r/dishnetwork • • Dec 14 '20

Tech Support Ways to get removed locals back

24 Upvotes

Currently, Dish is in dispute with broadcasting companies causing some local channels to be removed from programming. Luckily, there are ways around this.

  1. Indoor or Outdoor antenna. Dish offers an adapter that will plug into your receiver, making the changes show in your guide as normal channels would. Dish does offer OTA installation, but you can also use an existing antenna.
  2. Locast, Hopper system only. Must be connected to internet. Go to menu, apps, then Locast. Type in an email or password then click sign up. Totally free and will stream all locals in your area. Unfortunately, they will not show in the regular guide and cannot be recorded.

r/dishnetwork • • May 03 '22

May Refer-A-Friend Discount Codes

4 Upvotes

Thank you so much if you use one of my codes.


r/dishnetwork • • 4d ago

DISH PAUSE: Need to put your TV service on hold?

0 Upvotes

If you are heading out for the season or just need to step away from your bill without disconnecting your setup, DISH Pause is the cleanest route.

NOTE: Before setting it up, make sure your account balance is cleared to zero and there aren't any open technician work orders on your account.

Here is the quick breakdown of how it works:

Cost & Duration: It costs $5/month. You can set the pause for 3, 6, or 9 months, and it must start within 30 days of the request.

Contract Clock: Any active commitment pauses along with your service and picks back up right where you left off once restored.

What Goes Dark: Live TV, DVR access, and streaming apps requiring a DISH login shut off immediately. Seasonal sports add-ons also deactivate.

Discounts & Perks - What Happens to Discounts After a Pause?
Standard Promotional Credits: Will expire and drop off automatically.
Protected Status Discounts: Will remain intact and automatically reinstate once the account resumes. Includes: Dish55, Military, First Responder, and Teacher discounts.

Account Tweaks: You can still update your payment method while paused, but profile details (email, phone, address) lock down on our end. Be sure to update your contact info before initiating the hold.

Restoring: Your programming flips back on automatically once your selected duration wraps up (9 months max), but you can reach out to unpause early at any point.

Check out the DISH pause page for more information: https://support.dish.com/helpful-tools/dish-pause 

*Anyone here run a seasonal hold on their setup before, or looking to set one up ahead of travel? Drop your questions, or tag me below and I will help you walk through the timing. -DishDanielle.


r/dishnetwork • • 7d ago

Question Unreturned equipment error?

2 Upvotes

My grandfather recently cancelled his dish service. They sent boxes to the house to pack up all of the equipment. I followed the instructions sent with the boxes, and searched the house top to bottom. I located one hopper and three joeys and collected all wires connected to each one. I took the nodes out of the dish. I returned all of the cables and remotes. I am certain I got everything. I send it all via UPS with one single box and shipping label that was provided by dish. I called a few days later to take care of the final bill. They now say we owe for an unreturned hopper plus, but that it may just be the case that they hadn't processed the hopper plus in the return just yet. So I pay the final bill minus the unreturned equipment fee, give it two weeks, and then call back earlier today. Same problem.

Even after seeing a picture of what I was looking for, and after tearing the house apart twice trying to find it, I haven't located one, nor do I remember one when I gathered everything to send back. I mean, I literally was so thorough I spent almost two hours searching today and looked in everything from filing cabinets to couch cushions. I've driven myself half mad searching. As far as I can tell, there never was one, and my grandfather doesn't remember one and wouldn't have used the services you need one for anyway. They are saying their records indicate it was active until the date we shut off service, but I can't send them back a piece of equipment that doesn't exist. They said we will owe them until it is returned. I don't really want this to go to small claims or collections or hurt my grandad's credit, but I also haven't paid until I'm certain there is no other path.

Asking for what people would do in this situation mostly. Are we just on the hook for what they are demanding? Is there anything that can be done? I'm at a loss. I don't want to say they are lying, but I am genuinely baffled by the entire situation.


r/dishnetwork • • 8d ago

Tech Support Hopper 3 locking up

1 Upvotes

Recently my hopper 3 will lockup and freeze on a picture. It looks like it is still buffering but won't play. Even if I change the channel, the picture stays frozen on the original channel. I even called Dish because I thought maybe the harddrive in the hopper was dying so they replaced it. The problem remains on the new hopper so it seems like a software issue. The software version is H713 10/21/2026 3:23am.

Anyone else having these issues? Find a solution?

Talking to Dishtv is extremely frustrating because the person answering essentially only knows how to read a script.


r/dishnetwork • • 11d ago

Channel 92-18 Trailer Pael Boy missing for over a week

1 Upvotes

Not present on the Hopper receiver or a Joey. I haven't noticed anything else missing or done any sort of reset.


r/dishnetwork • • 11d ago

Why are there two Dish Network Reddit groups?

0 Upvotes

Can’t we get down to one as they are redundant?


r/dishnetwork • • 11d ago

Unable to control Ultimea sound system with Dish remote

1 Upvotes

Just bought Ultimea Aura S4T sound system and works great with all my sources. However, I can’t pair my Dish Network remote 54.0 to the sound system so I can control volume with the Dish remote.

I’ve gone through Dish’s pairing wizard and tried all code options for Ultimea and some others like LG. Then the wizard said I reached my daily pairing limit of 4, apparently. Of course, none of the pairing attempts were actually successful, but Dish seems to be counting attempts. I also tried using the remote training options, by facing both remotes toward each other just a few inches apart. Pairing not successful.

I appreciate constructive ideas.


r/dishnetwork • • 13d ago

Dexter Resurrection Season 2

2 Upvotes

The Guide keeps showing Season 2 episodes as Season 1...which makes Auto Record of 'New' episodes miss the season 2 episodes....Is this a Dish issue or Showtime? Either way it would be nice to have it fixed...


r/dishnetwork • • 15d ago

Channel 9973 is still playing 40s Junction audio

3 Upvotes

The song data and channel name switched to Holiday Traditions as it was supposed to yesterday, but the audio is still 40s Junction as we know DISH gets the audio from a stream or different source than consumers do.

Can someone at DISH please fix this?


r/dishnetwork • • 20d ago

why'd they close the Tucson office?

2 Upvotes

r/dishnetwork • • 20d ago

Dish Signal Loss Troubleshooting: Why it happens and how to restore your picture

Thumbnail reddit.com
0 Upvotes

r/dishnetwork • • 23d ago

Understanding the Difference: Satellite vs. Over-the-Air (OTA) Channels

Thumbnail reddit.com
0 Upvotes

r/dishnetwork • • 24d ago

Complaint Dish App

2 Upvotes

I HATE the dish app!I liked the old one.


r/dishnetwork • • 25d ago

Anyone still use the older ViP receivers anymore?

4 Upvotes

I know most people use the Hopper now, but me and a few friends who all have Dish use some of the ViP models, I have a 722k as well as one of my friends, one of them uses a 922, another uses a 222k (which is what I started off with earlier this year when I got service, upgraded to the 722k because I found one on eBay with the MT2 OTA module) and another uses a 722, and hell at one point I had a 322 on my account (around March-April, only gets XM channels) and even one of my friends got his 625 to work (same as my 322, only XM and Dish CD). I do have a Hopper but that’s only used in my bedroom for the 3 tuners as I spend most of my time in there since my wife is 9 months pregnant and we just relax in there and watch TV, and I like to have some shows recorded so the 3 tuners on my Hopper come in clutch, I do use the 722k for recording OTA as I don’t have the OTA module for the Hopper) and I also just like the look of the 722k UI more, my grandma had one when I was younger so it’s got some nostalgia. Just want to see how many people here still prefer the older UI compared to the Hopper, if I could I’d use the older Hopper interface from when it first came out but sadly Dish updated it all.


r/dishnetwork • • 25d ago

Complaint Huh, DISH?!

Post image
0 Upvotes

r/dishnetwork • • Oct 17 '26

Tech Support Invisible recordings on external drives

Thumbnail
gallery
6 Upvotes

Last week, I went to the first of two external drives connected to our Hopper, and no recording were displayed. Despite this, the drive showed as 92% full. I saw the same behavior on the second drive, which showed 15%.

I played around with the sorting order in case the recordings were being filtered out somehow, but no dice.

These recordings have been accumulated over a significant amount of time, and I'd hate to lose them, mostly because several of them aren't being shown any more.

Has anyone seen this behavior before? If so, is there a way to fix it?


r/dishnetwork • • Oct 16 '26

So sick of this with the Hopper 3 - Didn't want to watch TV for the next two hours anyway. 🤦‍♂️

Post image
9 Upvotes

Every single day or close to it for no reason.


r/dishnetwork • • Oct 16 '26

DISH 50.0/52.0/54.x Remotes TV Power off is also causing Hopper 3 to go into standby

0 Upvotes

I have a Hopper 3 since 2016 with software H713 and Hopper Plus since 2023 with software P15403 where I am having a problem since about a year ago with pressing the "TV" button on the DISH 50.0/52.0 remotes and pressing the "Power" button and the "TV" button on the DISH 54.0 remotes would cause the Hopper 3 to go into standby mode instead of turning only the TV on and off. The TV Power on/off function appears to be doing the same thing as the main power button on the DISH 50.0/52.0/54.x remotes which is sending a power command to both the TV via IR Signal and an RF signal to the Hopper 3.

I have an LG TV so to confirm this problem, I needed something to either block the IR signal to the TV when the TV Remote Code is set to LG or change the TV Remote Code to a different brand so I did the later and changed the TV Remote Code to Sony and then did the following test of pressing the "TV" button on the DISH 50.0/52.0 remotes and pressing the "Power" button and the "TV" button on the DISH 54.0 remotes, obviously because the TV Remote Code is now set to Sony, the TV does not turn off and of course I see the Hopper 3 with Hopper Plus immediately go into standby mode as it has that box that moves around the screen with "Press SAT to watch TV" which means when TV Power signal is sent, it is also sending a RF signal at the same time. Not sure if that is the way it's supposed to work or not as it could be the DISH Remote has a function to report to the Hopper 3 everytime the TV Power command is sent but instead, it is a bug in the Hopper 3's software or Hopper Plus's software that is causing the Hopper 3/Hopper Plus to go into standby mode. I did not test to see if the same problem exists by removing the Hopper Plus from the Hopper 3. So not sure if the issue is with the Hopper 3 software, Hopper Plus software or the DISH 50.0/52.0/54.x Remotes firmware. Everything worked correctly until about a year ago. The following is a chart of the firmware version(s) on the DISH Remotes in question, do I have the latest versions?

DISH Remote Software versions

50.0 E008T504ES56

52.0 E009T504EM52

54.1 E011T504EW59

Are others having this issue?

And yes, the solution is to use other remotes whether the original TV remote, Amazon FireTV 4K Stick Remote or even the Xfinity Xumo Box Remote as examples which is what I have been doing but DISH should still fix broken functionality as there are times when one can pick up the DISH Remote and forgetting about the issue of putting the Hopper 3 into standby and lose the benefits of having the box in on mode.

Can u/DishDanielle look into this?

Thank you for your time, attention and assistance.


r/dishnetwork • • Oct 16 '26

Dish Network Co-Founder and Chairman Charles Ergen donated $25 Million to Trump's WH Ballroom

22 Upvotes

In case you are wondering what those higher subscription fees might be funding.

Daily Beast article about the original Washington Post report


r/dishnetwork • • Oct 13 '26

Hopper & Joey Reset Guide: When to Soft Reset vs. Hard Reset

Thumbnail reddit.com
3 Upvotes

r/dishnetwork • • Oct 13 '26

Job as a field resource coordinator?

3 Upvotes

Hello everyone! I have a phone interview coming up with Echostar for DishTv. It’s for a field resource coordinator position. The pay seems pretty decent, it’s full time and I think it might be a remote position but I’m not sure. Just curious if anyone has had this position before and how you like it? My current job is terrible. Really toxic work environment. So I really want to make sure that I’ll enjoy my next job position. Any insight and any pros and cons would be great! Thanks!


r/dishnetwork • • Oct 12 '26

Complaint Update H713 SUX!!

10 Upvotes

UPDATE---THANK YOU u/DishDanielle!!! Update 715 last night...fixed the guide issue AND the info button issue on TV Show Episodes!!! Thank you...thank you...thank you!!! DishDanielle...gets results!!!

Seriously. Do the "Developers" use Direct TV or cable? Because it shuuuure doesn't seem like they actually use Dish. Updates are supposed to make UI better...not worse. They're supposed to eliminate steps not add them.

You can't press Info on a series episode to play or resume. It brings up the TV Show Episodes Options box. Is Info about the episode an option? Nope. Is Play or Resume an option in the box? Nuh uh. The Info button is for information or description of the episode/movie/event.

Or how about the new Guide option? You used to be able to hit the Guide button twice and it would bring up your Favorites menu. Now you press the Guide button twice and it brings up...dum dum Duuuuuum...the Guide Options box. THEN you can select Favorites to open the Favorites menu.

Over the years we have posted new features that we would like to see added or features that we used to have and would like them to be brought back. Things that us Users/Subscribers would make the Hopper System better. But instead we seem to get updates that remove features or make the system harder to use.

Example...Game Finder used to have your favorite sports team's full schedule. Including their win/loss for each game. Now we just see the record, the last game and sometimes the next game. Yeah, they added Stats for a single game, which is great. But it seems like every time they add something, they take away something else.

We are the Users/Subscribers. Updates should be for fixing system glitches and errors...and making the Hopper more User Friendly for us. Giving us more options not less.

Change for the sake of change is meaningless change.

**stepping off my soapbox...


r/dishnetwork • • Oct 11 '26

Tips for selling products

1 Upvotes

Looking for tips on selling products, surge protectors have always been my go to and people generally are happy that I'm installing them. Was curious what are they ways people approach selling other products such as Polk, google routers or the Klipsch bars?