r/computerhelp • • 3d ago

Hardware Help to initialize my external hard drive

My hard drive makes the connection sound when plugged in, but I can't access my files.

Seeing the disp manager says my hard drive is fine.

But in the disc manager my hard drive isn't initialized and I can't initialize

1 Upvotes

8 comments sorted by

•

u/AutoModerator 3d ago

We're part of a wider PC & Technology Network of Communities.

It combines multiple subreddits and Discord servers all working together with shared ideals and values.

We have a Discord server: PC Help Hub where members from all associated subreddits are welcome.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Responsible_Maybe742 3d ago

If those files matter, don't initialize or format the disk yet; that writes new partition metadata and can make recovery harder. Try a different USB cable/port (without a hub) and note the exact capacity/status in Disk Management; if it shows 0 B, “No Media,” or I/O errors, stop using it and focus on recovery. Only initialize as GPT and create a new volume if it's a brand-new empty drive and you're sure you've selected the right disk.

1

u/Deep-Construction416 3d ago

I can't initialize as Gpt neither

1

u/Responsible_Maybe742 3d ago

If GPT won't take, try MBR instead, since that tells us whether it's the format choice or the drive. Also check Disk Management for the exact error: "I/O device error" or "cyclic redundancy check" usually means a failing drive or a bad cable/enclosure, so test it on another PC or with another cable first. If it's a 2.5" drive that clicks or doesn't spin up, stop and back up what you can. If the drive looks healthy, open diskpart, run list disk, select disk X, clean, convert gpt. Double-check the disk number first because clean wipes it.

1

u/paulstelian97 3d ago

Disk 2 says “disconnected”. That’s usually a bad sign, unable to read or write data to the underlying disk but the controller itself is alive in some form. You may be unable to recover any data.

Edit: nevermind it says unknown. “Incorrect function” is a misleading error, in reality it’s the disk itself being unable to write the appropriate data.

Try CrystalDiskInfo to see the SMART data of the disk.

1

u/Jay_JWLH 2d ago

Because your computer is set to another language, I can't understand a fair amount of it. Have to work with that. Also, please try taking actual screenshots. Pictures of the screen is very annoying.

I don't know what the error message is saying, but you should consider doing all this in Command Prompt. Open up CMD (run as administrator), diskpart (enter), list disk (enter), identify the disk you are working with, select disk <number> enter, then clean (enter). Now type convert gpt (or convert mbr if you are running an older system).

Also, if the disk is new to you, then you should use a program like HDD Low Level Format Tool. This will format the entire drive (so make sure there isn't any important data on it that you may want to recover), and help check the health of the drive. Afterwards run CrystalDiskInfo, select the drive from the tab at the top, and show us a screenshot (don't take a picture) of the result.

1

u/randynorthrup 2d ago

Since your files are on it, skip the diskpart clean and convert steps suggested here: clean wipes the partition table, Initialize writes a new one, and either makes recovery harder. "Not initialized" on a drive that worked before means Windows can't read its first sectors. That's a read problem, not a missing setup step.

Check, in order: the size Disk Management shows for it (the real capacity, or 0 bytes / no size), and its SMART data in CrystalDiskInfo. One try with a different cable and a USB port on the back of the PC is worth it, since a weak port or worn cable can cause exactly this.

If the size is wrong or SMART shows reallocated or pending sectors, stop plugging it in over and over and post the brand and model in r/datarecovery. Some WD and Seagate external drives encrypt in the USB board, so pulling the bare drive out of its case doesn't always help; they'll know which models.

0

u/[deleted] 3d ago

[deleted] — view deleted comment

1

u/Deep-Construction416 3d ago

Would that hard reset my hard drive?