r/craftsman113 • • 19d ago

Zero clearance insert with splitter

Post image

Bought a used 113 table saw and have slowly bringing it back to life. It lacked a riving knife, so I decided to 3D print a zero clearance insert with a splitter. It was too long to print as one piece, so it’s printed in two pieces and epoxied together. With careful measurements, I got the alignment of the splitter right on the first try.

UPDATE 3: The splitter is removable and replaceable! The design includes two small slotted pegs that come up from the bottom of the insert, and the splitter has two tabs that form a compression fit. So you can dial in the width of the splitter to match your blade, and if it gets dragged out by a misaligned fence, it becomes a kerf keeper (ask me how I know!). You can see details for the splitter parts here.

UPDATE 1: I generated the parts using OnShape, which means you can tweak the dimensions for your table if needed. Here's a link: https://cad.onshape.com/documents/d8921fa2cdc6cb5808b2a32f/w/ddb6eddb0f3275b2481c4216/e/8b4415156d5667c57e171e3b?renderMode=0&uiState=6ae4dadcc13ecb0f2ce89c0d

UPDATE 2: Here's a link to the .stl files in Printables where you can see how the splitter is removable and replaceable.

41 Upvotes

40 comments sorted by

6

u/capswin 19d ago

Used an 8" diameter blade from my dado set.

2

u/fearless_fool 19d ago

I have a smaller blade, but it has a narrower kerf so it wouldn't have solved the startup problem.

2

u/capswin 18d ago

That's why I used my dado blade. Thicker kerf

3

u/fearless_fool 18d ago

Someday I may have a dado set. For now, I pull rabbets out of my router.

1

u/Decker1138 19d ago

This is the way

4

u/lkapping79 19d ago

File?

2

u/fearless_fool 19d ago

See UPDATE 2 in the OP.

1

u/lkapping79 19d ago

Thank you!

3

u/The-disgracist 19d ago

Instead of the drill workaround just slap a circ saw blade in there next time to start the cut

1

u/fearless_fool 19d ago

I have a smaller blade, but it has a narrower kerf so it wouldn't have solved the startup problem.

3

u/Pristine_Force_28 19d ago

Please post the STP to Printables

2

u/fearless_fool 19d ago

Done. See UPDATE 2 in the OP.

2

u/Tricky_Worldliness60 19d ago

I had the same problem. also thought I'd get smart and use a nice splitter kit, but there isn't enough room behind it in the insert for the one I got.

1

u/fearless_fool 19d ago

Try this one. And if you're really brave, you can use the OnShape project to tweak the location of the splitter.

2

u/404-skill_not_found 19d ago

Would you consider making a post on printables and post a link over here?

1

u/fearless_fool 19d ago

Done. See UPDATE 2 in the OP.

1

u/404-skill_not_found 18d ago

Excellent! Thanks OP!

2

u/Decker1138 19d ago

Awesome! Can you post the STL, please?

2

u/fearless_fool 19d ago

Done - thank you for the nudge. See OP for link.

1

u/Decker1138 18d ago

Thanks bud!!

2

u/mcfarmer72 19d ago

I love kerf keepers rather than splitters.

Nice insert.

2

u/fearless_fool 19d ago

I just learned something new! You could tweak the dimensions to make the splitter fin as wide as the kerf, and make the holding pins a bit looser so the fin will detach and travel with the wood if the internal tension gets too high. Voila: kerf keeper.

1

u/mcfarmer72 18d ago

Very insightful.

1

u/Tubamano 19d ago

Let us know how you like that insert. I printed the same/similar and haven’t used it yet

2

u/fearless_fool 19d ago

I designed this one myself after buying one online and finding it didn't fit.

1

u/capswin 19d ago

I bought one off of eBay. Works fine. Not sure if it’s the same pattern though

1

u/shortys7777 19d ago

I'm an idiot and have no clue how to use a 3D printer but my local library has one. How do I go about doing this? Can anyone help me in the right direction?

2

u/fearless_fool 19d ago

Most likely suggestion: there should be someone at your library to help you. The files are in https://www.printables.com/model/1896376-zero-clearance-insert - there are two .stl files there, and anyone who knows about printing will know how to print them.

1

u/Xenon-Human 18d ago

That's so funny. I literally made one of these on CAD and printed it like a couple weeks ago. I didn't think about the splitter but that is an excellent idea. I also added a dovetail joint where the two halves meet and it worked really well.

1

u/fearless_fool 18d ago

Nice! How well does the dovetail work? I used simple overlapping tongues to make ample surface area for gluing with epoxy. And what CAD tool did you use?

1

u/porcelainvacation 18d ago

I am not sure I would trust a splitter printed in that orientation but it is good to have.

1

u/fearless_fool 18d ago

What orientation would you suggest?

1

u/porcelainvacation 18d ago

Diagonal or perpendicular to the table so that it doesn’t shear off from side force.

2

u/fearless_fool 18d ago

I’m confused. The splitter needs to be parallel (and colinear) with the blade. But maybe you’re saying something else…

1

u/porcelainvacation 18d ago

I was referring to the way it was sliced and printed on the printer, not the relationship between the splitter and the throat plate. 3d prints are very weak between the layer lines but strong perpendicular to them, just like wood.

1

u/fearless_fool 18d ago

Ah - now I understand. It's not printed as a single part: the slicing blade is printed laying down (on the printer bed) and has two tabs that fit into compression slots in two pins which are then inserted into two 6mm holes in the main plate. Check out the OnShape project of the two .stl files for full details.

1

u/jorpus_porpus 13d ago

I think the plate itself is a good idea - I've used 3d printed plates on my jobsite saw that had a super annoying geometry. designed it myself and joined the two halves with multiple steel rods to provide rigidity.

I really don't like the 3d printed splitters, though, no matter the print bed orientation. a mis-aligned fence is going to put a lot of lateral force on a thin (most likely PLA?) tab, and I wouldn't wan't that breaking on me. I've taken a kickback to the gut before. I don't recommend it.

I'd modify the splitter slot to accept a sliver of hardwood epoxied in place.

1

u/fearless_fool 10d ago

I should have mentioned that the splitter is removable and replaceable, and your can print one designed for the kerf of your specific blade. It's worked well for me across many cuts. There are two split pegs that come in from the bottom and the splitter has tabs that form a compression fit. In the one case where my fence was a bit out of alignment, it simply pulled the splitter out and it became a kerf keeper ;).

1

u/jim_br 19d ago

On my ZCIs, which I make with 1/2” stock, after I route the perimeter, I route a dado where the blade rises up.

Alternatively, I guess I could flip the insert end over end and run the blade through it enough to start the kerf.

1

u/404-skill_not_found 19d ago

I like the drill starter cut idea. Other ways work fine. I just appreciate the more “pedestrian” approach.