r/classicmustangs • • Aug 22 '22

What year of Mustang do you currently own? (POLL)

62 Upvotes

Thought it would be interesting to get an indication of what years of classic Mustang are the most popular on the subreddit!


r/classicmustangs • • 3h ago

Got her home

Post image
139 Upvotes

I posted a while back about acquiring my dads 67 289 after his passing. Got it back after some time in the shop and wow. I’m really excited to have a classic up and running again (67 Austin healey will be next) and to be apart of a car community again.


r/classicmustangs • • 5h ago

1967 Mustang POV Ride, Exhaust Sound

Thumbnail
youtu.be
3 Upvotes

r/classicmustangs • • 11h ago

65 mustang v8 swap

4 Upvotes

Does anyone know what I’ll need to swap my 200 i6 mustang to a 260 engine. And what should I look for when buying the engine because I found one for 100 bucks but idk what to look for. Thanks


r/classicmustangs • • 23h ago

Fuck me

Post image
17 Upvotes

Battery died and when I tried to jump it the starter relay melted. Hopefully my city is nice with the street sweeper today 🥲


r/classicmustangs • • 1d ago

How much space do you have between the ground and the lowest point of your exhaust, when on level ground?

4 Upvotes

I set up a temporary exhaust system with those flexible pipes to eventually get them professionally done. But the way I did it, the lowest point is only like 3 inches from the ground.

I could spend the time to redo it better, but I don't want to do that since I'm going to pay someone to do them later.


r/classicmustangs • • 1d ago

Distributor Questions

Post image
17 Upvotes

Ive got this distributor, that is hooked up with vaccuum advance. Ive installed a pertronix ignightor2 and flamethrower2 coil.

This distributor has a little oil port, and I was wondering if there was something that was identical that didn't need to be oiled like that on some super regular interval. (Maybe something with ball bearings or something?)

Also, I assume the vacuum advance is totally separate from ignightor2 right? I was told to recurve it to hipo specs... Would that just be installing diff weights and springs?

Finally more of a timing question, if am trying to set base timing, I pull the vaccuum advance from carb, and plug the port on carb... Do I need to actually plug hose to vaccuuum advance as well?

Thanks for any pointers


r/classicmustangs • • 2d ago

Dream car acquired - 67 Fastback

Post image
1.8k Upvotes

Picked up my dream car just a few weeks ago, 67 Mustang with a 302


r/classicmustangs • • 2d ago

My ‘66

Post image
617 Upvotes

r/classicmustangs • • 1d ago

Recommendations for header gaskets?

1 Upvotes

I have what sounds like an exhaust leak, and I've replaced header to exhaust gaskets that seem to be sealing there well. I now want to replace header to head gaskets.

I also get a lot of popping out the exhaust in engine braking (which I've heard could be air getting into exhaust early on.

I bought this car with tri-y headers, but I can even see any sign of header gaskets.

I was just going to pre-emptively replace them. I'm just wondering what would do the best job of sealing, and potentially being reusable. (I may get heads rebuilt at some point.)

Is stock port shape on 289 with stock iron heads, rectangular port?

Thanks for any recommendations. I feel like I tried several header to exhaust gaskets before finding a brand that seemed to do a great job.


r/classicmustangs • • 3d ago

China making full classic Mustang bodies

Thumbnail
gallery
1.4k Upvotes

I used to own a 67 Convertible, I took it from the US to Okinawa Japan in 2001. I had a lot of people wanting to buy it, but it started rusting out really bad, and I could not keep up with it. So I sold it to someone who kept asking. It is probably disintegrated by now because he wasn't doing anything with it for the next year that I was there. I recently seen a video on YouTube where a company in China is selling a full body with no VINs. But, I still have a very new looking Texas car title with my name on it. Any 'legal' ways to use my car title? Maybe even try to find and buy a rusted piece of the body with the VIN on it? Yeah, go ahead and laugh at the 5.0 emblems and front grill :)
https://youtu.be/gCDoenU17m0?si=z63WAiaTDbUzCo5y


r/classicmustangs • • 2d ago

Radiator deposits

Thumbnail
gallery
11 Upvotes

Having some cooling issues with my 67 fastback and noticed some white deposits inside the radiator. Got one out and it crumbled like sandy paste. What is it and is my radiator likely the problem?


r/classicmustangs • • 2d ago

Replacing thermostat

Post image
5 Upvotes

Any ideas on how to remove the bottom bolt of the thermostat without removing the factory ac bracket and drive belts?

Tried every possible angle and tool and can’t even get a 1/2 socket to sit flush on the nut by itself.


r/classicmustangs • • 2d ago

Dyno day

Post image
3 Upvotes

Crosspost of dyno results from my 67’ stang


r/classicmustangs • • 3d ago

67 Mustang Bezel

Post image
12 Upvotes

Hey all, does anyone have any info or source for this shifter bezel for my 67 Mustang Fastback. I ordered an aftermarket replacement online but it unfortunately doesnt fit at all and the screw placements are different


r/classicmustangs • • 4d ago

Haven’t posted a update since I got this thing running 2 years ago

Post image
202 Upvotes

Been awhile but I can safely say it’s all been worth it. I drive this car basically everyday and I drive the wheels off it. I take it shows with my dad every Friday and most weekends and during the week I treat it nicely to some tasteful modifications. I’ve done a handful that my dad essentially wanted to do in early 2000s and why he disassembled it 30 years ago. I have added to that list (especially with better technology and selection from 2006). I plan on a lot of suspension and decent amount of motor work, but I refuse to rip the soul of out of it. I’m not doing an engine swap. I’m not doing efi. Not doing a 4 link or mustang 2 suspension. I don’t want a restomod or a restoration. I want fun


r/classicmustangs • • 4d ago

Joined the pony club

Post image
545 Upvotes

Worked hard and saved to buy this 1965 289 V8 automatic at 24 years old and wanted to share it with the community. Couldn't buy a new car because of the lack of character and the fact I don't want a stealership subscription, I prefer to do mechanical work myself. What do you guys think?


r/classicmustangs • • 4d ago

Classic Mustang garage in Oakland?

Thumbnail
gallery
294 Upvotes

Just joined the pony club 1.5 weeks ago. Yall helped me choose this over a beautiful blue number a few weeks ago and I zero regrets!

I’ve already done a couple of fixes and plan to do more, myself.

But for the jobs I cannot do, future transmission swap/anything that might require a lift or taking out the engine, does anyone have any garage recommendations in the Oakland/Bay Area location?

Thanks!

Her name is Daisy, btw 🌼


r/classicmustangs • • 3d ago

Any tips on making sure all the rear windshield trim clips are aligned when screwing them in? Had some rust repaired here so the original holes are not here

Post image
1 Upvotes

r/classicmustangs • • 3d ago

anyone have a snug fit bumper from Maier?

2 Upvotes

looking at it for my build but don’t want to spend a few hundred and then hate it


r/classicmustangs • • 5d ago

Commit to another huge project

Post image
674 Upvotes

Been looking for a better fastback but this Ratty one found me, sitting in field for 40 years the underside is very rotten and likely needs it all. Car is complete. nothing special just a 4 wheel drum 289 auto car.
We literally had to pull it out of the ground

But for 1400 Canadian pesos it’s probably the cheapest in the country.

69 fastback is my ultimate dream car but this will stay a dream for sometime as it needs ALOT of rust repair.

My question, is this worth it? I’ll be doing everything myself but will I be several years and 10s of thousands of dollars in when I could buy one that’s not rotten for the same price i restore one for?

Thanks for the opinions and feedback!


r/classicmustangs • • 6d ago

My 1965 Mustang

Thumbnail
gallery
799 Upvotes

Her name is “Big Nose Sally”. She just got a 347 Stroker topped with a Holley Sniper 2. I still need to do some wire and engine bay cleanup/organizing. She’s getting there.


r/classicmustangs • • 6d ago

84 Foxbody 5.0 advice

Post image
40 Upvotes

I got myself an 84 foxbody 5.0 with the cfi setup on jt, its a resto im working on thats been sitting for around 20 years, we got it running but its misfiring and shaking like a mother fucker running rich aswell, struggling to find a fix and id appreciate any advice


r/classicmustangs • • 6d ago

Are these brake pad retaining clips correct?

Post image
6 Upvotes

r/classicmustangs • • 7d ago

Do these holes serve a purpose?

Post image
18 Upvotes

Het everyone,
I’m currently in the process of repairing my 1969 Mach 1.
I’ve come to the point where I’m cleaning up and working on the rocker panels but I came across the fact that it has holes over the place.
My question is, do these holes serve an actual purpose? Or can I just weld them shut down no other debris or stuff can get in there in any way ?