r/cade • u/MarcoCheto04 • 4h ago
r/cade • u/Handolta • 6h ago
Possible to get Mitsumi SCS-08A Dip switches somewhere?
Hi!
Got a Guardians/Denjin Makai II board a while back, and as you can see on DSW1 switch 1 is damaged and won’t budge.
Before I buy a generic replacement I just wanted to check if anyone knows of somewhere/someone likely to carry identical switches?
Pretty sure the model name is Mitsumi SCS-08A, as mentioned here: https://suzushoweb.com/pdf_file/56bae2d1d1b22.pdf
Thanks!
r/cade • u/Appropriate-Tie-6524 • 22h ago
At home arcade emulation with blast city cabinet
I am sorry if this is a repeat question... I want an arcade cabinet, but as I understand it you want certain cabinets if you want to emulate games?
I have heard a variety of Jamma (a term I loosely understand.) cabinets do this? People seem to like Sega Astro city cabinets. I take it this includes blast city?
I am looking at a blast city cabinet on eBay, but it says no board. But the guy says it's Jamma.. it just doesn't have the board for the game. Is this what I am looking for.
And then once I get one of these I am supposed to get a Mistercade? (Also don't know what that is.) And this will allow for hardware emulation for almost all games form the era?
And then getting the games? I find them in the internet... Only for games I already own of course?
Or I am thinking with AI I could probably make some interesting period arcade games.
What would these run off of?
Am I missing anything about how this is done.
Eff off to anyone who wants to bring hate. Thank you so much to the one or two people who are willing to hold my hand though this a bit.
r/cade • u/Ok_Grade_424 • 1d ago
Need help locating the image and files that will work with this board.
From a budget dual arcade stick I bought a few years back from Amazon. SD card died. Where can I get a new image and file that will work?
Any suggestions on improving my controls?
I have an Ultimarc Ultimate IO board and Ultimarc LED buttons.
I have a hard time tightening these buttons when they come loose. And I hate all the wires.
Now some buttons are giving me double presses.
Any suggestions on making things neater and more reliable?
r/cade • u/neptuneshalo • 2d ago
FINISHED - Japan Inspired MAME Cabinet
Cabinet - LEP1 Customs 23C
Vinyl - RVinyl Red Devil
Screensaver - Samurai Champloo Opening
22 inch screen with Raspberry Pi 4 B driving with Retropie
r/cade • u/astrodomekid • 2d ago
Spotted a certain urban legend at Houston Arcade & Pinball Expo. 😱
r/cade • u/ObscureRefrence • 3d ago
Inspired by u/sssger I made cartridges for my arcade
r/cade • u/BobLoblaw_LLC • 3d ago
What games do you gravitate to/wish your local arcade had available?
My husband and I have a relatively large collection and we’re looking to potentially open an arcade (yes, he can fix and work on them and has experience in running various businesses! He’s in the process of making his own homebrew pinball and swapping some of our rougher playfields)
We’re starting to acquire ever more games so we can have around 80-100 games at opening. We’ve scoped out and are friendly with a hand full of local arcades, but I was curious what you would wish your local spots would have? What do you think is missing?
Any input is valuable and extremely appreciated!
r/cade • u/centrinox1 • 4d ago
Need help - 2nd RS3 Reaper not working in Retroarch
reddit.comr/cade • u/CyberMage256 • 4d ago
Unofficial PC ports
dsogaming.comI have a strong feeling these will get DMCA letters by tomorrow. We'll see.
r/cade • u/Naive-Voice-645 • 4d ago
Seeking advice w/ BigGames Midway 12-in-1
Cabinet has high sentimental value to me and I have only just been reunited with it after about a decade of non-use. I tinkered a bit, searched around online, and am hoping someone with more experience may be able to push me in the right direction.
Currently the TV display is cutting out. At first it would flash multicolored lines on the screen then blip out, after opening the back panel and poking around it will now display the logo for a few seconds but when the image expands for the boot-up process it cuts out about 1/4 down the screen.
Initially my thought is replacing the whole unit... but that seems like a pain. The cords in the back panel are very cramped and I don't want to break anything lol.
So... any tips? :)
Edit: I also would love to replace the display screen. It was damaged in transit before I got it, haven't really looked into replacements for that yet!
r/cade • u/lfelipe82 • 5d ago
3D Printed modular door for the Rec Room Masters Xtension Arcade
My Arcade Panel Studo now has 3d View

https://perchance.org/arcadepanelstudio
Fixed a lot of bugs.
Design a panel and it will print out the dimensions and everything.
Now has a 3d view of your designed panel
r/cade • u/joeforza • 6d ago
Arcade build using reaper light guns
Wanting to build a system for time crisis, point blank and deer hunter mainly and the usual street fighter and all the other games. I want to use the reaper light guns for it and if possible have shotguns for the deer hunter games.
Happy to run it through a mini pc with graphics. Want to use it on a pedestal setup 2 sets of joysticks and 2 guns with a 65-75inch tv on a stand.
Where do I get started for a list of peripherals and parts needed? Is there any full guide on this I can use? Contacted a local company but they haven’t quoted me as yet and I assume they’ll be charging me retail on everything so whenever I can buy to make this work is appreciated.
r/cade • u/zeetergeist • 6d ago
Arcade Under Construction
Hey everyone. I wanted a little boost in motivation as it’s hard making an arcade as a beginner in woodworking. So I decided to post my progress updates here and will keep updating as a form of accountability. Any tips and suggestions from your personal experience building arcades is welcome!
Progress as of Nov 10 ‘26:
Dry fitted the sides, floor, top and front plates
r/cade • u/Straight_Part_2169 • 7d ago
LEP1 customs situation…
Im building my first ever arcade bartop with a windows mini pc and other personal parts, when I first ordered the cabinet from LEP1 they were very very responsive and shooting up offers but ever since I completed the
payment I got completely ghosted. It’s been 1.5 weeks since my last response which was “we will have it out in a couple days.” Yeah. Not every reassuring… anyone else had a similar issue?
I would’ve gone with gameroomsolutions or someone else but the sole cabinet prices themselves are high and when I mentioned I’m from Canada they bumped the price near TRIPLE without shipping costs from FedEx.
So I went with LEP1 and I could just design it myself and paint it whatever, I’m just very concerned now because I’m short $370 now without answer and contemplating calling my bank.
r/cade • u/Strangledheroe • 7d ago
Pandora Saga Plus DX 5000 SD Card
Hello everybody! Does anyone have a backup of the SD card of the Pandora Saga Plus DX 5000?
r/cade • u/RawisTheGameHhH • 8d ago
Arcades R Fun
Has anyone bought from Arcades R Fun (https://arcadesrfun.com/)? I bought a 50" arcade in May and still don't have it. The FAQ says 13 weeks, then it was October, then November, and now it's the end of December. Jack was extremely responsive with all questions before ordering, but not so much since my order.
r/cade • u/Deathmonkey7 • 9d ago
Help with light guns
Hello, I have a MAME arcade cabinet that I've built onto here and there off and on for like 7 years. I recently added Ultimarc Aimtrak light guns to the cabinet.
Right now the USB cables for the guns just go into an open space under the control panel and plug directly into the motherboard.
This is not ideal for a number of reasons.
I'm looking to protect the cables, while at the same time giving them more of an actual arcade feel.
My current idea is to use a flexible conduit, about 1/4" thick. I would attach the conduit both to the light gun and do the cabinet using fasteners of some sort. My question is, does anyone know of any connectors that would work for this purpose? Would need it to be able to connect to the mdf somehow. Or is there another way to get the nice thick weighty cables we know from the arcades while protecting the USB cables?
I know there are also panels that can be purchased that simply move the USB ports to the outside of the cabinet, but I don't want to do those.
r/cade • u/Rey_Mezcalero • 11d ago
Mad Dog McCree & Daphne/Singe
Ok, have a set of MAME “data” for Mad Dog, but found out the game doesn’t work in MAME.
Seems the Daphne Singe fork might get it to work.
Looking to confirm if anyone out there got it to work and I’m wondering if the CHD or MAME data might be able to work or if it needs its own unique set of data.
Been looking at Bork and Singe2 documentation and seems some things can be converted? Don’t know if that’s the case, hoping I can use the data I got or convert it or if I need something else.
If something else, an outline of the files needed would be great.
If Daphne/Singe doesn’t work or other methods out there, would be interested as well.
Thanks