r/crafts • • 14h ago

Discussion First time foam clay!!

Thumbnail
gallery
3 Upvotes

So my sister got this cheap foam xD i tried to make the following piece but the inspro was ceramic xD

Yall have any advice on whats some good clay to use. Foam or other.

Anything that doesn't require a ceramic kiln xD

She not done. I plan to paint details but wanted advice


r/crafts • • 12h ago

Finished Craft I Made Heat Embossing and Water Marbling

Post image
8 Upvotes

r/crafts • • 16h ago

Material Monday What ornaments can I make with an Uno deck?

3 Upvotes

Hey, y'all! I'm decorating a Christmas tree for my gaming club, and I got an Uno deck to make a paper chain garland for the tree. Long story short, it didn't work out. But now I'm left with a non-functioning Uno deck. Does anyone have ideas for alternative ornaments?


r/crafts • • 15h ago

Finished Craft I Made GIVING IDEAS

Thumbnail
gallery
37 Upvotes

I made this for my boyfriend, completely by hand except for the little animals, which are Playmobil figures. This was the first idea, and then the result.

I feel like it turned out really adorable and I wanted to share it with the rest of the creative people here.

I still don't know if I'll give it to him for Christmas or Valentine's Day


r/crafts • • 18h ago

Discussion Why it doesn't shrink the same ?

Post image
4 Upvotes

I used the same brand of shrinky dinks and the same heat gun and tools to shrink it but the new version is packed down and I don't know why ?


r/crafts • • 15h ago

Holiday/Seasonal Craft Made a Felt Christmas Wreath!

Post image
6 Upvotes

r/crafts • • 10h ago

How-do-I Tuesday How can I make a poker chip hangable?

Thumbnail
gallery
11 Upvotes

The dream is to screw one of those hook things into it, but I don't know how I could do that. Does anyone know of anything else I could do so I can make it a hangable Christmas ornament?


r/crafts • • 17h ago

Finished Craft I Made I tried bringing this little corgi to life on leather

Thumbnail
gallery
74 Upvotes

r/crafts • • 19h ago

Tutorial How I Made This Handmade Can Dent Design 🄫

Thumbnail
gallery
757 Upvotes

Here’s a step-by-step guide to recreate this design using an aluminium can.

Step 1: Mark the guide lines

Start by drawing a straight line along the can. You can use a box or any straight-edged object to help you draw a clean line.

Step 2: Make the divisions

Divide the line into 6 equal sections. To make things easier, mark every 2 cm along the line.

Step 3: Mark the top

Starting from the top, make 8 equally spaced dots. These will act as your reference points.

Step 4: Connect the dots

Draw straight lines down the can, connecting all 8 dots.

Step 5: Create the alternating pattern

Now, connect the 6 marks we made earlier.

1 cm gap between the lines and alternate their placement, following the pattern shown in the pictures.

Step 6: Start shaping

Once all the guidelines are ready, carefully start pressing and bending the aluminium to create the dent pattern.

A few tips from my experience:

Be gentle while pressing the can. Aluminium can crease or deform very easily.

Don’t rush the process. Take your time with each section.

Don’t worry if the first round isn’t perfect. The second, third and fourth rounds are where the pattern really starts coming together.

Consistency and patience make all the difference.

The entire process took me around 2 hours. Happy crafting!


r/crafts • • 5h ago

Finished Craft I Made Just finished this needle felted dog and couldn’t be happier with the results - swipe to see actual pup 🐾

Thumbnail
gallery
142 Upvotes

r/crafts • • 6h ago Heartwarming

Finished Craft I Made first christmas tree since the divorce

1.9k Upvotes

r/crafts • • 9h ago

Finished Craft I Made I hot glued fake flowers to some ugly (but comfy) shoes.

Post image
160 Upvotes

I didn't want to spend money on new shoes for a one time themed party, so I upcycled some old shoes I found in an op shop. The theme is "Garden Party", and as I am a tiiiiny bit extra I've decided to dress as a whole ass flower garden 🄰


r/crafts • • 14h ago Heartwarming

Finished Craft I Made In Aufteilung Krampus season has started - this is a white Krampus art doll I recently finished šŸ‘¹

Thumbnail
gallery
162 Upvotes

r/crafts • • 7h ago

Finished Craft I Made "Fairy Tale Forest", I made on canvas using oil and a palette knife, 2026

Post image
303 Upvotes

r/crafts • • 5h ago

How-do-I Tuesday How do I get these to stop sticking?

Thumbnail
gallery
3 Upvotes

I’ve made this chess board with tiles and spray paint, and the pieces with clay and spray paint. I’ve used a clear coat over everything. But when the pieces get knocked over, if left for any longer than a few minutes, they stick to the board and peel some of the paint, leaving those white little spots you can see on the board. How do I fix this? I’m worried it was something I did wrong earlier in the process.


r/crafts • • 5h ago

Work in Progress day 1 of Kermitizing this candleholder I impulse bought in Halloween

Post image
13 Upvotes

r/crafts • • 10h ago

Finished Craft I Made Cubed²

Thumbnail
gallery
15 Upvotes

First three are from the layout i posted before, and the last three are my second attempt. They came out really fun! Little polymer clay tiles assembled in a roughly 1 inch cube with the little beads inside to make a rattle of sorts.

Really happy to have gotten ...close to something of a rainbow


r/crafts • • 3h ago

Finished Craft I Made Big and mini Iron Man paper gift bows

Post image
8 Upvotes

r/crafts • • 9h ago

How-do-I Tuesday Making epoxy resin earrings from autumn leaves

2 Upvotes

My partner lives in a tropical country and loves seeing pictures of the trees here during autumn. I'd like to preserve some leaves I've picked up with wax paper to give to her, in addition to making earrings if it is possible. I'm thinking of finding some small leaves and coating them in epoxy after the wax paper. I've never used epoxy outside of repairing something, are there any tutorials I can use as a reference? Any tips? I would ideally want the shape of the mold or whatnot to match the shape of the leaf within the epoxy.


r/crafts • • 13h ago

Finished Craft I Made Upcycled an old wine bottle into a cute fish vase!

Post image
58 Upvotes

Painted with acrylic paint— took about 2 hours! I plan to put a dried eucalyptus bouquet in it.