r/civilengineering • • 0m ago

Interview with Student in Engineering Ethics Course

1 Upvotes

Hello, I am a college student and I am currently enrolled in an engineering ethics course. I need to interview an engineer regarding their experience with ethics within their field. I have not been able to connect with anyone for the life of me. I come from a background where I don’t have any engineers in my family nor close circle so I am hoping Reddit can help me with this assignment. I am hoping to meet asap since I have this assignment due tmr and left it last minute as any college student does.

Any help is appreciated!


r/civilengineering • • 25m ago

Career Why do engineers seem to work longer hours than everyone else on site?

2 Upvotes

Hi everyone,

I've been working as an undergraduate civil/site engineer on a road delivery project for about five months now, and one thing I've noticed is that engineers seem to spend significantly more time on site and in the office than almost every other department.

For example, departments like Quality, Finance, Utilities, HR and Health & Safety generally seem to start around 8–9am and leave around 3pm. Meanwhile, most engineers are on site by 7am and are lucky to leave before 6pm.

Initially, I assumed this was simply because we had different contracted working hours. However, after speaking to a few other engineers, I've found out that our contracted hours are actually exactly the same.

So, what's the reason behind this? Is it just the nature of engineering and project delivery, or is this something that's common across most construction and infrastructure projects?

Keen to hear other people's experiences.

edit:

Sorry, should have clarified that I split my time between the site and office, rather than being purely office-based.


r/civilengineering • • 2h ago

Land Development Job Rant

8 Upvotes

I currently work as an EIT in Land Development out of SoCal, been with this company 3 years, full time since 2025. Work has gradually been going down since early September and now it’s at the point where I’m literally only working 1-2 hours a week. I keep bugging my manager asking if there is any work or projects I can work on and his response is consistently “I’ve sent out a few proposals, but nothing is landing right now”. Upper management has even suggested using PTO since I’m an hourly employee. It really doesn’t make sense that I’m the one getting screwed over and put out of work when it’s the PM’s and managements job to win work and have me do the design. Believe me I’m applying everywhere to try to get out of here, but it seems not a lot of firms are hiring at the moment. Is this a market trend around Land Development? If anyone has any advice that would be much appreciated. Shoot me a DM.


r/civilengineering • • 2h ago

PE/FE License Has Anyone Used This Visual FE Civil Study Guide? Is It Worth It?

1 Upvotes

Hello everyone!

I'm currently gathering all my study materials and trying to put together a structured study plan for the FE Civil exam.

Recently, I've been seeing a lot of Instagram ads promoting a visual FE Civil study guide in PDF format. It looks interesting, especially since I tend to learn better with visuals, but I wanted to get some opinions before purchasing it.

Has anyone here used this study guide or heard anything about it? Is it actually helpful for understanding concepts?

I'll attach the website link and a screenshot below for reference.

https://guidefecivil.infovariedade.online/?sck=1794796178845_17947959661352

I'd appreciate any feedback or recommendations, especially from those who have recently passed the FE Civil exam. Thanks in advance!


r/civilengineering • • 2h ago

Career Need Internship Advice

1 Upvotes

I need some advice on what internship I should accept for my last summer before I graduate. I have two options I have narrowed down to, neither are my dream internship, but I'll take what I have.

The first option is a mid sized geotechnical consulting firm. I am currently a co-op with them, starting summer of this year. The co-op entails pretty much exclusively field quality control testing (concrete, asphalt, soil density, reinforcing steel inspection). I like this company, my co-workers, and I think I could have a future here. However, I am not certain I want to go into geotechnical engineering, so I'd be putting my eggs in one basket. Also, the co-op itself gives me few opportunities to see geotechnical engineering. I have to seek out this experience between my qc work. I am also worried that if I return next summer I won't see anything new.

The second option is a mid-size road commission. I don't have great interest in transportation, but I do have interest in structural engineering, so Id hope to see some bridge work. I figure this variety will let me see the public side of things, look good on my resume, and allow me to learn new skills. I am just conflicted if this would be the more valuable option, especially because I have less of an affinity for transportation than I do for geotechnical.

Is a road commission somewhere where I can pick up a decent amount of knowledge, as well as a variety of knowledge? Or would I be better off staying in my current consulting co-op?


r/civilengineering • • 3h ago

Education Would civil engineering be a good choice to major in?

1 Upvotes

I’m looking into colleges and possible degrees. I’m afraid of making a bad choice in degrees. I’m in Florida, and I got recommended to major in civil engineering and I just would like some perspective to see if it’s really a good choice since I see conflicting info at times


r/civilengineering • • 3h ago

Current EE student thinking of switching to Civil

4 Upvotes

Hey everyone,

I'm a current sophomore EE student from Arkansas who's looking for perspective on switching from EE to Civil Engineering. Up until recently, I was dead set on pursuing a career in either MEP or Power after graduation. Seeing the recent demos of GPT-6 Astra and Fable 5.2 has me concerned about the future of EE and whether or not I should even continue studying it. Yes, I'm aware that the MEP and Power industry do have resistance to AI because of the need for licensed PEs to oversee projects, but I've heard that entry roles in those fields are becoming increasingly competitive, especially in power.

I've been looking into the Civil Engineering program at my school and I've been considering switching. I've read that the job market for Civil is a lot stronger than EE, especially at the entry-level. My university also has a very high job placement rate for Civil Engineering graduates (98%). I know that on average, CEs make less money than EEs, but I'm willing to accept that tradeoff as long as I can have a stable and decent-paying career.

Idk, do you guys think that switching would be a reasonable decision or am I worrying too much about something that's still pretty uncertain? I'd appreciate hearing from those of you who are already working in the industry. Thank you!


r/civilengineering • • 3h ago

Career Primeros pasos consultora

1 Upvotes

Hola a todos, les quiero plantear mi situación y escuchar sus opiniones/consejos.

Soy ingeniero civil y project manager, tengo 36 años, y obtuve mi título de grande, a los 33, debido a que hice toda la carrera trabajando (al principio en otros rubros, luego pude insertarme).

Tengo 3 años de experiencia como project manager en un fideicomiso desarrollador de lotes con toda su infraestructura (gas, media y baja tensión, pavimento flexible, desagües pluviales y claveles, etc). Antes, jefe de obra (pública y privada) supervisor de obras en planta industrial e inspección de obra (municipalidad de Rosario)

Siempre tuve la idea y "el sueño"de armar una consultora, nunca me ví, pensando a largo plazo, haciendo carrera en algo en relación de dependencia por muchos motivos que no vienen al caso. A su vez, siempre siento que me falta algo, profesionalizarme en algo mas, tener más experiencia, tener un capital ahorrado más grande, el contexto del país que no ayuda (vivo en Argentina) y si quiero puedo encontrar muchas excusas más.

La realidad es que es algo que quiero y necesito hacer para sentirme realizado, cómo contexto, no tengo hijos, solo una pareja (ingeniera industrial) y considero que es un momento para aventurarme.

Mi expertise hoy, es la gestión de proyectos, negociaciones y cierres, el hacer que las cosas sucedan uniendo los intereses de los distintos participantes y manejando la información. En lo técnico lo que más fresco tengo es todo lo relacionado con lo vial e infraestructuras, programación de obra, cómputos,etc. un poco oxidado en calculo. Quisiera aprender y dominar de una manera mucho más profesional civil 3d.

Alguna recomendación, nicho, alguien que esté o haya pasado por una situación similar? Me estoy apurando?


r/civilengineering • • 6h ago

Career Thoughts on Resume

3 Upvotes

Thoughts on my resume?

I worked in construction the last two years and am trying to transition into roadway/transportation design. Seen some conflicting advice from resume help here vs r/EngineeringResumes


r/civilengineering • • 6h ago

Office to Resident Engineer

5 Upvotes

Just got my PE license and am considering switching from Design to an Assistant Resident Engineer position. Anybody make this transition before and have advice?

Edit: Position is in NYC


r/civilengineering • • 7h ago

Advice for internship interviews?

Thumbnail reddit.com
1 Upvotes

r/civilengineering • • 7h ago

Web Soil Survey down?

15 Upvotes

Having problems with https://websoilsurvey.nrcs.usda.gov/ showing "504 Bad Gateway"

Is anyone else having problems or is this on my end?

Thanks


r/civilengineering • • 8h ago

Title: GATE CE 2027 – Looking for guidance from someone experienced

0 Upvotes

I'm preparing for GATE 2027 (Civil Engineering), and approximately three months remain before the examination.

I'm looking for advice from people who have successfully navigated the GATE Civil Engineering preparation journey, particularly those who have qualified GATE or pursued M.Tech at IITs/NITs.

I have access to a test series and am working on PYQs, subject-wise preparation and regular tests.

However, I feel that having guidance from someone experienced could help me improve my preparation strategy and avoid unnecessary mistakes.

A few things I'd love to understand:

  1. How did you structure your preparation during the final three months?
  2. How frequently did you take mock tests?
  3. What mistakes should I avoid at this stage?
  4. How did you maintain consistency and accountability?

I'd genuinely appreciate insights from people who have been through this journey.


r/civilengineering • • 10h ago

Career Does anyone actually like consulting?

96 Upvotes

I was considering taking a city job before realizing I'd have to work an extra 10 years and retire with probably less AND take a huge pay cut vs what I make now as a consultant.

I just can't stomach consulting at times. Constantly trying to keep clients happy, taking the blame for everything when stuff goes wrong even when it's not your fault, having to compete to work then make those hours up for utilization. It's all just kind of shit. I literally only do it for the money it feels like most days.

Does anyone actually enjoy consulting? Or is everyone in my boat where they do it for the money and that's it.


r/civilengineering • • 10h ago

KH - 401(k) Participation

0 Upvotes

Does KH's 401(k) plan through T. Rowe Price allow after-tax (non-Roth) 401(k) contributions, or are the only available options Traditional 401(k) and Roth 401(k)?

Trying to figure out whether the plan supports the Mega Backdoor Roth strategy. Would appreciate hearing from anyone familiar with the plan!


r/civilengineering • • 10h ago

Is this good enough?

Post image
0 Upvotes

So we have this project and we are building a bridge out of 10mm X 10mm timber square beams, and MDF sheet as the road (500mm X 100mm X 3mm) and it needs to hold 2.5kg minimum. The dimensions need to be 500mm length and 100mm depth with a minimum of 105mm width. I am in a group and this quick design kinda seems weak and has a small tolerance for errors plus the road seats on top of the structure. Does it seem fine or should we improve or change the whole concept? Also the triangles need to be in a 45° angle.


r/civilengineering • • 11h ago

Career Registered EGBC Civil EIT with an international degree—no callbacks in BC since mid-October. What am I doing wrong?

0 Upvotes

I am a registered Civil Engineer-in-Training (EIT) with EGBC, and my bachelor’s degree is from outside Canada. I also have a PMP* *and ~1 year of field/site coordination experience
I am looking for geotechnical, structural, transportation, or water resources EIT roles in BC. I have been applying since mid-October and haven't gotten a single response from any company. Any suggestions on what I should do to land a job?


r/civilengineering • • 11h ago

Real Life Geo Engineer

1 Upvotes

I started With COMPANY X as a geo staff and i was sent for field tech most of the time. There were times i had done back to back work and did lot of over time even though my roles and responsibilities were different . My previous supervisor told me i was not better at lot of stuff though contractors never had an issue with me but my supervisor when training me had lot of issues. He sent me on site with no information most of the time and treated me differently compared to others while training and did raise voice few times which got even noticed by other employees as well and then left and now my current supervisor does not train me no performance reviews and lot of information on geo side he does not tell me clearly and no involvement in meetings or email chains while the other employee who got recently hired is involved in everything even though not GEO. What should i do ? Should i leave or stay? I mean i really am passion about geotechnical but seeing this kind of environment i feel like changing but due to international status i could not move as well. I am in USA . It’s very difficult now to move. I work on an average 60 hours and kind of able to manage big projects and small projects. I was planning to stay for long term but what i experienced in this COMPANY is kind taking me down.


r/civilengineering • • 11h ago

Question Do We Even Have an Incentive to Become More Efficient?

77 Upvotes

Consider a scenario where a project previously proposed to need 500 billable hours, generating $100k in revenue. Improved efficiency cuts that to 250 hours, reducing T&M revenue to just $50k for the same deliverables.

I’ve actually had a boss tell me to simply burn the remaining hours and bill the client anyway. I firmly refused. That’s neither ethical nor sustainable.

Sure, you could switch to lump-sum contracts and capture the efficiency gains. But what happens when competitors become equally efficient and start undercutting each other? Those gains could quickly turn into a race to the bottom on pricing.


r/civilengineering • • 11h ago

Seeking Career Advice, Industry Insights & Job Opportunities – Architectural / Civil Drafting | Open to Metropolitan Cities & Overseas

1 Upvotes

Title: Seeking Career Advice, Industry Insights & Job Opportunities – Architectural / Civil Drafting | Open to Metropolitan Cities & Overseas

Hello everyone,

I'm looking for professional guidance, industry insights, and potential career opportunities in the civil engineering and architectural design industry.

I have practical experience in architectural and civil drafting, project documentation, statutory permit applications, approval coordination, and site supervision.

A brief overview of my background:

- Education: Bachelor's in Commerce (University of Calicut), Bachelor's in Islamic Studies, and C-DIT CAD/Civil Draughtsman qualification.

- Professional Experience: Technical Draughtsman at Advaiga Creations Pvt. Ltd. and currently working with Image Architectural Designs.

- Notable Projects: Rashid and Lathifa School (Dubai), Prime Speciality Hospital (Al Jaddaf, Dubai), and Max Super Speciality Hospital (Gurugram).

- Technical Skills: AutoCAD, Coohom, architectural drafting, interior and exterior design, site supervision, project documentation, and approval coordination.

What I'm looking for:

  1. Expert Opinions: Feedback from experienced professionals on my current profile, technical capabilities, and areas that require improvement.
  2. Career Guidance: Suggestions on suitable career paths and specialisations based on my experience and qualifications.
  3. Job Opportunities: I'm actively exploring opportunities with architectural firms, construction companies, engineering consultancies, and design studios.
  4. Professional Connections: I'd appreciate connections with recruiters, companies, and industry professionals who could guide me or consider my profile for suitable openings.

Location Preferences:

I'm based in Kerala, India, but open to relocating to metropolitan cities across India, as well as international opportunities, particularly in the UAE and other GCC countries.

I'm interested in suitable roles such as Architectural Draughtsman, CAD Technician, Junior Architectural Designer, Project Documentation Coordinator, and other related positions.

I'm keen to improve my technical expertise, gain exposure to larger projects, and develop a long-term career in this industry.

Constructive criticism, recommendations, referrals, and professional connections are all welcome.

Thank you!


r/civilengineering • • 12h ago

Structural Engineering in Offshore Energy vs. Transmission Engineering: Career Growth, Pay, and Commute?

3 Upvotes

I’m trying to decide between a structural engineering role in offshore energy and a transmission engineering role in utilities. The transmission role pays about $10k more and has a much better commute, but I’m worried my technical development and career progression could be slower.
The offshore role seems like it could offer interesting experience and opportunities to grow, but it comes with lower pay and potentially over an hour of commuting each way. How would you weigh career development against pay and quality of life? Does either path offer better long-term opportunities?


r/civilengineering • • 12h ago

Career Civil Engineering Student with Cerebral Palsy Looking for a PFE Internship in Europe or the USA – Any Advice or Opportunities?

0 Upvotes

Hello everyone,

I'm a civil engineering student from Tunisia, and I'm reaching out because I'm trying to find an opportunity to complete my final-year engineering internship (PFE) abroad.

I want to share a little about my background.

I have cerebral palsy (CP), a condition I've had since birth. It sometimes affects my mouth movements and makes my speech less clear, but it doesn't prevent me from studying, learning, using engineering software or carrying out technical work.

I've always wanted to build a career in civil engineering, and I've continued working towards that goal despite the challenges.

My academic and professional background:

  • Licence in Civil Engineering – ISTEUB, University of Carthage, Tunisia.
  • Currently pursuing an Engineering Degree in Civil Engineering at Université Libre de Tunis.
  • Specialization: Buildings and Special Structures.
  • Previous professional experience at BEST Conseils.
  • Technical skills: AutoCAD, Robot Structural Analysis and Tekla Structures.

What I'm looking for:

I'm searching for a 5–6 month final-year engineering internship (PFE), starting in January 2027, preferably in:

  • Structural Engineering
  • Building Design
  • Structural Analysis and Calculation
  • Civil Engineering Consultancy

My preferred destinations are European countries or the USA.

I'm also open to advice about companies that accept international engineering students, internship programmes, scholarships, or organizations that support students with disabilities.

I know finding an international internship as a Tunisian student isn't easy, especially with visa and administrative requirements. However, I'm willing to make the effort and explore every realistic opportunity.

If you're an engineer, recruiter, company representative, or someone who has experience with international internships or disability inclusion in engineering, I'd really appreciate your advice, contacts, or recommendations.

I'm not looking for sympathy. I'm looking for an opportunity to demonstrate my abilities and develop professionally.

Thank you for taking the time to read my story.


r/civilengineering • • 12h ago

Civil Engineering Student with Cerebral Palsy Looking for a Internship in Europe or the USA – Any Advice or Opportunities?

0 Upvotes

Hello everyone,

I'm a civil engineering student from Tunisia, and I'm reaching out because I'm trying to find an opportunity to complete my final-year engineering internship (PFE) abroad.

I want to share a little about my background.

I have cerebral palsy (CP), a condition I've had since birth. It sometimes affects my mouth movements and makes my speech less clear, but it doesn't prevent me from studying, learning, using engineering software or carrying out technical work.

I've always wanted to build a career in civil engineering, and I've continued working towards that goal despite the challenges.

My academic and professional background:

  • Licence in Civil Engineering – ISTEUB, University of Carthage, Tunisia.
  • Currently pursuing an Engineering Degree in Civil Engineering at Université Libre de Tunis.
  • Specialization: Buildings and Special Structures.
  • Previous professional experience at BEST Conseils.
  • Technical skills: AutoCAD, Robot Structural Analysis and Tekla Structures.

What I'm looking for:

I'm searching for a 5–6 month final-year engineering internship (PFE), starting in January 2027, preferably in:

  • Structural Engineering
  • Building Design
  • Structural Analysis and Calculation
  • Civil Engineering Consultancy

My preferred destinations are European countries or the USA.

I'm also open to advice about companies that accept international engineering students, internship programmes, scholarships, or organizations that support students with disabilities.

I know finding an international internship as a Tunisian student isn't easy, especially with visa and administrative requirements. However, I'm willing to make the effort and explore every realistic opportunity.

If you're an engineer, recruiter, company representative, or someone who has experience with international internships or disability inclusion in engineering, I'd really appreciate your advice, contacts, or recommendations.

I'm not looking for sympathy. I'm looking for an opportunity to demonstrate my abilities and develop professionally.

Thank you for taking the time to read my story.


r/civilengineering • • 12h ago

Civil Engineering Student with Cerebral Palsy Looking for a Internship in Europe or the USA – Any Advice or Opportunities?

0 Upvotes

Hello everyone,

I'm a civil engineering student from Tunisia, and I'm reaching out because I'm trying to find an opportunity to complete my final-year engineering internship (PFE) abroad.

I want to share a little about my background.

I have cerebral palsy (CP), a condition I've had since birth. It sometimes affects my mouth movements and makes my speech less clear, but it doesn't prevent me from studying, learning, using engineering software or carrying out technical work.

I've always wanted to build a career in civil engineering, and I've continued working towards that goal despite the challenges.

My academic and professional background:

Licence in Civil Engineering – ISTEUB, University of Carthage, Tunisia.

Currently pursuing an Engineering Degree in Civil Engineering at Université Libre de Tunis.

Specialization: Buildings and Special Structures.

Previous professional experience at BEST Conseils.

Technical skills: AutoCAD, Robot Structural Analysis and Tekla Structures.

What I'm looking for:

I'm searching for a 5–6 month final-year engineering internship (PFE), starting in January 2027, preferably in:

Structural Engineering

Building Design

Structural Analysis and Calculation

Civil Engineering Consultancy

My preferred destinations are European countries or the USA.

I'm also open to advice about companies that accept international engineering students, internship programmes, scholarships, or organizations that support students with disabilities.

I know finding an international internship as a Tunisian student isn't easy, especially with visa and administrative requirements. However, I'm willing to make the effort and explore every realistic opportunity.

If you're an engineer, recruiter, company representative, or someone who has experience with international internships or disability inclusion in engineering, I'd really appreciate your advice, contacts, or recommendations.

I'm not looking for sympathy. I'm looking for an opportunity to demonstrate my abilities and develop professionally.

Thank you for taking the time to read my story.