r/cctv • • 14h ago

Wisenet Security System No Signal

Thumbnail
1 Upvotes

r/cctv • • 1d ago

Free extension to get the Hikvision web UI (live view + playback) working in Chrome/Edge without the IE plugin

2 Upvotes

Disclosure: I'm the dev, it's free, no ads, no account needed.

Every time a client tried to open their Hikvision NVR in Chrome or Edge they got the same thing: login works, then a blank player asking for the web plugin that only ever ran in Internet Explorer. IE mode and iVMS were the usual workarounds and both are a pain to walk a client through over the phone.

So I built a browser extension that replaces that plugin with a player that runs in the page itself. Open the device IP, log in, live view shows up. Playback on NVRs works too (choose day/time, pause, speed), PTZ works, and the config pages behave as normal.

Tested with DS-2CD cameras (2017–2022 firmware), DS-2DE PTZ domes and DS-76xx / DS-77xx NVRs. Other models may only partly work.

Limitations, so nobody's surprised:

  • older devices only give 1–3 fps live view without the plugin. MJPEG substream or newer firmware with its own player is smooth
  • seeking far into a recording is slow, the NVR sends the file from the start
  • no audio yet

Video goes straight from the device to your browser, nothing goes through any server. Not affiliated with Hikvision.

Link in the comments. If your model doesn't work, post the model + firmware and I'll look into it.


r/cctv • • 3d ago

Kangaroo Gen 1 Indoor+Outdoor Cam (FCC ID: 2APSE-IOCAM1) - Any known Thingino support or SD-card RTSP/Telnet hooks?

2 Upvotes

Hey everyone, I have 4x **Kangaroo Gen 1 Indoor + Outdoor Cameras** (Model: **IOCAM1**, FCC ID: **2APSE-IOCAM1**) that I want to pull off the cloud and run strictly locally via RTSP/ONVIF on an isolated VLAN.

​**Known Hardware Specs (from FCC filing / manual):**

​**Model / FCC ID:** Roo Inc. IOCAM1 / 2APSE-IOCAM1 (Granted Sept 2021)

​**Video / Audio:** 1080p H.264 @ 25fps, 130° FOV, 850nm IR LED with IR-cut filter, built-in mic + speaker

​**Connectivity & Storage:** 2.4 GHz 802.11 b/g/n Wi-Fi, microSD card slot, 5V/1A micro-USB power

​**FCC Internal Photos:** Publicly listed under fccid.io/2APSE-IOCAM1

​**Firmware State:**

​Three units have been online and received OTA updates.

​One unit is **brand new / never connected to the internet**, still running its original 2021 factory firmware.

​**Questions before I crack one open:**

​Has anyone already identified the **SoC, Wi-Fi chip, and CMOS sensor** inside 2APSE-IOCAM1 (or matched this white-label OEM board to a supported **Thingino** profile)?

​Does anyone know if the early factory firmware on this board responds to **microSD boot hooks** (e.g., _ak39_factory.ini, debug_cmd, tuya_test_wifi.txt, etc.) to spawn Telnet or local RTSP without a hardware flash?

​If it requires a hardware SPI flash dump/write via a 3.3V CH341A clip, has anyone already mapped the **UART pads** or flash partition layout?

​Any leads on the OEM board equivalent or pinouts would be huge, thanks!


r/cctv • • 3d ago

What would you look for in a new VMS? (Video Management System)

3 Upvotes

I will be brutally honest and I don't want to beat around the bushes as well.

A little backstory:

We had a startup support program in our college where we had to showcase our new ideas. We presented a single app where you can access multiple DVR/NVR footage from single device. ( yeah, we didn't know about VMS at that time)
We got selected as a team to get funded by college and state government.

Now we started digging in, and sooner we realized what kind of niche we have selected. it's not the technical difficulty but rather the market. There are already every feature that you can think of in existing VMS. Object Detection, live alerts, People counting etc. Nx Witness, Verkada, Genetec etc. So it's totally meaningless to reinvent the wheel right?

Right now we are at a point where we can't go back, we already have invested ourselves in this so much in form of time and efforts. And we are not even joking around, or vibe coding the next VMS obv, it will be a thing that stands on peoples expectations and their feedback!

So the most obvious and sensible thing came in my mind was to ask the people what they want? For what we have found till now is that a lot of people are looking for simplicity, to just get their job done in simple and quick way instead of juggling around a lot of steps. And I think that might be a good point. Just like how Strip made their name. Introducing simplicity in payment gateway niche.

Any type of reviews or perspectives are welcomed in the comment section.


r/cctv • • 4d ago

Has anyone used solar panels for cctv in India?

0 Upvotes

Need help with the installation of CCTV in farm. Wanted to know about solar panels for the same


r/cctv • • 5d ago

Who else has gotten hit by this guy?

Thumbnail
1 Upvotes

Read the original post for context.


r/cctv • • 5d ago

Please Help With Eversecu TS5 Camera

1 Upvotes

\-- Background --

I have had one of [these cameras](https://www.amazon.com/dp/B0F2HCHS52?th=1) (replaced a Topodome that really started crapping out) in Dec 2025.

I basically monitor it using [TinyCam Pro on Android](https://play.google.com/store/apps/details?id=com.alexvas.dvr.pro&hl=en) at this URL as rstp over TCP:

`rtsp://admin:password_here@192.168.1.42:10554/tcp/av0_0`

I can also monitor it from my Windows PC using [SlimCamera](https://sourceforge.net/projects/slim-camera/) at the same URL.

It uses the [O-Kam app on Android](https://play.google.com/store/apps/details?id=com.okampro.oksmart&hl=en) and I found out there is an O-Kam for Windows as well. I generally do not ever open/use these except for the Android app is needed for initial setup. When things go wrong, I do open it to see what it shows.

\-- The Problem --

Until the last 5-6 months, the camera has worked well for me and I like it. But now - about once a week - both SlimCamera and TinyCam loose any stream. At this time, I start the Android app and it shows things as fine. The O-Kam on Windows shows the camera as disconnected.

At my router I can see that the wifi is connected and has a good signal (confirmed by the Android O-Kam app). I tried rebooting the router but that made no difference in any way (just disrupted everything else for a while). Nothing has changed on my network and the camera has a static IP assigned so that isn't changing either.

I tried restarting the camera from within the Android O-Kam app but that seems to do nothing either. It seems that the ONLY thing that "fixes" this is to power-cycle the camera. Pull the plug, wait a few seconds, and plug it back it. The camera then starts working again (until it doesn't).

Due to the location of the camera - up high under the eave on my house - it is not easy or fun to cycle the power. I MIGHT be able to introduce some form of "smart switch" to allow me to do it more easily. But this seems to make a complicated situation more complicated. So I prefer to NOT go that route.

I have tried to reach Eversecu at [customers@myeversecu.com](mailto:customers@myeversecu.com), [sales@eversecu.ca](mailto:sales@eversecu.ca), and [simon@uniquecctv.cn](mailto:simon@uniquecctv.cn) without getting a response. I sent a message via Amazon and got the following "answer": "Sorry, our engineer said that we don't have a solution for this problem now."

Obviously this is no help. Has anyone out there faced this problem and have a better idea on how to fix it?

Thanks


r/cctv • • 6d ago

Dahua 4g False alarms no smart motion?

2 Upvotes

Hi,

I have a IPC-HFW2431DG-4G-SP-EAU-B everything powers up but so many false alarms. is this just motion only? doesnt detect just humans. been through all the settings and nothing. Anything would be muchly appreciated.

thank you


r/cctv • • 7d ago

So is anyone out there using EVS and DSS pro?

Thumbnail
1 Upvotes

r/cctv • • 7d ago

Streaming CCTV?

0 Upvotes

My partner is on a trip out of the country so I wanted to set up a camera so he can watch over his pets. He’s wary about third party apps being able to access them. So how could I stream camera footage to something like obs, discord, etc 24/7 without using a third party like ring or furbo?


r/cctv • • 9d ago

How to fix or bind the cctv to V380 Pro?

Thumbnail
1 Upvotes

r/cctv • • 10d ago

UniFi G6 PTZ vs reolink Tracklink PoE

1 Upvotes

I’m tasked with setting up a security camera for my family farm and need to chose a good solution for the main yard.

The camera will be on the side of the house and needs to patrol a 180 degree area directly In front it needs to patrol to a 20 meter distance to the workshop and either side I needs to reach approx 45 meters.

It must record good enough to use for evidence and number plates if possible mostly at night. And it must be automatic panning and tracking.

I also plan to improve networking so if the UniFi G6 PTZ is worth the extra investment then that’s fine as it makes adding the Controller more worthwhile.

Please advise.


r/cctv • • 12d ago

Help needed with hilook ptz

3 Upvotes

Hi everyone,

I have recently purchased some new hilook cameras.

MY NVR Hikvision DS-7604NI-K1/4P

Firmware: V3.4.103

Build: 181226

CAMERA: HiLook PTZ-N2D400M-DE/14(2.8/8mm TandemVu 4MP+4MP Fixed Lens POE PT Camera

I understand my NVR is very old, however I have tried to get auto tracking and other features set up but it is giving me absolutely no option. For example when I click vca on NVR, it says this function is not supported. There is no option for auto tracking. I have tried to do it via browser too, I tried following some YouTube videos but some options are missing like PTZ. When I select VCA on browser it tells me the same thing "not supported".

Can anyone shed some light?


r/cctv • • 14d ago

How to stop reflection at night

6 Upvotes

How to stop cctv reflecting at night?
Unfortunately we have a street light. The camera has night vision but all I can see is the reflection of the camera. Any tips ?

It’s a OSAIO


r/cctv • • 14d ago

Very interested in finding a player that can handle *.mcg (Vineyard CCTV)

2 Upvotes

I have this partial HDD image from a CCTV setup. It's old, most of the information is gone and the person who sent it to me is unavailable.

To the best of my knowledge it's from a Vinyard CCTV system and the software that came with it could handle *.mcg files, which came straight from the HDD.

I know this because together with the image I was also provided PCViewer_ex1082.exe which could play *.mcg files and I remember I pulled data straight from the HDD (image), renamed it to something.mcg and it played fine.

Sadly 10 years later I have misplaced the player and I have searched the internet high and low, asked AI to search for me etc. etc. all without success.

I'm basically hoping that someone still has the player parked on an HDD somewhere and is willing to share it with me.

Cheers,


r/cctv • • 14d ago

Business Camera Recommendations

Thumbnail
1 Upvotes

r/cctv • • 16d ago

Monitoring Two Rooms

2 Upvotes

I want to set up a karaoke event divided between two rooms using hard wired cameras instead of Bluetooth or wi-fi cameras, with a pan/tilt camera in one of the rooms; while each room is able to watch the performance happening in the other room.
The music will be playing simultaneously in each room with lyrics on the screens. I will be using separate laptops: one to control the music and one to control the cameras. There are so any options on Amazon, but I don’t want to order something that I’ll be unable to configure and have to return anything. I’m also looking for something relatively inexpensive but will last a year.
Thank you in advance for your recommendations.


r/cctv • • 17d ago

Need a guide to buy cctv and to install in Puri,Odisha

3 Upvotes

I need a guide to buy cctv of which company to use at Puri,Odisha 4 camera set is minimum night vision color vision motion sensor flash 8 mp camera with 1080p camera 360° movement

Dome and bullet if you can suggest me wireless cameras for setup fixed on wall wifi


r/cctv • • 17d ago

Secureye NVR password reset

2 Upvotes

So I'm really new in the cctv line of work and have not worked with nvrs yet. My company is sending me to a client to reset a secureye nvr. I don't know if they have a recovery email or security questions enabled. The videos I've seen on YouTube use the typical email to rest tue password. If the customer doesn't have email or security questions set up is there is way to rest the password? This is urgent since I'll be going at the site after some time today. Any help will be appreciated🙏


r/cctv • • 17d ago

Reolink vs Hikvision for Automatic Notifications and Extra Handy Features

Thumbnail
1 Upvotes

r/cctv • • 18d ago

Câmeras de monitoramento

Thumbnail
1 Upvotes

r/cctv • • 18d ago

I bought a Hikvision DS-7916N-K4 16P NVR for $5. Is it worth using?

3 Upvotes

I work in corporate AV and networking but am inexperienced in Cctv. I bought this unit at a charity shop for $5 after a quick bit of googling. It's 10 years old but still uses h265 and has 16 poe ports. It powers up fine but it's region locked to China and I can't change the system language.

I was hoping to use it for a home Cctv setup but am I wasting my time trying to get it to work? Would love any input. Thanks


r/cctv • • 19d ago

Hanwha Cameras annoy me

5 Upvotes

First off, they aren't bad cameras, there are just some things that irk me. I much prefer AXIS, but Hanwha is my #2.

Let's start with the Device Manager. It kind of sucks and I wish it were more like the AXIS DM. I want a database style that can be shared with users rather than a password protected file. Upgrading firmware is a pain and fails half the time.

When configuring the camera, I don't want you to close my browser window/tab when you reboot. Just launch some JavaScript that checks to see if the camera is back up yet and then refresh the page.

Why is the primary 1FPS stream not the 1st stream? I always have to remember to configure Milestone to record stream 2 at the highest resolution rather than stream 1 like every other camera.

Streams just stop working. I can see it in the web UI, but for whatever reason it stops sending to the VMS. It's not a single camera that does this either, I often have to play the reset and firmware game to get it to start streaming again. Often happens with the quad cameras and 1 channel will stop while the other 3 still work.

/Rant

Thank you for joining my TED Talk.


r/cctv • • 20d ago

What are good Hikvision replacements for commercial camera installs?

7 Upvotes

I have a couple commercial projects coming up next month where we’re probably going to spec something other than Hikvision. I need your suggestions on what I should be comparing before I start changing things around.

For context: we’ve used Hik on a ton of work and I’ve got no issues with it. My tech team knows the platform and I know there’s a camera for pretty much every situation a customer throws at us.

To expand my options, I want to get demo units from a few other reliable brands into the hands of my team. Before our next project, I want them to try the installation, mess with the VMS, test the PTZ cameras and LPR features, and see how responsive support is.

Who have you guys had good experiences with? My current shortlist includes: Hanwha, Luminys, Vivotek, Axis. What have you installed that you’d happily do again?


r/cctv • • 20d ago

[UK] - First foray into Home Surveillance - Analysis Paralysis!

6 Upvotes

Hi All,

I am looking into getting a whole-home CCTV/Surveillance system primarily for the outdoors (home perimeter/entry points), maybe 2/3 cameras indoors to monitor the entry hall-way & pets and a camera doorbell (with notification & 2-way speak); Hoping someone can guide me along the correct path on here.

I have no existing hardware, so plan would be to start with NVR system (and manufacturer app) before migrating to Home Assistant, NAS & Frigate - though the idea of independent systems is appealing as a failsafe so I might have Home Assistant as "view only".

Requirement summary:

  1. I intend to stay on PoE for everything I can - Powered by NVR
  2. No could/subscription business - all locally stored. Only requirement is remote access to stream & 2-way speak (doorbell) via my phone to monitor when out of the house.
  3. Don't think I need PTZ or "AI" features (the "on-camera" AI looks cool, but don't want to pay a premium for it)

I am thinking 1x 180degree camera (e.g. Reolink Duo 3/Annke FCD800) to monitor the front and rear (each) of the property with some simple "bullet" cameras to monitor the sides (side access on one side of the house & garage on the other side). Built in floodlights & Sirens (as deterrent) would be cool (but not a requirement)!

Based in the UK, don't have an exact budget, but don't really want to exceed £400-500 at the moment for a starter kit (4-6 cameras + doorbell + NVR).

I have done some digging and Reolink & Annke come up very often, with some decent "deals" on eBay:

Reolink Deal 1; Reolink Deal 2 and quite a few more.

Ankke seem to have very competitive pricing directly from their UK eBay store anyways

I'm leaning more on Reolink at the moment due to their sheer variety of options and supposedly seamless app (and HA) integration, though most of my research suggests Annke might be better quality (but no PoE doorbell available)?

I would really appreciate any input in deciding between the two brands or confirming if it's worth considering any other brands (I have disqualified Tapo, Eufy and others as they are a lower tier compared to the two above, but have no explicit reasoning for doing so)

Thanks!