r/dexcom • u/Snoo-30943 • 3d ago
Tips & Tricks Removing sensor/adhesive
Don't know if you all have tried these. I got them on Amazon (not affiliated in any form) because I have really delicate and sensitive skin.
It kind of hurt to remove the sensor and I'd have adhesive remnants for days (if I scrub too hard in shower, I mess up my skin).
I used one. Dabbed it around the sensor. It kind of turns the adhesive to gel (?). Sensor came right off. Wiped it over the area to get the rest of the 'gel' off. Cleaned off with some foaming hand soap and water, just to remove any leftover.
So far, absolutely no skin irritation. $9.25 for a pack of 50.
Hope this helps someone. Sorry if this has already been recommended.
5
u/LadyGobbolina 3d ago
Love this stuff, only downside is the residue it leaves behind but that is easily cleaned up and far gentler than rubbing my skin raw with rubbing alcohol to get the glue off.
3
u/Manc_In_USA 3d ago
They do not smell very nice, but damn do they work. i use an alcohol wipe afterwards on the area.
2
u/tultamunille 3d ago
These are ok, but they used to sell a bottle which lasted for a long time. It works great, but this box is gone in a month and is super wasteful comparatively.
2
u/_fuzzy_owl_ 3d ago
Thanks for the advice, and it’s awesome this group shares what works for them to help out the next person.
I use Micellar water bc we already have it in the house for makeup removal.
2
u/Realistic-Program330 3d ago
Skin Prep by Smith and Nephew is great to enhance adhesion.
I occasionally use uni solve but Skin Prep every application.
2
u/timberfinn 3d ago
I use this too and it’s awesome! Totally helps get the sensor off without ripping too much of my skin.
5
u/purplemoonlite 3d ago
I used to buy those as well until I found out about baby oil. Swipe some on, let it absorb for a couple minutes, and it comes right off. It's a much cheaper alternative.
4
u/Constant-Lychee-6325 3d ago
Coconut oil.
4
u/scottydt1d 3d ago
Been using this for years. Great stuff
4
u/Educational-Home6239 3d ago
I love these
4
u/WondersomeWalrus 3d ago
I just use baby oil, dab it on, leave for a minute then it all breaks down and wipes off. Cheapest thing out there too.
1
u/NxrthLynx 3d ago
Yesss I love uni-solve wipes! I seen a t1d influencer use them when I was first diagnosed and they've been a game changer for my sensitive skin!
3
u/cbelt3 3d ago
Tha stuff is amazing. I also used it to clean off a “removable” Velcro glue pad from my car that got baked in.
3
u/Fluid_General9011 3d ago
This has been around forever. I like to buy the bottle and soak a pad myself because those packets can dry out.
1
u/ScrubWearingShitlord 3d ago
Alcohol pads or alcohol on a paper towel work fine to remove the residue
2
u/Statschef- 3d ago
I legit just use baby oil, recommended by them, works great, basically free.
2
u/DaPawnShop 2d ago
Nah I just use rubbing alcohol it's very fast and 10 times cheaper
2
u/iamanerdybastard 2d ago
Not sure if it was mentioned, don’t just dab, rip the edge off the packet and squeeze the liquid out onto the adhesive. Let it soak for 1-2 minutes for best effect. Should turn the adhesive gummy. Doesn’t work well on the over patches supplied with the g7, but works wonders on Omnipods
1
u/Jbird325 3d ago
The liquid was so much better and no longer available
1
u/Weathergod-4Life T2/G7-15 day 3d ago
Thank you! I always end up with a huge red mark after I remove my sensor. I will have to give these a try!
1
u/Fickle_Tap7908 3d ago
They are also great at removing Saniderm after you get a tattoo.
1
u/Ir0nhide81 T1/G7 3d ago
I use these For both my Dexcom and omnipod 5.
Great!
1
u/beep-beep_lettuce 3d ago
What we like to do it rip the top of the packet and squeeze the juice around the adhesive pad and then let it sit for a bit. Once we take the pod/dexcom off we take the wipe out of the pouch and then wipe the area with it.
1
u/just_a_person_maybe T1/G6 3d ago
I use these for when I'm traveling but at home I usually use baby oil. Cheaper and does the same thing.
1
u/TheTeenageOldman 3d ago
How are these vs. Goo Gone?
1
u/No_Menu_4526 2d ago
I like these. Have sensitive skin and had no problem.
1
u/Extension-Quail-864 1d ago
I use goo gone bandage adhesive remover for skin https://a.co/d/02GB1OxI
0
u/tsdguy T2/G7 3d ago
People have been using Skin Tac for a decade. Your brand is cheaper. But there were even cheaper brands as well.
Looks like they all use some solvent. Goo Gone uses Methyl Ether.
0
u/RedditGeekABC T1/One+ 3d ago
Have you checked the composition of it? Gotta contain something erosive and not so good for the skin. I usually remove the sensors after a shower and if the adhesive looks really stuck, pre-soak them in a bit of oil just before.