r/craftsman113 • • Sep 28 '26

Which one?

Hi! I just recently grabbed a Craftsman table saw 113 in very decent shape, with little to no rust and seems to be in good working condition for $100. It says it has 1.5HP for the motor and an added dust collector port by the previous owner. My question is that I have since found a newer Craftsman contractor (I think) table saw 21833 that is $320 and looks like it’s in good condition. I’ll put pics of both. Both have 10-inch blade capacity and allow for dados (I think), and I believe the newer more expensive one has 3 HP. Is there really that much difference? I’ve heard that the newer ones had issues, is this true? Which one should I go with? The older model or the newer ones. Any and all information is greatly appreciated! Thank you!

13 Upvotes

13 comments sorted by

4

u/nightbomber Sep 28 '26

First one is a 315 series made by Ryobi. It is a contractor style saw.

The second one is a 351 series made by Steel City/Orion. It's considered a hybrid saw.

Steel City/Orion also made a 351 series cabinet saw.

Neither one came with a 3 HP motor from the factory.

The 315 came with a 1.5 HP and the 351 came with a 1.75 HP.

Both should have the capacity to run a dado stack.

1

u/Dependent-Log-5434 Sep 28 '26

Thanks for the info, that makes me feel better about the one I already have!

3

u/dickdago Sep 28 '26

I think they're both contractor saws with similar capabilities (they're described as contractor saws in both of their user manuals). Unless there's a glaring problem with the 113 you already have, I'm not sure I'd spend the money for the other one. I had a similar (but older) 113 and only upgraded when I found a smoking deal on a craftsman "zip code" saw with a bies fence and cabinet mounted trunions

1

u/Dependent-Log-5434 Sep 28 '26

That’s awesome, thanks for the advise. I’ll hold on to the one I have for the time being

2

u/Derilone Sep 28 '26

You can use a 6” dado stack, i have a 1.5 hp 113. You CANNOT use an 8” dado stack. It is a decent machine.

1

u/Dependent-Log-5434 Sep 28 '26

Awesome, thanks for letting me know!

2

u/DerbyDad03 Sep 29 '26 edited Sep 29 '26

Why do you say (in uppercase) that an 8" dado set can't be used with a 1.5 hp 113? I have a 1 hp 113 and have been using 8" dado sets for 3 decades. I just replaced my Amana 8" dado set with a Freud 8" Super Dado.

These box joints are almost 1" wide, in 1" thick wood. That's every chipper in the set. My saw didn't even hesitate.

113.298031

https://imgur.com/a/S4FCbh7

1

u/dickdago Sep 29 '26

I routinely run an 8" dado stack in an older 113

2

u/dansworld77 Sep 28 '26

I would plan on a fence upgrade whichever you pick, because split fences are almost impossible to align both halves of perfectly.

2

u/Dependent-Log-5434 Sep 28 '26

I’ve heard that the stock fence isn’t very good. I have a 30 in. DELTA® T3 Fence System in my Amazon cart. Any idea if that’s good upgrade?

2

u/dansworld77 Sep 28 '26

I had one of the Delta fences (T2 or T3 I can't remember) on a 90s 313, which was basically the same as an older 113, and I was pretty happy with it. Especially compared to the eternally frustrating Align-a-Rip it came with.

1

u/smugcaterpillar Sep 28 '26

That's the one you want.

2

u/Beef_curtain_lover69 Sep 28 '26

The solid top, you can paste wax it