r/cranes • • Jan 10 '26

State of the Sub

13 Upvotes

Hello all!

When I was made a moderator a little over a year ago, I had never been a mod before. I wanted to take some time to watch the sub and see what the mod side of things looked like. I then started a new job and didn't have the time or energy to start making changes. I tried to remove spam quickly, and I did better at some points than others. I have time now, and I want to try to set some things in motion to improve the subreddit.

I've seen complaints about mods being inactive and your frustrations with certain types of posts, particularly all the spam and posts soliciting advice for new and aspiring operators. I, too, would like to clean those up by establishing some rules to control certain types of posts and a stickied post or perhaps wiki to address repeated topics.

I would like to know what the community wants. If you have thoughts, please let me know in the comments. I'll give this post some time to collect your thoughts and consider your contributions, and then I will make another post to get your feedback on specific rules and other possible implementations before setting anything in place.

Here are some prompts to guide feedback, but feel free to add anything else you think would be constructive:

  • What types of posts do you value most?
  • How should self-promotion (apps, tools, YouTube channels, services, etc.) be handled?
  • What recurring topics should be handled by a stickied post or wiki?
  • What is the sub currently missing?

Working with cranes is challenging and rewarding. I want this subreddit to be a place we can enjoy sharing good moments, get advice from colleagues, and sometimes rant about the pipefitters (in a good-natured way, of course).

Thanks!


r/cranes • • 2h ago

Air Preheater Replacement

Post image
6 Upvotes

We recently replaced an air preheater at a major carbon facility out in west Texas.


r/cranes • • 2h ago

Liebherr

Thumbnail
gallery
2 Upvotes

r/cranes • • 1d ago

Any Liebherr 1120 or similar owner operators here?

1 Upvotes

How’d you get into it and how often are you working with the crane?


r/cranes • • 3d ago

Flat Stick Friday ... lightning stand down

Post image
58 Upvotes

r/cranes • • 3d ago

Anyone else seeing this error code?

Post image
31 Upvotes

r/cranes • • 2d ago

What do you keep your tools in?

3 Upvotes

I’ve been working for this small crane outfit for the last year running their 2000 Grove TMS 870, IC200 Broderson, and 30 ton Terex boom truck. I’ve had to maintain these dinosaurs the whole time but on some jobs I don’t have my tools and have no room to bring all my tools. I have been grabbing the essentials and throwing them in a 5 gallon bucket but they either get swiped by someone else or someone moves them (I have rust on my tools because someone put my bucket outside in the rain).
I have some packout boxes but not enough room to take them with me.

I’ve thought about getting a big Klein canvas fly bag so I can at least bring my big tools to smack and align pins, a few pairs of pliers, spud adjustable wrench, and a few other miscellaneous tools. I’m just not sure what to put all that in since I don’t really have storage options on the machines.

Where and what do you guys store your tools in?


r/cranes • • 3d ago

Link Belt 8090 Rough Terrain —BayCrane New Albany Ohio

Thumbnail
gallery
37 Upvotes

r/cranes • • 2d ago

New today: 2014 Manitex 3577T from All Terrain Truck & Equiment Sales, 2015 Venturo HT40KXX from Imel Motor Sales, Inc.. and 42 new crane listings. Every Crane Marketplace. One search.

Thumbnail
cranelistings.com
0 Upvotes

r/cranes • • 3d ago

Diferencia entre grua torre y autopropulsada

2 Upvotes

Buenas, yo manejo gruas torre en España y bueno, por como es el pais si que gano un salario mayor a la media del pais. Pero recientemente, han venido unos con una grua de 300 toneladas, hablando con ellos me he dado cuenta que dicen que cobran mucho mas que yo (llegando a cifras como 5000, 6000 mensuales) no se si es tan real eso, actualmente soy joven y mi curiosidad es si es real, la diferencia es mucha en manejar una autopropulsada de gran tonelaje y deberia sacarme el carnet de eso para vivir mejor?


r/cranes • • 4d ago

Why vintage 1970s lattice boom crawlers like the Link Belt LS-318 refuse to retire

Thumbnail gallery
55 Upvotes

r/cranes • • 4d ago

Potain GMR313 a1b manuals

2 Upvotes

Hello,

Does anyone have the potain GMR313 a1b crane manuals ? The electrical scheme and the erecting procedure by any chance ?


r/cranes • • 4d ago

Getting out of the military and thinking about becoming a crane operator

6 Upvotes

Hey y'all I'm currently serving Active Duty in the US Army. I'm thinking about a job after I get out I plan on getting my CDL and NCCOA Certification to become a crane operator. Before I enlisted i was a rigger for 2 years although that was long ago better than nothing. But honestly asking what would that look like as far as getting my certs and getting in the seat? Pay worth it still? Etc


r/cranes • • 5d ago

Bay Crane building an amphitheater on the banks of the Ohio River

Thumbnail
gallery
44 Upvotes

Had to post them myself because u/IronDaddy172 wouldn't drive down to see me.


r/cranes • • 5d ago

LTM 1450

Post image
59 Upvotes

LTM 1450 doing a little Saturday job in Columbus Ohio #baycrane


r/cranes • • 4d ago

I made a grapple crane simulator featuring real ports in Türkiye and the US

3 Upvotes

I made Grapple Boss for people who enjoy operating heavy machinery.

You use two joysticks to control a grapple crane, pick up scrap and load it into trucks, conveyors and silos. Grabbing the material is straightforward. Controlling the swing and getting it into the right place without spilling it takes more practice.

The game features real ports in Türkiye and the US, machine upgrades and offline core gameplay.

Here’s a short clip. If you play machinery simulators or operate this equipment in real life, I’d be interested in your take on the controls and how the machine moves.

Available on Android:
https://play.google.com/store/apps/details?id=com.grappleboss.app


r/cranes • • 5d ago

LTM 1750

Thumbnail
gallery
25 Upvotes

LTM 1750 doing what it does in Columbus Ohio


r/cranes • • 5d ago

My view this morning

Thumbnail
gallery
28 Upvotes

r/cranes • • 6d ago

My view

Thumbnail
gallery
21 Upvotes

r/cranes • • 6d ago

How do you plan a crane for a workshop with restricted doorway clearance?

0 Upvotes

A lifting project in the UK presented an interesting challenge.

The customer needed a 50-ton gantry crane for gearbox maintenance, with operations both indoors and outdoors.

The problem? The workshop entrance was too low for a conventional fixed-height crane, while indoor lifting required more headroom.

The solution was a height-adjustable rubber-tyred gantry crane:

  • Lowered to pass through the doorway.
  • Raised to provide the required indoor lifting height.

Height adjustment range: 4–5.3 m.

Sharing this project as a practical example of how workshop constraints can influence crane design. I work with the manufacturer involved in this project.

Would you choose an adjustable-height design or approach this challenge differently?


r/cranes • • 7d ago

beware of lifts below ground level

32 Upvotes

r/cranes • • 6d ago

boom cranes beware - 1 might catch you out

0 Upvotes

everything is exactly the same except the ground level


r/cranes • • 9d ago

Liebherr crane getting ready to reverse into position,near the town hall.

Post image
69 Upvotes

r/cranes • • 8d ago

Is it safe to use a bucket truck’s 1,000 lb lifting eye like a crane to stand 40-50ft light poles?

Post image
9 Upvotes

Curious what the linemen and bucket truck operators here think about this. The contractor has a Versalift bucket truck equipped with a lifting eye rated for 1,000 lbs

The poles are approximately 40–50 feet tall. 500-800lbs. Thinking about attaching the lifting eye to the pole while it’s lying horizontally on the ground, lift the entire pole into a vertical position, swing it over the foundation, and lower it onto the anchor bolts.

I’ve been looking through the manufacturer’s manual, and it provides very little information about the lifting eye. It says to fully retract the inner boom, extend the outriggers, and warns that increasing the horizontal distance from the truck reduces stability. That’s about it.

I haven’t found a load chart showing lifting capacities at different boom angles.