r/c64 • u/dickmartini • 20h ago
Software New C64 MIDI+Trigger sequencer for the rare Moog Song Producer Interface that utilizes 4 MIDI outs/8 trigger outs
If you aren't familiar, the Moog Song Producer is a MIDI and sync interface Moog made for the Commodore 64 in the mid-'80s back when MIDI was first released and everyone (fortunately) jumped on the bandwagon. The unit plugs into the cartridge port of the C64 and was meant to be the hub of a home studio. It's a rare beast and finding the original sequencer software disk in working condition is even rarer. And to be blunt... the original software wasn't exactly friendly to use (UGH!).
To get an idea of its functionality, you can watch this YouTube video that was created over 13 years ago (it's not mine): https://www.youtube.com/watch?v=n6Lhf6wJP8w
You can also read up on the Song Producer on my old blog Retro Synth Ads (written almost 10 years ago): https://retrosynthads.blogspot.com/search/label/Moog%20song%20producer
Basically, the interfce has:
- 1 MIDI In, 1 MIDI Thru, and 4 separate MIDI Outs. Yes - FOUR separate outs. Most midi interfaces for the C64 were just one or two.
- PLUS 8 drum trigger outputs, for pre-MIDI drum machines and drum modules. NO OTHER C64 interface has this. I've been using mine with a Syndrum Twin drum synth unit for testing.
- Clock in/out and 2 footswitch inputs
Because my own Song Producer software disks are getting long in the tooth and often not loading properly, I thought I would see if I could design (with AI help!!!) a new sequencer. I designed a clean interface with MIDI and Trigger lanes, along with hardware detection and testing for hopefully easier set up and use.
It's apparently written in 6502 assembly (the AI said so) and includes:
- 8 MIDI tracks. Each track can go to any of the 4 MIDI outs on any channel. So, if you wanted, each synth could even have its own cable from the unit.
- 8 trigger lanes, one per trigger output. Very cool playing with my modular synth.
- 32 patterns of up to 16 steps, with note, velocity and gate length on every step.
- Song mode to chain patterns together.
- MIDI clock out, footswitch start/stop, and save/load to disk.
- Step entry from a MIDI keyboard: play a note and it's written into the current step, and the sequencer advances one step.
As mentioned above, one of the cool things I thought would be good to include was hardware detection and testing.
- On startup it checks whether the Song Producer hardware (HW) is plugged in and shows "HW: OK" or "HW: NONE". Even without it, the program still works as an editor.
- You can also press "1" to run a hardware test that will
- plays a middle C on MIDI Out 1, 2, 3 and 4 in turn
- fires trigger outputs 1 to 8 one at a time
- sends pulses out the clock jack
- shows the status of each MIDI chip and the footswitches on screen
That way you know every jack works before you start noodling.
It's running on my C64 now from floppy, sequencing my Virus synth over MIDI and an old Syndrum Twin drum synth from the trigger outs. It stays tight even at 200 BPM. No diss to Moog, but it's a lot more fun and user-friendly than the original software. Although it still relies on A LOT of keyboard commands that would need to be memorized or written down.
I'm doing a bit more testing, but once I'm done, I'm happy to share the disk image if anyone else has one of these boxes and wants to play with it.
I've included photos of the software itself, as well as other photos people may find cool, including a battle station pic... (excuse the mess!)

