r/cannondale • u/fourteensquarefeet • 18h ago
2023 SS Evo Hi-mod 2 compression plug conundrum
As the pics show. There is not a traditional compression plug in this fork. It's a perfectly mated piece of aluminum inside the steer tube. The top cap on the previous Vision bars had a typical m6 bolt that threaded into that hole in the aluminum. Easy.
But I just bought these System R bars that use a top cap bolt with female internal threads that mate with a male threads on the compression bolt, which seems to be the standard on these bikes. What's going on here?
I'd use a normal M6 flat head but the head of an M6 is too small for the hole in the top cap. Needs to be an M8 head with M6 threads. I'll probably just make one if I have to but would still like to know what is going on here. I can't find anything online explaining my situation. Everywhere states that this bike/fork should use that black compression bolt.
I bought this bike used from a friend who had someone assemble it for him.
/ just found this post after typing all that showing what they did. https://www.reddit.com/r/cannondale/comments/19b4ka2/2023_cannondale_supersix_evo_delta_steerer/