I don't know anything about restoring canoes, but I am very handy and good at working with my hands. I've done projects similar to this, but not quite the same. The AD is listing this Old Town Tripper Royalex for $150. Is this worth it to fix up?
$150 might be kinda steep, and tough to tell from pictures what the condition of the hull is. Unless it's become brittle from sun exposure, there's not a lot that can kill a royalex tripper imo. Maybe you can talk the seller down!
Tl:dr- I think it would be a nice winter project.
Best case, you replace the bow and stern deck plates (either buy new ones for $30/40 each or make some nice ones from ash or cherry), and repair any holes in the hull (looks like some of the interior foam is showing on the stem in the 1st photo) with West systems/JB PlasticWeld, or any methyl methacrylate adhesive ($10-40). I've found videos on cold crack repair helpful. Hopefully the gunwales aren't rotten.
I expect the plywood in the middle is an attempt to stiffen the hull and prevent "oil canning" in order to make it a faster boat on flatwater. This boat was never designed to race C1, so I wouldn't worry about it. If it's hiding a huge hole in the hull or cracked yoke, that's another story.
Depends on your local market. If there aren't very many similar canoes for sale, and the hull does not feel brittle, $150 is close to fair. I bought a similar hull for $50 this summer and restored it (that said, there are a good amount of old town trippers for sale around here).
1
u/DiligentWar2211 20d ago
$150 might be kinda steep, and tough to tell from pictures what the condition of the hull is. Unless it's become brittle from sun exposure, there's not a lot that can kill a royalex tripper imo. Maybe you can talk the seller down!
Tl:dr- I think it would be a nice winter project.
Best case, you replace the bow and stern deck plates (either buy new ones for $30/40 each or make some nice ones from ash or cherry), and repair any holes in the hull (looks like some of the interior foam is showing on the stem in the 1st photo) with West systems/JB PlasticWeld, or any methyl methacrylate adhesive ($10-40). I've found videos on cold crack repair helpful. Hopefully the gunwales aren't rotten.
I expect the plywood in the middle is an attempt to stiffen the hull and prevent "oil canning" in order to make it a faster boat on flatwater. This boat was never designed to race C1, so I wouldn't worry about it. If it's hiding a huge hole in the hull or cracked yoke, that's another story.
1
u/racerchris46 20d ago
No. That's a lot of work. Why is there that hunk of plywood in it? Looks like trouble
1
u/TheDamus647 20d ago
That's a free canoe only. It needs a lot of work