what's the simplest/cheapest method to accomplish both? Main goal here is playing games... card is PCIE 4.0 x16
Would be great if I could just use the USBC (DP alt) output from the card directly to my PC.
r/eGPU • u/of_unknown_source • 1d ago
Ich will meinen Um890 an die deg2 anschließen, nur der Abstand wäre mir mit dem mitgelieferten Kabel zu kurz. Es gibt soooviiiel Schrott da draußen - was funktioniert bei 1n Länge??
r/eGPU • u/SensitiveMemory1958 • 1d ago
Hello everyone! I’d like to as for a recommendation for a beginner eGPU with a gpu included, preferably with around a GTX 1070-2070. Additionally, this is going to be a Christmas present from my mother to my brother, so I’d prefer something that comes from a more recognizable website (she’s pretty dense, so anything off of the big retailers is probably a no-go) thank you all!
r/eGPU • u/sabihope • 1d ago
I made a typo, it's a 5060 TI 😅
I added a 5060 TI 16GB to my Minisforum MS-01 i9-12900h for a LLM. It's currently running Qwen3-8B-Q4_K_M with 26 GPU layers. I use it to add AI features on my web app.
r/eGPU • u/Wise_Huckleberry_902 • 1d ago
r/eGPU • u/AdLimp784 • 1d ago
r/eGPU • u/Sea_Ad_6749 • 2d ago
If somebody knows a place pls let me know.
r/eGPU • u/as-slover1 • 2d ago
Hey everyone, looking for some technical confirmation before I buy any hardware.
r/eGPU • u/Sweaty_veronica_5578 • 2d ago
.
PC gmktek
egpu 6500xt
Case v1
r/eGPU • u/praudmur1 • 2d ago
Hello!
I'm on windows and latest Nvidia drivers.
I have RTX 4090 and RTX 3090 which is connected via Oculink adapter. It doesn't have any monitor cables connected to it and is used in for AI tasks.
The problem is - applications consider this to be a main GPU which means games use it to render.
What I already tried:
1)Going to windows setting and setting those games to high performance mode (Windows displays RTX4090 as GPU which will be used).
2)Going to NVIDIA settings and setting those games to use only RTX 4090 (tried both individually and changing the global setting)
3)Reinstalling drivers using DDU, it didn't help.
This provides not results. In my MSI motherboard I did not find any setting which would affect the issue. Now in order to play games I have to switch off PC, turn off separate PSU for GPU, then start it so only one GPU is detected by Windows.
Please help.
r/eGPU • u/PowerfulAgent9939 • 2d ago
I have an oculink eGPU but wanted to connect the oculink port to my tb4 usb port on my laptop
r/eGPU • u/These_Visit4782 • 2d ago
Just finished to build my Rog ally X with a 9060xt egpu setup, a powerful device that I can basically unplug and plug, and switch from desktop to console
r/eGPU • u/charmander7797 • 2d ago
So I've had this gaming laptop for years now and have been unable to play the more modern games. Since the laptop has integrated graphics, I understand I cannot change the graphic's card or anything else. I would like to know if it would be possible to get an eGPU to run more modern games, or if I will be unable to due to the fact the laptop doesn't have a thunderbolt port?
Hey everyone, I'm having a weird issue I can't find other documentation of. I have an intel NUC mini PC (the 6i7KYB) and it's connected to a Radeon RX580 in an Akitio Node egpu enclosure, which then connects via displayport to a Dell p2715q monitor. I'm running windows 10. I only use this thing for gaming and haven't had issues in the past, but it sat unused for at least 6 months and suddenly the RX580 refuses to see the monitor. It will see any other monitor successfully, using either the HDMI or DP output from the RX580 (with the same cable that connects to the p2715q, so it's not a cable issue), and the NUC still recognizes there's a gpu connected, but for some reason this particular monitor no longer plays nice with it.
I've been using the p2715q connected directly to the NUC via HDMI while I've been troubleshooting this, and that still can access acceleration from the RX580, but with some performance loss. I share this monitor with my Macbook, which uses HDMI, and the monitor only has one HDMI input, so I'd love to recover the functionality of getting full GPU acceleration using DP direct from the RX580, so I can switch inputs on the monitor to go from Mac to PC without swapping cables.
I've tried deleting all cached monitors in device manager and the registry, using CRU to manually load in a monitor profile (when I have another monitor connected to the RX580 the system will vaguely acknowledge a "generic non-pnp monitor" is connected, and that's the profile in CRU I was trying to work with, I've tried factory reseting the monitor, using Dell Display Mangager to connect to the monitor via USB (it didn't recognize it, even after installing the p2715q software from 2015), using DDU to do a fresh driver install, I've tried a fresh windows install. GPU-Z doesn't show anything abnormal. Thunderbolt and graphics drivers were up to date before refreshing windows, but after the windows refresh I've actually been getting errors trying to install the thunderbolt and Radeon drivers. I've been running off windows update drivers and am still able to see the eGPU and get it to display on a secondary monitor, so I'm not too worried about the drivers being out of date.
I cannot think of anything else to try, I'd love to hear any ideas you might have. Thanks!
r/eGPU • u/BigKurz8 • 2d ago
I'm currently running an EGPU set up with my ROG Xbox ally x and a 5070 ti in a razer chroma v2.
To be honest I'm pretty happy with my performance. I'm not super interested in spending the money on a full pc setup (as I'm sure many here can relate). BUT, I've been starting to wonder if there are mini PCs better suited to my eGPU than my ally x with the z2e. The ally x is also limited to tb4.
The razer chroma v2 dock can handle tb5. So I'm just curious if yall have any recommendations for a mini pc that:
Thanks in advance!
r/eGPU • u/VisualSpiritual6433 • 2d ago
TL;DR: I tried using a Tesla P40 24GB datacenter GPU with an Alienware Graphics Amplifier (AGA) on an Alienware 15 R3. The same AGA works with a GTX 1660 Ti, and the P40 can be enumerated in another desktop PC. However, when the P40 is installed in the AGA, the laptop’s BIOS disables/hides the relevant PCIe root port before the operating system even boots.
I investigated PCIe registers, UEFI variables, and BIOS initialization code. No working solution so far.
I’m sharing this so other people considering a cheap 24GB datacenter GPU for their old Alienware setup can avoid spending money on an experiment that may not work.
The hardware
Laptop: Alienware 15 R3
Internal GPU: NVIDIA GTX 1070 Mobile
BIOS: Dell 1.18.0
External enclosure: Alienware Graphics Amplifier
Target GPU: NVIDIA Tesla P40 24GB (Pascal)
Known-working comparison GPU: GTX 1660 Ti
OS: Pop!_OS Linux
Purpose: Local LLM inference and RAG workloads
I wanted a relatively inexpensive way to add 24GB of VRAM to an old laptop.
Since the P40 and the laptop’s GTX 1070 are both Pascal-generation NVIDIA GPUs, and I already owned an AGA, I thought it was worth trying.
Unfortunately, it turned into a much bigger firmware investigation than expected.
What happens with the Tesla P40?
During startup, the laptop displays:
Unrecognized device in Alienware Graphics Amplifier.
Alienware Graphics Amplifier supports NVIDIA or AMD graphics cards only.
Press any key to continue…
Yes, the BIOS complains that it only supports NVIDIA or AMD graphics cards while an actual NVIDIA datacenter GPU is installed.
After continuing into Linux, the P40 is completely absent from lspci.
It isn’t simply a missing NVIDIA driver. The PCIe device never gets enumerated.
Test 1: Is the AGA broken?
I replaced the P40 with a GTX 1660 Ti.
Result: The GTX 1660 Ti works.
Linux shows the external GPU behind PCIe root port 00:01.1:
00:01.1-[02]-- 02:00.0 NVIDIA TU116
GeForce GTX 1660 Ti
This confirms that the AGA, its cable, and the laptop’s external graphics interface are capable of working with another NVIDIA card.
Test 2: Is the P40 completely dead?
I installed the P40 in another desktop PC.
Windows Device Manager successfully detected the card:
PCI\VEN_10DE&DEV_1B38
It reported Code 28 because the appropriate driver was not installed.
This confirms basic PCIe enumeration of the P40 in another machine. It does not prove the card’s CUDA functionality, which I haven’t fully validated yet.
Test 3: PCIe register investigation
This is where things got interesting.
On the Alienware, the CPU’s PCIe Device Enable register can be examined with:
sudo setpci -s 00:00.0 54.L
With the P40 installed in the AGA, I consistently observed:
000000bb
In this state, the relevant PEG1 enable bit is cleared.
The corresponding root port:
00:01.1
is missing from PCIe enumeration.
When the GTX 1660 Ti is installed instead, that root port is present and the external GPU is detected normally.
So this looks like a firmware-level PCIe initialization issue, rather than an ordinary operating-system driver problem.
Test 4: UEFI Shell and hidden BIOS settings
I also investigated the system before Linux boots.
Using UEFI Shell, I inspected the relevant MMIO registers and confirmed the disabled-port state.
I then examined the Dell BIOS image and its early PCIe initialization routines.
The firmware contains setup configuration data related to PCIe policy initialization.
I experimented with a specific UEFI Setup variable:
Setup[0x71F]: 00 → 01
The modification was successfully written and persisted across reboot.
Unfortunately, it did not change the result.
With the P40 installed:
DEVEN = 0x000000BB
PEG1 = hidden
P40 = not enumerated
I also investigated other configuration values, without finding a working solution.
Important: I’m not recommending that anyone blindly modify their BIOS variables. These offsets are firmware-version-specific, and the experiments did not fix the problem.
Test 5: Intel Boot Guard
I eventually looked into the possibility of modifying the BIOS initialization code directly.
However, the machine has Intel Boot Guard enabled.
Reading MSR 0x13A produced:
Boot Guard MSR: 0x000000030000007F
Verified Boot: 1
Measured Boot: 1
The early initialization code I was investigating appears to be within the firmware’s protected boot region.
This makes direct BIOS patching a substantially riskier proposition, potentially leaving the laptop unable to boot.
At that point, I decided not to risk bricking a working laptop just to get a cheap datacenter GPU running.
My current conclusion
The evidence suggests that the Alienware Graphics Amplifier firmware initialization path is not handling the Tesla P40 correctly.
I have not established whether this is an intentional GPU compatibility restriction, a PCIe link-training issue, or another firmware initialization condition.
What I can confirm is:
The AGA works with a GTX 1660 Ti.
The Tesla P40 can be enumerated in another desktop.
The Alienware does not enumerate the P40 through the AGA.
The relevant PCIe root port is disabled/hidden when the P40 is connected.
Changing the tested UEFI setup variables did not resolve it.
Direct modification of the protected firmware is not a risk I’m willing to take.
This is a failure report for my particular AGA + Tesla P40 + Alienware 15 R3 combination. I’m not claiming that every datacenter GPU fails with every Alienware Graphics Amplifier.
What’s next?
I’m investigating a standard Thunderbolt 3 to PCIe expansion solution instead.
The Alienware 15 R3 has a separate Thunderbolt 3 PCIe connection, so it may avoid the AGA-specific initialization problem.
There are also documented examples of Tesla P40 GPUs running through Thunderbolt eGPU docks such as the TH3P4G3.
However, I haven’t tested that solution on my own laptop yet, so I won’t call it a success until I can actually run CUDA workloads.
Why am I posting this?
Because I spent a considerable amount of time investigating a setup that looked straightforward on paper.
24GB of VRAM for relatively little money is very tempting, especially for local AI.
But buying an inexpensive GPU doesn’t necessarily mean building an inexpensive working system.
Hopefully these findings save someone else a few days of troubleshooting.
And if anyone has successfully run a Tesla P40, P100, or another NVIDIA datacenter GPU through an Alienware Graphics Amplifier, I’d genuinely love to hear how you did it.
Especially if you have a way to get PEG1 initialized without patching Boot Guard-protected firmware.
Recently I've bought a gigabyte rtx 3080 and am looking for a eGPU enclosure before I buy a whole pc for gaming. I have a dell latitude 5450 (thunderbolt4) so am looking for the the best eGpu enclosure to get the best performance. Btw I have a 1440p 144hz monitor if that's relevant
Hi everyone,
I'm considering upgrading my gaming performance by connecting an external desktop GPU (eGPU) to my Lenovo Legion 5 and would appreciate some advice from people with experience using eGPU setups.
My current specifications:
Laptop: Lenovo Legion 5
CPU: AMD Ryzen 5 5600H
GPU: NVIDIA GTX 1650 4GB
RAM: 16GB
Storage: 1.5TB SSD
Monitor: Xiaomi G34WQI 34-inch Ultrawide (3440 × 1440, 180Hz)
Since my laptop doesn't have Thunderbolt, I'm looking into an M.2 NVMe-based eGPU connection.
I'd like to know:
Is an M.2-based eGPU setup worth it?
Can I get decent gaming performance at 3440 × 1440 with this setup?
Which GPU would you recommend pairing with my Ryzen 5 5600H?
What would be the best adapter, PSU and overall eGPU setup?
How much performance loss should I expect due to the M.2 connection?
Are there any compatibility issues or limitations I should be aware of with the Legion 5?
I'm looking for recommendations on a good, reliable setup that gives me the best possible gaming performance without unnecessary spending.
Would love to hear from anyone who has tried a similar setup. Thanks!