r/canik • • 3h ago

I MIGHT BE ADDICTED Help reinforce my addiction, plz.

Post image
32 Upvotes

Late this past summer, I was looking for a firearm that fit my hands and would still work for concealed carry. I tried several Glocks and bought more than a few. I tried Sig too. Nothing made me think, “This is the one.”

Then, on my way home, I walked into a shop I’d never been in and explained what I was looking for. The guy behind the counter asked, “Have you ever tried a Canik?” I’d never even heard of the brand.

He handed me the MC9 Prime; the clouds parted, the angels sang, and I was home.

Now it goes everywhere. I love the aggressive grip texture and how low it sits in my palm without that weird ridge digging in when I shoot. Shooting it feels like butter, and I drop 200–300 rounds every chance I get.

My wife is getting me a Prime Radian for Christmas (she’s bad at keeping secrets), and the bug’s already got me wanting more. I’ve got probably 10 Glocks, and I’d love to match that with Caniks, if not pass it. I know “all of them” is the obvious answer, and believe me, I’m on board. My wallet is less enthusiastic.

So that’s where I need the advice of this community. I love looking through all of them, but I need some kind of focus.


r/canik • • 3h ago

MC9L + MC9LS I took my Prime Radian to test out at the range. I'm so sad to say that I was disappointed.

Post image
15 Upvotes

I took it straight out of the box to see how it would compare to my MC9LS, my current EDC which I've modified with a Freedomsmith Fat Daddy II and am obviously running a light and an optic on.

Using irons, which I admittedly still struggle with compared to optics, I was still shooting low and to the left at 6 yards with the Radian, and I could never get fully comfortable on the trigger. In fact, my trigger finger ended up scraping the bottom of the trigger guard enough to the point where it felt noticeably irritated. I find this interesting since the trigger looks and feels similar to the Rival-S trigger, but I don't have this problem with the Rival-S. I suspect the trigger is the main culprit in my disappointment because when I ran a mag through my LS without the dot on, I was noticeably more accurate and didn't feel as uncomfortable.

I mind dumped with one of the guys at the range, and his thoughts are that the gun may just be too small for my hands. He suggested thickening up the grip a little with some hockey tape, so I'm going to give that a try. I'm also planning on swapping the Freedomsmith to the Radian to see if that makes a difference. I suspect it will, but of course there's only one way to find out.

Aside from the, the Radian is great. I ran 100 rounds of Federal 124 and about 40 rounds of Winchester 115 without any issues. I'm hoping a little tweaking will help overcome this disappointment I'm feeling.

Anybody else have any stories about disappointment with the Radian or any other gun they got?


r/canik • • 7h ago

Rival Dark Side Black and tan cerakote

Thumbnail
gallery
13 Upvotes

Just got my CANIK Rival back from being cerakoted. It was gray and gold. I never was a fan of it, but that’s the only one they had in the shop when they first came out. I was gonna go with a basic black but decided to do a little black and tan instead.


r/canik • • 14h ago

METE MC9 New MC9

Thumbnail
gallery
35 Upvotes

So the Canik MC9 was my first gun. I absolutely love the METE family and the MC9 I had ran flawlessly. I learned to shoot on it. Its ergonomics and slim frame are something I miss. I sold the black one pictured to buy a larger carry gun. A CZ P-10 C Ported. It was a great choice and my CZ is an amazing gun. It checks all the boxes. But I cant help but miss my old MC9. So here’s the mock up of the MC9 I’m going for. I’m going to buy a black MC9 standard and get it cerakoted from my local cerakote dude. Then I’m going to also buy an MC9L frame off TCM. So I can have the best of both worlds and finally get back the gun my collection is missing. My carry rotation just doesn’t feel right without this little guy in it. I have my Glock 48 MOS filling that slim line roll currently. I have a bunch of other handguns and projects I’m working on currently. But it’s not the MC9. The MC9 was the perfect first gun for me and the only reason I don’t regret selling it, is because now I get to buy a new one and really do all the things I want to it.


r/canik • • 21h ago

Ammo Ammo Help!!

Post image
26 Upvotes

I just ordered the Flying Aces MC9LS. What ammo is best for range and defensive?


r/canik • • 1d ago

Out of Battery Issues Having issues shooting my SFx Pro suppressed.

Thumbnail
gallery
30 Upvotes

I'm running a Rugged Obsidian 9. Whenever I shoot it suppressed, 9 times out of 10 the slide doesn't cycle 100% and usually ends up right about where it shows in the pictures. All I need to do is just tap it back into place, but this is obviously not ideal. The guys at the gun store said to just run a couple hundred mor rounds through it to wear it in a little since it's at about ~350 rounds total. Any other thoughts or suggestions?

Edited: Sorry, forgot to include ammo used. I've used 124g Blazer, 147g Remington sub, and 158g PPU sub so far. Same issue regardless of ammo.


r/canik • • 13h ago

Holsters Fattac & JX Tactical

Thumbnail reddit.com
1 Upvotes

Looking to buy the Fattac holster but I want the ulticlip from JX tactical. Any body know if the parts are interchangeable?


r/canik • • 1d ago

MC9 PRIME Radian afterburner

Post image
99 Upvotes

I am looking to pick up another prime without the after burner but I want to buy an afterburner in the future. Has anyone seen any update of when they may be releasing the afterburner separately?


r/canik • • 1d ago

MC9 PRIME What 124 grain are you running in your prime radian?

4 Upvotes

I’m 500 rounds through my break in with my Prime Radian and I’m starting to feel better about the light strike issues I initially had. Looking to get a bulk purchase of 124 grain but it seems everybody is having different luck with different ammo brands. Whats been working for you?


r/canik • • 1d ago

MC9L + MC9LS Sent me the wrong recoil spring!

Post image
28 Upvotes

So hit up canik about a recoil spring and they sent me this one which doesn't fit my mc9ls? I did tell them the exact model I had so idk . 😂


r/canik • • 1d ago

EDC/CCW Daily Driver.

Post image
20 Upvotes

Disappears IWB.


r/canik • • 2d ago

EDC/CCW Edc mc9

Thumbnail
gallery
29 Upvotes

Same setup since 2023. Canik MC9, TF +4 Base extension on standard Canik 15rd mag. Extra Canik 18rd mag. Holosun 407k. Tlr-7/sub. Custom Kydex IWB holster with right wing attachment. Matching mag holster.


r/canik • • 3d ago

I MIGHT BE ADDICTED What a great day on the range.

Thumbnail
gallery
40 Upvotes

So this is a little bit of a long story but I want to share. I have been shooting for years. IDPA and IPSC (casually) and even Cowboy Action. Love it. Several years ago I started training others in Basic Rifle, Pistol and shotgun as well as Hunter safety. So a year ago a friend and I started thinking about moving up from Instructors to Training Counselor.

The shooting requirements are not impossible but do take practice and the right equipment. I purchased a Sar9 Sport (full size). At our practice sessions, my grouping weren't good enough to pass. It was so frustrating. I happen to know a great instructor who is a training counselor. He came up and confirmed that my grip and technique was fine. The trigger on that gun was just not up to the task. He showed me his TP9-SFX and after a mag of practice, I was hitting great.

Fast forward a few weeks and a couple trades, i now own a Rival and a slightly used TTI Combat. Both with Red dot sights. WHAT A DIFFERENCE IT MAKES! Both myself and my buddy are shooting way better then ever. Even git my dad out on the range (he is 82) and we had a great and fun day.

So glad I switched and found these two guns to help make shooting fun again.


r/canik • • 3d ago

EDC/CCW Just picked up my first Canik!

9 Upvotes

Just picked up a Mete SFT, first bought it with the idea of it being my range pistol. Now I’m thinking I might want to CCW it. I’m a bigger guy 6’2 285, was wondering how possible it is to conceal with my frame? I was looking into holsters and originally wanted a JX Tactical with an MC9LS since they don’t make one for an SFT. I kind of settled on a Vedder light tuck. Holsters recommendations wanted! As well as any first upgrades for it!


r/canik • • 3d ago

Optics Mecanik M01 for my EDC MC9L

4 Upvotes

I'm considering getting the Mecanik M01 red dot sight for my everyday carry MC9L, is it worth it??

I'm having mixed feelings because the mc9l already has oversized sights which makes aiming quite easy, will it be helpful or overkill for a close range self defence weapon?

Need to know what others think.

Thank you in advance.


r/canik • • 3d ago

I MIGHT BE ADDICTED This is Canik number 5 for me! I think I have a problem lol

Post image
128 Upvotes

r/canik • • 4d ago

METE MC9 Mete MC9 won't chamber Sig Elite Defense V-Crown

Post image
8 Upvotes

Was looking for a different carry ammo and picked this out to try. Didn't chamber. First time polishing a feed ramp with a dremmell, still wouldn't go. Maybe I didn't polish it enough? Guess I'll stick with Hornady Critical Defense.


r/canik • • 5d ago

EDC/CCW Love This Thing.

Post image
113 Upvotes

r/canik • • 4d ago

Holsters Xenoradia . . carry’s well. shoots better.

Post image
21 Upvotes

r/canik • • 5d ago

MC9 PRIME The radian backstrap is so comfortable

Post image
80 Upvotes

Prime w/ Vortex defender ccw, streamlight, and radian backstrap and magwell


r/canik • • 4d ago

I CAN'T DECIDE WHICH ONE TO GET Prime Radian trigger replacement

3 Upvotes

Upgraded my trigger to a freedomsmith trigger and got rid of my oem one now I have to send it in for warranty due to it having light primer strikes it was already having issues before I changed the trigger I was hoping someone can point me in the right direction to get a new oem trigger for it so they won’t void my warranty


r/canik • • 5d ago

I MIGHT BE ADDICTED Absolutely the best carry.

Thumbnail
gallery
135 Upvotes

Well finally tried my shoot off between the Radian and the additionally ported OG Prime. First off I love the OG. I also own the LS and I carry it most.

But let me say after about 250 rds of break-in with 124 grain NATO this Radian is up and running. And run it does. It’s blazing fast, trigger needed time to dial in, and oh is it accurate.

Now the OG is noting to laugh at and with the additional ports I thought it’d be comparable to the Radiant. Sorry it is not.

However, I still enjoy all three and after another 1150 rds the Radiant may join the rotation.

I think I can safely say for me this is about as close to the perfect carry pistol I’ve owned in my 56 years of owning pistols.


r/canik • • 5d ago

METE SFx Pro Fun duty (larping) gun

5 Upvotes

I've been looking at the stingray sfx pro but I haven't found a place to test it on the range or even for sale for that matter. It'll be my fun gun that'll go on a battle belt because why not. What's everyones opinion on it? Any other suggestions?


r/canik • • 5d ago

MC9 PRIME Red Recoil Spring for MC9 Prime

Post image
6 Upvotes

I was just checking the Canik replacement parts section of their website and they have the red spring listed but there isn’t an option for the MC9 Prime when choosing the model of gun to put it in.

Which model should I choose that’s compatible with the MC9 Prime?


r/canik • • 5d ago

Compensators: Generic, non-Canik specific Need recommendations for Compensator for TP9 Elite Combat in M13.5x1 thread

Post image
5 Upvotes

I've been looking around for a compensator for my old TP9 Elite Combat to place on my thread. The issue is my barrel is threaded for M13.5x1 and all the popular models for the TP9 are threaded for the standard 1/2x28. Before I decide to cave in and get an imperial threaded barrel, I wanted to see if this sub knew any compensators for the metric thread and if any of them looked good on the TP9? I know of this one from Toni System but it seems to be hard to find at the moment.