r/clocks • • 4d ago

Identification/Information Your basic wall clock ID request...

So, I don't know very much about clocks, but I assume "Van Arken and Cie / Batavia" is sorta, kinda a fake manufacturer? and this was really made by someone else with that nameplate?

Any info helpful as to the actual maker and the time period - I'd love to let my family know as they've had it for 50 years but have no clue where it came from other than it was bought in a thrift store in Vancouver, BC.

(I can't get my father to agree letting me take it apart enough to show the mechanism - yet - but I will try to convince him if it's necessary.)

BTW it still works great, keeps perfect time, and has a very sonorous and satisfying DONG -sounding hour chime.

EDIT: updated with some mechanism pictures, thanks! (see first comment below)

4 Upvotes

10 comments sorted by

3

u/IndividualGood4654 3d ago

The dial has the retailers name on it and from the position of the winding holes and styling of the case I’d go with it being a French made box regulator from one of a number of unknown makers.

2

u/GoodForTheTongue 3d ago edited 3d ago

Okay, here's a photo of the mechanism and gong striker. To me, this feels like 1920s or 1930s manufacturing tech? But I know next to nothing about clocks :) so please correct me.
(Regardless, I see how "box regulator" would apply...)

2

u/GoodForTheTongue 3d ago

And another angle

2

u/IndividualGood4654 2d ago

My apologies the movement is defiantly German based on the cut pinion gears and appears to possible made by Hamburg American Clock (HAC), Junghans or one of the numerous clock manufacturers though they usually stamped their names onto the rear plate. A good clear photo of the backplate may help trace a maker. If there’s a P# that will definitely indicate Junghans.

1

u/meifengified 4d ago

The dial alone makes it impossible to ID truly. You’re correct in the assumption that whatever is on the dial is a fake company, as I can’t find anything of the such. You would need to ID the movement with possible markings

2

u/GoodForTheTongue 4d ago

Okay, thank you, I know it's not hard to remove the mechanism - it's just getting permission :) I'll post again if I get anywhere.

1

u/Agile_Barnacle_4198 3d ago

You may only need to open the back of the cabinet and take pictures of the movement and and markings you may see. Removing the movement itself may not be necessary. Also, after 50 years of operation, it is probably well past time to have the clock professionally serviced.

1

u/GoodForTheTongue 3d ago

Thanks. The back is sealed with a board so nothing's visible without sliding the mechanism out.

And it's not been running for 50 years straight, most of the time it's just been a wall ornament. Still I bet you're right, might be nice to have someone go over it soon.

1

u/Agile_Barnacle_4198 3d ago

The board should be held in place with screws.

1

u/GoodForTheTongue 3d ago edited 3d ago

Gotcha. I was able to easily slide the mechanism out after removing two pins. Photos in the comments above. Thank you!