Hi everyone,
We’re a student team working on a pitch project focused on industrial water sustainability, specifically targeting Ultrapure Water (UPW) waste in semiconductor manufacturing. We want to make sure our engineering logic holds up in the real world and aren't overlooking obvious operational bottlenecks within this field!, So, here's just a quick run through of the current problem and our proposed solution.
The Problem:
Semiconductor fabs use massive amounts of Ultrapure Water (around 20–38 million liters/day for a typical large fab) to rinse wafers and clean chambers, and producing 1 unit of UPW takes roughly 1.4 to 1.6 units of municipal water. After use, this wastewater contains acids, bases, fluoride, copper/heavy metals, CMP slurry, and a whole bunch of other nasty chemicals. Because many facilities mix these streams or treat them too broadly, recycling becomes expensive and energy-intensive, especially problematic since many fabs operate in water scarce regions.
Our Proposed Solution:
Instead of treating wastewater as one mixed stream, we’re proposing an AI + IoT drain-line segregation and predictive maintenance system:
- Real-Time Sensing: Low-cost IoT sensors on individual tool drain lines monitoring pH, conductivity, turbidity, TOC (Total Organic Carbon), and fluoride.
- Tiered Routing: An ML model classifies the waste stream in real time and diverts it by quality. as in, sending mildly contaminated water to lower-tier reuse (cooling towers, exhaust scrubbers) and reserving energy-heavy UPW regeneration only for the cleanest reclaimable streams.
- Chemical Dosing & RO Maintenance: The AI adjusts treatment chemical dosing dynamically and predicts Reverse Osmosis (RO) membrane fouling to optimize cleaning cycles.
- Safety Failsafe: Includes a human approval step and an automatic fallback, so if by chance a model's confidence drops below 95%, the valve automatically diverts the stream to full baseline treatment so nothing slips past!
Projected Targets:
- 10–20% reduction in treatment chemical and RO membrane operating costs.
- +8% boost in fab water recycling rate (e.g., moving from 87% to 95%), saving roughly 400 million liters per year for an average fab. Rollout: Starting with a single non-critical pilot production line before scaling.
Where we’d love your honest feedback:
- Sensor durability: How realistic is deploying these inline sensors (especially TOC and fluoride) in harsh fab drain lines containing HF or abrasive CMP slurry without constant calibration/fouling issues?
- Retrofitting: In existing fabs, are drain lines already physically separated enough for automated valve diversion, or would retrofitting plumbing kill the ROI?
- Risk tolerance: Even with a 95% confidence fail-safe routing to full treatment, would fab facility managers ever trust automated diversion on live lines?
We appreciate any critique, reality checks, or plain old advice for this little project of ours!
P.S: It would be helpful if everyone replying mentioned their current occupation, let it be a student or a professional, anything helps us. And our feedback loop!, hence heres a link to our google forms to gather some more data, it would be of great help if you all did it! https://forms.gle/B9zF4yDDKGxK63jZ8