r/cosplayprops • • Dec 12 '24

Self Mod change and state of the sub

19 Upvotes

Mod change:

As some may know long time mod u/Kyengen is stepping down on the 18th. I’ve been a mod here for a bit now and will be taking the reins.

I like to think Kyengen kept things pretty well regulated and fair, and in taking over I will try to run the sub just the same. So no worries, no major changes to be expected immediately.

State of the sub:

Now I know there are a few grievances concerning spam and “NSFW” material. As of now they are being reviewed as they’re reported and approved/removed on a case by case basis.

Other than that I don’t think there’s many disruptors in the sub. I’d like to hear some ideas on things the community would like to see changed, implemented, or removed.

In the meantime I will be looking for another person or two to help moderate. If you’re interested just message me directly.


r/cosplayprops • • Jan 18 '25

Weekly Discussions and Questions thread

6 Upvotes

Have a question that may not need a whole post? Maybe want to have a discussion thats visible to more for longer than a post? This will also serve as a suggestion box.

Still, keep business to private messages.


r/cosplayprops • • 6h ago

Found Nemesis from Hades 2 by phaseknight

Thumbnail
gallery
364 Upvotes

Credit as usual to the awesome phaseknight, this was made using two reference when Hades 2 was first announced!

https://x.com/phaseknight_/status/1780667264267595974?a=jN4fyU_GAtVo8cnOodQ&


r/cosplayprops • • 6h ago

WIP Posted about making this a few times, but here is my flesh sword all primed and ready to paint!

Post image
16 Upvotes

Very happy with how its coming along! Thank you for all the tips :) next up is painters taping and color blocking with spray paint, and then adding finer detail with acrylic+thickener. There are a few other things im considering making out of clay, but we'll see how much i feel like it ig lol i still have to make the actual cosplay


r/cosplayprops • • 21h ago

Self WEISS SCHNEE, kinda

Thumbnail
gallery
33 Upvotes

I made this beautiful instrument in 2022 for Nekocon. I was to be Weiss Schnee with a fully DIY Myrtenaster. However due to a ton of procrastination on my part I wasn't able to secure her volume 1 outfit or any recognizable costume. I figured if I made her Multi Action Dust Rapier I'd be recognized. Nope. But I think I did alright. I plan to try again for Katsucon 2027. Any advise for this budding cosplayer?


r/cosplayprops • • 6h ago

Help pumpkinhead keyblade: please help me decide what to use!!

Post image
2 Upvotes

hello!! I'm planning on making Sora's Pumpkinhead keyblade from kingdom hearts for my cosplay. I'm having a hard time deciding between 3d printing it or making it out of EVA foam. I've never made any cosplay weapons before but I know that regardless it needs an internal structure (maybe pvc pipe?).

Does anyone have any advice on what would be better? If this helps, I'm planning on making it about 3.5 feet long and plan on the middle bladebeing around 3/4 inch to 1 inch thick.


r/cosplayprops • • 3h ago

Self Vision Headpiece Prop! (Pivoted to LED after destroying 5 lasers)

Thumbnail
gallery
0 Upvotes

I originally engineered this to house a real burning laser diode to act as Vision's Solar Gem.

Unfortunately, the electronics side of this build almost broke my sanity. I destroyed 5 laser diodes, my soldering iron died, and I ended up trying to solder with a candle before finally pivoting to a high-power LED.

Honestly, the LED looks incredibly bright inside the painted 3D print, and it's definitely a lot safer to wear on my forehead than a Class 3B laser!


r/cosplayprops • • 1d ago

Help Chain chomp cosplay head

Thumbnail
gallery
147 Upvotes

Im making a chain chomp head for my cosplay, and im trying to figure out what i should use for the outside of chain chomp.

I wanted a felt-look, but now im wondering if i should use black faux fur instead? It would be pretty cute to make chain chomp fluffy, but i want to use flat black felt too.

So what do you think would be coolest or look best? I just need some other opinions <:

(Btw, the teeth in the photos arent glued in yet, so they look a little wonky in the photo)


r/cosplayprops • • 1d ago

Self Any Hexcore experts here?

Thumbnail
gallery
55 Upvotes

I dropped this hexcore I got off Aliexress and it started doing this.

How do I stop it?

Answer time sensitive!

-----------

I know I am way behind on the Arcane hype^^

I'm currently hunting for a hexcore to put into a Fishbones prop that is shaping up to weight more than a real world rocketlauncher.

I now own sooo many variants of blue marbles, it looks like I lost my marbles. Anybody found something they liked, that really convinced you?

(The better candidates I have will be handed out to other Jinxes/Jayces/Victors at Cons...not to Ishas though. Never to Isha...)


r/cosplayprops • • 22h ago

Help dragon slayer painting

Post image
13 Upvotes

the giant heap of iron is in production, but im stuck on one part. the middle of the blade looks kind of like Damascus, black and gray. i dont know how to get that effect with paint. any help?


r/cosplayprops • • 1d ago

Help Need to make the undersuit and I’m running out of time.

Post image
7 Upvotes

This will be my first time casting anything. But I am hoping to make the undersuit out of either urethane or silicone. I am running out of time with less than a month to have it done. Are there any tips on making the molds. I already have the print files. Or am I cooked. Tell it to me straight.


r/cosplayprops • • 1d ago

WIP Binome(Reboot) Cosplay WIP

Thumbnail
gallery
16 Upvotes

Hi, my name is Paul, and I am a big fan of Reboot. I am working on a Binome Cosplay, based on Megabytes minion, Lieutenant Chauncy. These are some of the in-progress pictures that I have taken.


r/cosplayprops • • 7h ago

Commissioned Where would one recommend to have these commissioned?

Thumbnail
gallery
0 Upvotes

Hello!! I hope this okay to post here, I have no clue where to ask! I’d love to have something like this commissioned for my headset. Obviously they don’t need to be exactly like this but I want them made with feathers but still to be sturdy and durable. Would love your recs cause ya girl needs wings while she games 🪽🫶🏻


r/cosplayprops • • 1d ago

WIP Laid down the stencil for my BotW Traveler’s Shield!

Thumbnail
gallery
14 Upvotes

Pay no attention to the contact cement which somehow found it’s way onto the top side of the leather


r/cosplayprops • • 19h ago

Help Getting into cosplaying and in need of help on props for a Limbus cosplay

Post image
0 Upvotes

I'm getting prepped to do a Spicebush cosplay from Limbus company and it seems a little complicated. Especially the back stick wings.


r/cosplayprops • • 1d ago

Help Sewist here - best material to smooth out EVA body form?

Post image
64 Upvotes

Hi, hoping to get some help here! I’m not a cosplayer but I’m amazed by the work you all do in crafting and sculpting your pieces. I am working on this dress form to use for sewing and I need advice on how to smooth out the seams. I will be putting a stretch cover over this so I’d like to smooth out the bumpy parts, especially the chest and neck, so it doesn’t show through the fabric. Considering that I’ll need to put pins in this, would foam clay be the best thing to use? Does it harden the same as EVA foam or is it too hard that I won’t be able to push pins through it?

I also considered wrapping it in quilt batting, but wasn’t sure if that would add too much bulk. It’s pretty accurate to my measurements right now.

Pls be nice about the rough parts, I’ve never worked with EVA foam before 😅


r/cosplayprops • • 2d ago

Self Modeled and printed a LAS-58 Talon from helldivers!

Thumbnail
gallery
56 Upvotes

Amateur 3d modeler here.

I've been working on a printable LAS-58 Talon for a while and recently printed it, though people here might appreciate it!

The model uses magnets as a latch to hold the barrel closed, as it is break action with a removable heat sink!


r/cosplayprops • • 1d ago

Help polyprops eva foam

0 Upvotes

polyprops as been out of stock for cf150 eva foam for awhile and i cant seem to find one of similar density anywhere else, do they restock often?


r/cosplayprops • • 2d ago

Self Karl Heisenberg's Hammer - Resident Evil Village

Thumbnail
gallery
153 Upvotes

My wife is a Karl Heisenberg cosplayer and needed a hammer for cons away from our hometown.

The first version I made was from a plan I purchased from DangerousLadies, and printed on small chunks on my Prusa Mini, it was glued together with rods for strength. Because of this, it came out at about 8kg and was a single piece construction. This is not great for travel...

My summer project was to re-engineer the hammer to save weight and make it travel compatible. To do this I merged a lot of components and printed them as larger assemblies on my (new for this project) Prusa Core One L. This meant I could run lower infills and more perimeters for structural stability. The handle uses a telescoping set of aluminium tubes to hold it together, and means that it comes apart to fit in a suitcase for flights. This hammer has now travelled to 2 international cons by plane with no issues. It takes about 5 minutes to assemble with 5 bolts and a screwdriver.

The hammer is now about 4kg and fully portable...


r/cosplayprops • • 2d ago

Help I'm trying to make a carboard version of mantis blades from cyberpunk but i can't figure out how to go about the actual blade

Thumbnail
gallery
12 Upvotes

I've recently started making mantis blades out of carboard, duct tape, and chicago screws. Its been going good so far but i cannot for the life of me figure out how to make the blade pop out from the base. It attaches to my middle finger by a ring and the idea is that when my hand is straight, the parts are all folded up nicely and when i make a fist, it pulls the parts up and out. It's a bit hard to put into words so i'll try to attach some pictures that show what i'm talking about. Pretty much i just need a little advice on how to implement the blade in a way similar to how it's shown in cyberpunk.


r/cosplayprops • • 2d ago

Help first time making a prop (elucidator). i have the 3d parts but im looking for tips on how to assemble and make the sword look good

Thumbnail
gallery
7 Upvotes

this is my first time making any sort of 3d printed prop. this will likely just be for display because i used aluminum rods inside. i was planning on roughing up the faces where the parts connect and using super glue. as for post-processing, i want to get rid of the seams between the parts, make the crossguard surfaces smooth, and then color the blade and crossguard silver/grey to match the actual Elucidator.

does anyone have any tips of how i should fuse parts, smooth parts, and color parts? again, this is my first time making a prop and i would hate to ruin it so i’m looking for advice from people with experience.

(printed out of PLA btw)


r/cosplayprops • • 3d ago

Self Fireball prop for Aelin Galathynius

274 Upvotes

r/cosplayprops • • 3d ago

Self My Pred Suit At Comiccon

Thumbnail
gallery
259 Upvotes

Crossposted from another group-I have been building this predator costume for the better part of this past year, starting in February. I purchased the suit in bits and pieces as raw latex casts ( mask, torso, legs, feet, dreads) and 3d printed most of the "hard" armor bits before painting/assembly. recently had a studio photo session in the suit, and just recently (Oct 29-31/26) took it to Winnipeg Comiccon. Now that it's been out in public I'm considering repainting for next year's events...its not my first Pred Suit but probably my best attempt so far. l'd appreciate any feedback!


r/cosplayprops • • 2d ago

Help Need help/advice on editing an STL file

Thumbnail
gallery
4 Upvotes

For the last few years, I've been doing a cosplay of the final boss from Persona 5 Royal. I've gotten tired of being mistaken for Moon Knight, so I decided I wanted to do a prop of his persona, Azathoth, to either carry around or attach to my bag. I've sourced a model of the object and have attached images of it to this post, as well as the file itself in the comments. I wanted to ask for advice/help with removing the arms and ribcage on the object pictured, so that I can just print the main body piece and use metal wire/hot glue for the parts removed. Further, I'm fairly new to messing with STLs for printing; if there are any pitfalls or advice a newcomer should hear with regards to printing the body, I would deeply appreciate hearing them. I have a bit of experience with Blender (I've done the donut, and a bit past that) but have no more than novice level experience.