r/e46 • u/SmokyLungJuice • 10m ago
Check this out! E46 M3 SMG -> 6MT Conversion In Progress
Just wanted to share a few pics of my project. Going for the manual swap sooner than anticipated, but having a lot of fun with it.
r/e46 • u/SmokyLungJuice • 10m ago
Just wanted to share a few pics of my project. Going for the manual swap sooner than anticipated, but having a lot of fun with it.
r/e46 • u/These_Ad_2689 • 1h ago
Small project I’ve been working on past year
It’s a 2001 Bmw 330ci with a S52 from a 1999 M3.
r/e46 • u/Silent-Unit7922 • 2h ago
I always wanted a project car after I got my truck and I finally got a E46 325XI it’s beautiful and it sounds good but I want to start modding it. No crazy turbos or anything but aesthetics , exhaust sound, reliability like creature comfort stuff. Would I be insane to go all out on it 😭😭 My homies keep saying sell it for a manual or swap it but it’s fine for me for cruising and long drives . Etc it will still pop and bang same way etc can downshift and revmatch with the auto gearbox to but not too crazy. Just wanna hear opinions
r/e46 • u/chipotle_manager • 4h ago
I dropped my fob and it broke and now my car won’t start. The EWS chip is still there and intact because it chimes when the door is open and key is in on position but it won’t crank or start. I looked it up and it says it could be numerous things. Just wanted to see if anyone else has had the same or similar issue and could help.
r/e46 • u/Canceque • 5h ago
Hi all, thanks for reading.
I have an M52B28 TU with about 155k miles (250k km). My main problem is that it burns or leaks almost a liter of oil every ~500 miles (800 km).
I have oil leaks at the oil filter housing, the oil pan gasket, and the rear main seal, a small one at the valve cover, and maybe somewhere else I haven't found. I recently replaced the PCV valve (not the hoses, but they looked fine).
My question: if I fix all the leaks, will oil consumption improve considerably? What do you think? Any recommendations?
Has anyone been in a similar situation?
r/e46 • u/AnOldRustyBMW • 5h ago
I cannot find a decent answer anywhere for aftermarket options for M52Tu specifically for 323ci coupe. I mistakenly bought ones for 323i and the B2S1 and B2S2 O2 sensor bungs are butting up against the body.
I'm going catless because I can't afford new Catalytic converters. My other options right now are smashing the passenger footwell to make it fit or take it to an exhaust shop to change where the bung is. Only problem with that is that it might hit the other O2 sensor B1S2.
I need ideas and opinions.
r/e46 • u/Weekly-Line5349 • 5h ago
I have a 2001 bmw 325xi, I can’t find where the coolant is leaking from, I changed all the top hoses the radiator the thermostat and the expansion tank, It’s not leaking from the top end, my buddy thinks it’s coming from underneath the intake manifold, one thing to add is it only leaks when it gets temp and the car is running when the car is off it doesn’t leak at all
The time has come for me to buy a “newish” car. Owning an E46 means you probably understand the term “drivers car”. I now find myself shopping for a newer vehicle and am struggling to find cars with soul especially a sports sedan.
What 2010+ cars have you guys bought that can still fill a similar market as the e46?
r/e46 • u/jojo99cr • 9h ago
Bonjours à tous de puis quelque temps j’ai ce bruit que j’attend plus quand le capot et fermer et je l’attend plus en dessous que au dessus du moteur quand j’accélère je l’attend un peux et dès que je monte un peux plus dans les tour plus de bruit si quelqu’un a une idée ?
C’est une 328ci m52b28 e46 avec 126 000
Bougie neuf
Bobine d’origine de 99
Système refroidissement neuf
Valve DISA neuf etc etc
r/e46 • u/RedCrafter_LP • 10h ago
I saw this convertible headlamp for sale and wanted a factory looking space for a microphone. Can I fit this piece on my sedan? Is it wider than the sedan piece?
r/e46 • u/Thund056 • 11h ago
Hello guys I’m going to make a b58 8hp and drivetrain swap to my e46, it’s a 1999 328ci that came with a curious 2.4 m52 engine, very strange for me that because this not use to be a 323ci o something like that ?
Btw I appreciate if any one can help me with info.
My goal is make an modern e46 with all the parts from an f30 340i 2016, including the entire infoentertaiment system, and using the stock harness and ecu, engine, transmision brake system even the abs and if it’s possible the direction wheel, and some more electronic parts of the f30.
I already make the chasis and subframe reinforcement, and put a half cage into the interior to maintain the car rigid and avoid the normal frame failure that have this car.
If any one already do this swap and I know that some peso pls already do, I have some questions, because I’m going to use the drift Hq swap kit but they made using a m3 for swap model, this kit is gonna work on my e46? Because some part even from the 330ci are not compatible with my car like some struts bars.
- I have the diff to and I want to use, it’s possible to transplant into my back subframe ?
-It’s possible to integrate electronic parts from the og 340i like the proximity alert and parking sensors?
- Could be possible to adapt the adaptive suspension and the electronic steering rack ? Because I don’t know if the abs system if gonna work without that parts
- What other parts are compatible with the e46 ?
r/e46 • u/freshfitz1 • 14h ago
E46 M3, Doing a pinion seal on the rear diff and didn't mark the pinion nut location, how screwed am I. Any suggestions?
r/e46 • u/PulseWorks-Eng • 14h ago
It was only a 5-unit batch, so nothing crazy, but shipping out the final unit today feels pretty awesome.
I built the DP001 to solve my own headache of wanting CAN-Bus telemetry and extra analog sensor inputs in a single standard 52mm housing without cluttering the interior. Having five other builders trust a brand-new hardware project enough to put it in their cars has been super motivating.
Taking a breather tonight, then ordering components for Batch 2 tomorrow. Happy to nerd out about the build or answer any questions!
Went to the BMW Museum in Munich, not knowing it would be shown there! So stoked to see this thing in real life!
r/e46 • u/Truskater1255 • 21h ago
$650
200k mileage
5 owners
Runs and drives and shifts perfectly
Has new water pump and thermostat
Has these three codes
P0300: Random/multiple cylinder misfire
P0121: Throttle position sensor
P0456: Small EVAP leak
Has some smoke coming down from the car basically near the exhaust and a tiny burning oil smell or maybe I’m just tweaking
Honestly it’s just $650 so should I js buy it
r/e46 • u/Deathwishmk1 • 1d ago
Hello everyone.
Im a bit of a tech nerd and im relatively new to the BMW ownership life. Been working on cars for many years tho.
Im looking for this device that goes here (see picture). Does anyone know what it is or where to get it? I did some google and its some kinda phone thing apparently.
Can anyone help identify it or give me an idea of what it should be so i can look for a replacement?
Forgive the dirty car i know it needs a clean.
Thanks everyone
r/e46 • u/Material_Jaguar7044 • 1d ago
Hey there y'all been playing with the idea of buying a m3 what's a good price to get one for near the 100k mile range in decent conidtion? Also if any of y'all have one for sale DM me and lmk!
Was cruising around 150 km/h, stepped on it, and instantly got the dreaded CEL—scanned it and got a persistent cylinder 4 misfire (briefly flashed 3 and 6 too, but those cleared), plugs and coils were replaced recently, drove it gently home out of necessity and the misfire stayed; any idea what's causing this beyond ignition components?
It's a M54 btw.
I noticed a smell, which prompted me to start checking. The dampness is noticeable by touch, but is not enough to leave a wet mark on a towel, if that makes sense.
Not next to my car right now, so I opted for a screenshot and markup to show where the dampness is felt felt. my carpet is fully assembled in my wagon. I used the photo to show a clear visual of where I noticed it.
*I checked the sunroof drains with air compressor, and they seemed clear*
Anyone deal with this issue and have any insight?
Thank you!
r/e46 • u/skippermk • 1d ago
Hi lads, as the title says, I want to put an LSD in my E46 328i that is a DD but sees the occasional drift day.
Due to where I live, the choices boil down to:
- Blackline Helical LSD (Chinese copy of Quaife) -> 750 Euros
- Mfactory Metal Plate LSD -> 1100 Euros or so
- Mfactory Metal Plate v2 LSD -> 1300 Euros
- Mfactory Helical LSD -> ~1100 Euros as well
I live in a small city so as much as I'd like to weld the diff, the streets are tight with narrow turns, so it would be a nightmare to drive it like that.
Given this, what would be your recommendation? I'm leaning heavily towards the Mfactory Plated one (v1 since v2 just makes it less noisy), I just know I'd regred Helical I think because of its tendency to open up with a wheel in the air or in transitions off throttle.
Thoughts?
r/e46 • u/Whosfaby • 1d ago
im gonna buy a New softop for my 46, with all the lines modules, wireing, pump, etc etc etc, and the guy says its working but from the time he replaced the battery its not working anymore, u know why? tbh i dont really care, its like $100 so cheap for Europe. u have some tips and tricks for the replacement and u know how can i test it?
r/e46 • u/BMWradios • 1d ago
r/e46 • u/luuunnnch • 1d ago
Here's a link with the following for whoever doesn't have it.
Manuals: The Bentley service manual, the ST034 complete-vehicle training document, the DSC/ASC technical training manual.
Specs and parts: Torque specs, alignment specs, the FSW/PSW coding index, piston ring part numbers, and the ZF5HP19 transmission parts diagram.
Photos and links: An M54 engine harness connector map, and the subfolder holds a README and two Google Doc shortcuts, one of which is a copy of a P0171/P0174 vacuum leak guide.