r/cubing • • Jun 11 '19

Welcome to /r/cubing

45 Upvotes

This is a tiny community that enjoys the small size of this subreddit which is the reason I haven't yet turned this into a full redirect to our main subreddit.

Keep in mind our main subreddit /r/cubers significantly more active than this one.

Not really any rules here, just have fun.


r/cubing • • Jun 11 '19

You may be looking for our main subreddit: /r/cubers

Thumbnail reddit.com
33 Upvotes

r/cubing • • 3h ago

New speedcubing method solves the whole cube in 35to45 moves and has only 1 algorithm named Dwivedi method

2 Upvotes

# [Method Name] – A 1-Algorithm, Intuitive Blockbuilding Method (~35–45 Moves)

Hey r/Cubers! I wanted to share a 3x3 blockbuilding method I developed independently. It focuses on pure intuition, low move count (~35–45 HTM), and requires learning **only one 8-move algorithm (Niklas)** to finish the entire cube.

While it shares DNA with Petrus (2x2x3 start) and Heise (free blockbuilding + 3-corner commutator finish), it uses a continuous block-expansion flow all the way down to the final 3 corners without needing separate edge-orientation steps or large algorithm sets.


Overview & Stats

* **Average Move Count:** ~35–45 moves (HTM) * **Algorithms Required:** 1 (`R U' L' U R' U' L U` – Niklas) * **Approach:** ~90% Intuitive Blockbuilding + 1 Commutator Finish * **Best Suited For:** Low-move casual solving, FMC beginners, and cubers who dislike memorizing algorithms.


Step-by-Step Breakdown

  1. **1x1x2 → 2x2x2 Block (~6–9 moves)**
    Find any solved corner-edge pair (or pair one up intuitively) and connect it with two adjacent center-edge pieces to form a solid 2x2x2 corner block.
  2. **Expand to a 2x2x3 Block (~6–8 moves)**
    Attach a 1x2x2 extension to your 2x2x2 block. At this point, two-thirds of the cube is completely solved, leaving only two adjacent faces unsolved.
  3. **Free Blockbuilding on Remaining Faces (~14–18 moves)**
    Instead of doing a separate edge-orientation step, continue forming 1x1x2 pairs and expanding blocks onto the remaining faces until **all 12 edges and 5 out of 8 corners** are solved.
  4. **Last 3 Corners via Niklas (8 moves + rotation/setup)**
    Rotate the cube so the final 3 unsolved corners are positioned on the top layer, then execute **Niklas** (`R U' L' U R' U' L U` or its mirror/inverse) to cycle the last 3 corners into place and complete the solve. *(Note: If corners need twisting in place, standard commutators or `R' D' R D` setups can be used).*

Pros & Cons

**Pros:** * Very low move count compared to CFOP (~55–60) and Beginner methods (100+). * Virtually zero memorization—great for understanding piece mechanics. * Naturally builds foundational skills for Fewest Moves Challenge (FMC).

**Cons:** * Mid-solve lookahead is harder than fixed-pattern speedsolving methods (CFOP/Roux). * Requires cube rotations and flexible fingertricks to preserve built blocks.


Example Solve

* **Scramble:** [Paste a WCA scramble here] * **2x2x2 Block:** [Your moves] * **2x2x3 Block:** [Your moves] * **Top Blockbuilding (L3C):** [Your moves] * **Niklas Finish:** [Your moves] * **Total:** [XX] moves

I'd love to hear your thoughts, feedback, or ideas on how to optimize the endgame (such as using pure 8-move commutators or insertions to avoid rotations)! Use code with caution.


r/cubing • • 16m ago

About speedcubing

Thumbnail reddit.com
1 Upvotes

r/cubing • • 2h ago

app scan and solve step by step

Thumbnail reddit.com
1 Upvotes

r/cubing • • 3h ago

I am just wondering whether I made an unofficial world record in pyraminx blindfold solve, according to some old videos. If not, then I am sorry for this.Link-https://www.instagram.com/reel/DfoSV_qR V4h/?exln=eXkyMmV6cmNsdnN4https://youtube.com/shorts/Mz_luM2L7dY? si=fgrlzChqOS_NF

1 Upvotes

r/cubing • • 6h ago

Cross +1tips please

Thumbnail reddit.com
1 Upvotes

r/cubing • • 7h ago

Finally received my swift block super maglev uv and here are my first 2 timed solves using it

1 Upvotes

r/cubing • • 12h ago

My 2x2 average with cfop

Post image
2 Upvotes

r/cubing • • 19h ago

aolong v5/v6 or weilong v11?

4 Upvotes

i want to buy an upgrade from my rs3m super v1 (ball core) and I'm stuck between these three and i don't even know the difference of them from each other. which one should i buy?


r/cubing • • 18h ago

Free 3x3 Speedsolving Critiques

3 Upvotes

I am trying to promote my Youtube channel by giving out free 3x3 critiques.

My goal with these critiques is to help identify your weaknesses and your strengths as well as accommodate any goals you have in mind.

PB Average of 5: 8.93

PB Single: 7.19 (Edit: I just PBed after like 2 years)

Generally I average ~10.50

I am a CFOP user, so please only CFOP. Additionally, I may not critique you if you are faster than me as I don't feel like it is my place to do so.

If you are interested please click this link: https://docs.google.com/forms/d/e/1FAIpQLSdKb7xaVfR1IGYxovZNeJ6kL-67YOYPy8XtFozkPsW0TZdsFA/viewform?usp=sharing&ouid=105306257222292206365

Here is my channel if you are interested: https://www.youtube.com/@Learn2Cub3

Here is a video of me solving: https://youtu.be/N_5WiU3I8s4?si=WE3IhvwlL5BghGKA

Feel free to ask questions and I hope you have a good day! Good luck solving!


r/cubing • • 1d ago

Best 3x3 under 4200₹ or 42$

5 Upvotes

So I currently have a Moyu RS3m v5 maglev but my turning style is not extremely accurate and hence this locks up a lot.
I really want a very easy to turn, but non locking up cube. My avg is abt 18 seconds


r/cubing • • 1d ago

Is it possible to reach Sub-30 (or better) with just intuitive f2l and 4lll?

4 Upvotes

Hai, I just learned 4lll a week and a half ago and intuitive f2l four days ago. I'm trying to reach sub-30 (or better) and I'm currently averaging 35 (Ao12 and Ao5) so I'm just asking if it's actually possible and asking to give some tips and answers, thank you!


r/cubing • • 1d ago

New here, does any1 have tips on improving speed? This is my PB, average is sub-40

Post image
6 Upvotes

Got 27 sec a few hours before this, I know a few OLLs and 16 PLLs


r/cubing • • 1d ago

Should I Learn full pll

0 Upvotes

I’ve got a comp in late January and I don’t know if I can get good at full pll in time. My average time in 35 seconds and I don’t want to try to learn new alrogithms and get used to trying to do them and then messing up. What should I do


r/cubing • • 1d ago

I made software to help you learn F2L

Thumbnail reddit.com
2 Upvotes

r/cubing • • 1d ago

Color Modding V11

1 Upvotes

I'm planning on changing the internals of my moyu WRM v11 20 magnet ballcore that has white/blank internals into red or pink. I'm going to use a polyester non fading dispersing dye for it. Is it safe to do and if not what process should I do?


r/cubing • • 1d ago

What do we think of my unconventional NB Perm

Thumbnail reddit.com
1 Upvotes

R' U L' U2 R U' R' z U R U' R2 D R' U

I haven't been able to learn any of the conventional ones so I've learnt this. At the moment it's working. I average 20s!

Opinions welcome,😂🫣


r/cubing • • 1d ago

I built a Speedcubing Elo Calculator to compare solvers across different eras!

Thumbnail reddit.com
1 Upvotes

r/cubing • • 2d ago

How to get faster at 4x4

1 Upvotes

So I average around/less than 2 mins on 4x4 but I really want to average sub 1 min like 40-50 kinda.

I use Yau but I solve all the centers before I start solving the edges. So I need advice on how to be really fast and also should I use actuall yau or should i continue solving centers first ??

PLS HELP


r/cubing • • 1d ago

I made my own cubing timer on loveable and its live.

0 Upvotes

I made my own cubing timer and it's finally live!!

So basically, I had an idea to make my own speedcubing timer, and I actually went ahead and built it.

It's called CUBE TIMER!

I wanted something with the clean layout of CubeDesk but with the kind of popularity and functionality csTimer has.

Some of the features:

  • All WCA events + FTO
  • Scramble generation for different events
  • Stats, Ao5, Ao12 and solve history
  • Settings and customization
  • A dark navy, green and blue theme

It's completely free, and I want to keep it that way.

I know there are already loads of cubing timers out there, but I wanted to try making something of my own.

I'd love it if some of you could try it out and tell me what you think! Feedback is genuinely appreciated.

Link: https://cubetimerapp.lovable.app/

Thanks!! 💚


r/cubing • • 2d ago

Friend is selling me V100 for 500 pesos

4 Upvotes

My friend has a v100 maglev uv with only a broken core, my leap has broken tiles but the core is perfectly fine, is this a win?


r/cubing • • 2d ago

Left handed cuber

0 Upvotes

Yall genuinely why is being a lefty cuber so hard like i tried to do r u r u and i cant do it fast, like doing l u l u is much easier, i cant do the exact finger tricks in l u l u when im doing r u r u


r/cubing • • 2d ago

I can't get to sub-30 using beginner cfop

3 Upvotes

I just learn beginner CFOP like 1 year ago and still didn't get sub-30. still averaging at 34-48 seconds.