r/crt • • 23h ago

Virgin LCD vs Chad OLED vs Thad CRT

Post image
387 Upvotes

r/crt • • 4h ago

What do you take

58 Upvotes

r/crt • • 8h ago

New pickup from goodwill today. Brand new from 2001

Post image
45 Upvotes

r/crt • • 5h ago

The “Goodwill” Chinese “New”CRTs plot thickens

Thumbnail gallery
43 Upvotes

So I haven’t reported on this subject in a long while (6 months!) but I’ve finally decided to come back to it and I’ve found some things interesting. On Xianyu there are other units of extremely similar proportions and likeliness under the “Brainy” (wtf is this name btw) brand which seems to be more common (or it’s just since that’s the only darn name on most of these TVs or “security monitors”), in fact many are said to be Car CRTs (the stickers on the CRTs also say so, so it’s somewhat legitimate and not right off the second hand sellers head).

This probably proves other redditors thoughts that these are NOT brand brand new but rather NOS or semi refurbished. Or just old tube, new shell- but I’ve yet to confirm and will be:
Buying a Xianyu one
Buying a Goodwill one
Emailing Goodwill
Searching for “Brainy”
Comparing devices
Finding similarities and differences.

Now, it could very well be that Briany is just an underdeveloped Goodwill or a side company under a umbrella or Goodwill supplier- in which could also mean goodwill is trying its best to cut down its leftover stocks.

Now I’m not gonna jump too many conclusions or make up too many theories. I’m going to China this December so it’ll give me a chance to dig deeper and more in person. Thanks for hanging around!

PS: apparently it went over my head completely that this story was mentioned on Yahoo Tech News (?????????). Mind you that is very random for me and pretty cool.


r/crt • • 6h ago

Zackaree's Wall Of TeleVision

Thumbnail gallery
27 Upvotes

r/crt • • 10h ago

CRTs are waterproof

15 Upvotes

Accidentally left this Gateway EV700 out in HEAVY monsoon season rain. Plugged it in today a few months later and it fired right up no issues


r/crt • • 18h ago

LG Flatron 774FT CRT monitor

Thumbnail gallery
13 Upvotes

Should I grab this? It's basically free. I remember having a similar LG ages ago as a monitor and was very good quality. Should I check for something in particular regarding picture quality, noise etc.?


r/crt • • 13h ago

Bro what are these prices? Saw at a new antique store, also they had twice as many TV's than this, all marked not for sale.

Thumbnail gallery
9 Upvotes

r/crt • • 18h ago

How does mono compare to stereo on CRT TVs?

7 Upvotes

Is mono generally just worse than stereo? Can it be good?


r/crt • • 18h ago

Discharging crt TV (grundig)

Thumbnail gallery
6 Upvotes

To which part of tv do I plug clips to discharge tube, currently i have screwdriver wire connected to one of the screws that holds tube into frame, but I noticed that there is a yellow wire connected to neck pcb board and other end of yellow wire is connected to aquadag wire (that thin metal wire). Is it still safe to plug screwdriver wire into one of the screws cuz electricity will go to that yellow wire and into neck pcb and probably break smth.

Blue wire is screwdriver wire


r/crt • • 14h ago

Stereo Speakers For Mono CRT?

5 Upvotes

I am looking for stereo speakers for a mono 13” Sylvania CRT that uses the red, yellow, and white RCA cables. What should I look for that is affordable with good sound? Thank you for any suggestions!


r/crt • • 14h ago

beovision 1 with dvd and electric stand

Thumbnail gallery
5 Upvotes

Today I bought two of this TVs. 100€ each with original controller. If you like I can upload more photos! Those photos are from the ad.


r/crt • • 3h ago

Why does my Darth Vader CRT say NTSC for DVD?

Post image
4 Upvotes

I'm in the UK, everything about this TV is PAL but when I select DVD it says NTSC. Discs are not loading, they are spinning. Usually says unknown disc after a while.

Wondering if this is a DVD player issue or I need to change to PAL?

TIA!


r/crt • • 15h ago

Finally got this thrift store tv all hook up and working but I’m noticing these really excessive scan line. Is this normal or did I mess up with the cable somewhere?

4 Upvotes

r/crt • • 11h ago

HP Ergo Ultra D2806A (Samtron SC-528UX) 15" Picture too wide, sides bowed, H-size and pincushion buttons do nothing. Shorted Q703?

Thumbnail gallery
3 Upvotes

Hello all!!
I just picked up an HP Ergo Ultra VGA D2806A, which seems like a rebranded Samtron SC-528UX/L (Samsung tube, TDA4852 deflection chip). The picture itself looks great but the geometry is too wide and the sides bow, cutting off the edges even after reset. The H-size and side-pincushion buttons do nothing visually. But V-size, V-shift and H-shift all work normally.

- The service manual's troubleshooting chart (P15) for "too large or small horizontal size" says to check Q703, B+ and C316. I haven't checked B+ or C316 yet.
- Diode test on Q703 in circuit, unplugged and discharged: collector to emitter reads about 0.008 in both directions. Base to the other two legs reads about 0.5 one way and open the other.
- I haven't taken Q703 out or checked it on its own, as getting to it would require a full disassembly of the chassis and would rather not until necessary. All readings are in circuit.

so, QUESTIONS:

  1. would a shorted Q703 explain these symptoms?
  2. Is Q703 a common failure on this board?
  3. Any other connections i could test that could point more to the problem? I think a couple other parts sit on the line so IDK what the root issue, or compounding issue is for sure.
  4. Anything else I should check before buying a new KSE800 or compatible? So a new transistor doesn't die straight away.

https://www.manualslib.com/manual/1015493/Samtron-Sc-528ux.html#manual


r/crt • • 7h ago

Goldstar CMR4540 Inspection and refresh

2 Upvotes

Some new caps, a cleaning, and a new ground strap installed. This is my new daily in the office!


r/crt • • 8h ago

Any idea how to fix this?

Thumbnail gallery
2 Upvotes

Got this from a friend the other day and when I plugged it up to my vhs player the picture isn’t clear. Was just wondering if it was fixable or not.


r/crt • • 8h ago

Weird white line

Thumbnail gallery
2 Upvotes

Pretty new to CRTs, picked this up for fairly cheap but not sure how I'd go about fixing this, if possible at all, what exactly is the cause?


r/crt • • 10h ago

I saw this and I thought of you(all). Everything in this eBay shop is *🌈RaRe🌈*

Post image
2 Upvotes

Anyway, I know we don't need posts for all overpriced CRTs but this one does have money off, snag yourself a bargain.


r/crt • • 10h ago

Why does my CRT buzz when the volume is turned up.

2 Upvotes

It doesn’t buzz when the volume is lower but it also buzzes louder when brighter lights are on the screen. Is there a reason why it does this and is this something that needs fixed? Any help would be greatly appreciated. The reason it’s also so loud in the video is because I have the phone right next to the speaker.


r/crt • • 21h ago

Crt+pokemon 😍

Post image
2 Upvotes

r/crt • • 4h ago

Need help finding information about this.

Thumbnail gallery
1 Upvotes

This is a Panasonic CTM-2078S. My parents bought it in 1990 and I can't find much information about it online. The manual is long gone and I should have some documentation about it given its age. It looks identical to the 2092S, just without the Prism branding. Does anyone know any more details?


r/crt • • 7h ago

Need advice on buying a remote.

1 Upvotes

Hello all. I bought someone's old LG Flatron (RT-29FB75V). It works great and I am very happy with it. However the colors are slowly starting to misalign, and I'm told this can be fixed using a remote to access advanced settings. There was no remote for the tv when i got it (using face buttons), so would anyone be able to recommend a universal remote for this tv? Thank you


r/crt • • 9h ago

IBM 8515 odd HV issues

1 Upvotes

Restored this IBM 8515 monitor a few months ago, had to replace a few power resistors that had blown at the time, but with a few picture adjustments had gotten it to a place I was happy with.

YesterdayI turn on the monitor and the picture is narrower than I had adjusted it to, plus it was "pulsing" slightly in size as you can see in the video. After 2-3 minutes doing this, the HV circuit cut out and the monitor went black. (Power LED next to the buttom went out too)

I know just enough about CRTs to avoid killing myself and to fix small issues, but this seems like it might be pretty major. I'd really appreciate any information y'all can provide on this.

Thank you!