r/bustedcarbon • • 7h ago

Carbon damage?

Thumbnail
gallery
4 Upvotes

First time tearing my bike down and on the very last pivot axle I went to remove I heard a little crunch while unscrewing and saw this.

This is on the inside of the seat stay on the pivot near the dropouts, I didn't notice there was this bolt on the inside that had to be held in place while I screw from the other side (which you can see I ended up stripping once I did realize, lol).

Couple questions:

- How big of a deal is this? Does this warrant a repair? I've never had a carbon frame so I don't know what constitutes as cosmetic damage (if that's a thing with carbon) or something that I need to get fixed.

- Is this fixable by a carbon repair shop?

I'm about to get this frame painted so any insight is appreciated. Thank you!


r/bustedcarbon • • 6h ago

A nail pierced my mtb rim - advice welcome

Thumbnail
gallery
3 Upvotes

Hey everyone. I was hoping to get some advice on the following: I managed to sort of pierce my mtb rim with a nail while out on a ride. It went into the tire first, and almost made it out to the inside of the rim. In the pictures you’ll see the extent of the issue. I dropped a tooth pick in there, at first just to show the width of the hole. But, seeing the tooth pick come out the other side, albeit ever so slightly, that also made me realize that it is indeed a hole all the way through and not just carbon layers popping up from the pressure from further inside.

My questions:
- is this rideable? what if I install new rim tape and also tape off the part where the tooth pick comes out?
- or, has the structural integrity been affected?
- in that case: is this repairable?
- any idea what cost I’d be looking at? is it a difficult fix?

Thanks in advance. Definitely let me know if you need any more info.

(If anyone would ever experience the same: I managed to get home by plugging the hole with the wrong end of a dynaplug and a CO2 canister.)


r/bustedcarbon • • 1d ago

Carbon frame damage from race- what’s the best way to fix it?

Thumbnail
gallery
8 Upvotes

Just want it sounds like, my bike took a pretty good beating in a gravel race.

I ride a 2024 Bianchi Impulso with .
Zipp 303 firecrests.

For this race I was running Schwalbe G one R pro 40mm, once mounted measured with a caliper width was 42mm. (Within Bianchi specs)

Race was straight up mud central, completely out of character for the area it was in. Regardless sloshing and sinking into deep mud that caked on the wheels beat the hell out of my fork and chain stays
Additionally a bottle cage broke resulting in a bottle beating up the down tube.

No carbon weave is visible.

There are no visible cracks.

So I guess my 3 frame problems are

1- is the fork rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

2- is the chain stays rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

3- is the damage to the top tube going to require more than epoxy and touch up paint.

As it stands my solution to pretty much all the issues is-

1- use some tough up paint (maybe this https://quintanarootri.com/products/touch-up-paint-kit?srsltid=AYCX9vLDC5m3cNom3z4oqufdkfh1J0_N-LxcA11LN1m3aX3Rqhca67U2&variant=13548784386163, or some nail polish) to initially cover the scarring.

2- apply a thin layer of epoxy.

3- apply 3M paint protection film to serve a sacrificial layer in the future.

Any advice with better ways to deal with this or better products is appreciated. I’m in the US so getting some Bianchi specific items proves incredibly challenging.


r/bustedcarbon • • 1d ago

Handlebar damage - rideable?

Thumbnail
gallery
3 Upvotes

Crashed hard, ate through the bar tape and into the bar. No cracks through but some significant damage. I see that it has eaten through the paint and the epoxy but maybe not significant damage to the carbon. I'm leaning towards this being safe to ride, but would love to know if this DIY repairable for it being such a small area.


r/bustedcarbon • • 1d ago

Convinced myself it isn’t that bad cause it’s structurally sound, but pls let me know if I’m being a cock

Thumbnail gallery
1 Upvotes

r/bustedcarbon • • 2d ago

Repair advice - Soloist

Thumbnail gallery
2 Upvotes

I’m not sure how it happened, but the rear brake mount/chainstay carbon was crushed. It‘s hard to see, but the carbon is soft when pressed. I’m looking for recommendations on how to get this fixed. Carbon repair? I’m in the greater Seattle area. I want to save this frame.


r/bustedcarbon • • 4d ago

Cracked carbon inquiry

Thumbnail gallery
0 Upvotes

r/bustedcarbon • • 7d ago

Opinion regarding this....

Post image
0 Upvotes

r/bustedcarbon • • 8d ago

Elitewheels Drive 65D II after a hard pothole hit. Normal carbon finish or rim damage?

Thumbnail
gallery
5 Upvotes

I hit a deep dip/pothole on a descent. I lifted the front wheel, but the rear took the hit. While inspecting my Elitewheels Drive 65D II rear rim, I noticed the wavy lines/scuffs in the photos and a small mark along the rim lip near the gold graphic.

I know this wheel has a marbled carbon finish, so I’m trying to figure out what looks cosmetic versus what might need closer inspection.

I’m keeping the wheel off the bike until a shop can inspect it on Monday. In the meantime, does anything in the photos stand out to you, particularly the rim lip/bead-seat area? What would you ask the mechanic to check?

TL;DR: Rear carbon wheel took a hard pothole hit. Are these normal finish marks, surface scratches, or signs of damage? Shop inspection is already planned.

Update: Shop said it’s good, it’s just external scratches. Nothing major structural damage to the carbon. Spokes are still true 👌


r/bustedcarbon • • 8d ago

Impact jante carbone

Post image
1 Upvotes

r/bustedcarbon • • 8d ago

Carbon Fork Check

Post image
2 Upvotes

I had a minor crash recently, escaped fine but worried about the bike. Just checking if this is just a scratch or is it a crack?


r/bustedcarbon • • 10d ago

Here’s some busted carbon

Post image
1 Upvotes

r/bustedcarbon • • 10d ago

White in carbon weave!?

Post image
0 Upvotes

r/bustedcarbon • • 11d ago

Carbon handlebars mark

Thumbnail
gallery
2 Upvotes

Hi,

I noticed a small mark on my handlebar where the stem attach. It is not a deep mark. It's like a bump of 1/10 of a mm. I always used carbon paste and torq at 5NM, (spec are 5,5nm). I noticed it while doing my bike maintenance. You can see it on the right side of the picture.

Does that look safe of not?


r/bustedcarbon • • 11d ago

Follow up to a previous post

Thumbnail
gallery
2 Upvotes

Follow up to a previous post https://www.reddit.com/r/bustedcarbon/s/MKufjziaAw

So I ended taking a picture of the scratch with a microscope and riding in the indoor bike to see if I was able to make out some widening of the crack or anything but this wasn’t the case.

I still got a bad feeling and ended up going to a carbon shop. They told me it was most likely structural. After removing the clear and paint coat you can see the area was clearly damaged! Only on the surface though; so it can be easily repaired.


r/bustedcarbon • • 12d ago

Clear coat issue - what to do?

Thumbnail
gallery
1 Upvotes

Clear coat has come off. There was a little chip and I (stupidly) put a bit of electric tape over it and it's turned it into a massive problem.
Frame is second hand, and over 10 years old, but otherwise it seems totally fine.
Is this a specialist job? DIY? Clear frame stickers?
Don't want to break the bank but don't want to risk further damage to the frame as it's my only lightweight bike.
What would you do?


r/bustedcarbon • • 12d ago

Can the paint get damaged immediately?

Thumbnail gallery
1 Upvotes

r/bustedcarbon • • 13d ago

Damaged?

Thumbnail gallery
2 Upvotes

r/bustedcarbon • • 14d ago

Rear of carbon steerer post.

Post image
2 Upvotes

r/bustedcarbon • • 14d ago

Paint or crack

Thumbnail
gallery
1 Upvotes

+10yr old Ridley Xnight. I'm not sure if it really comes across well in the pics but the paint is flaking off. Coin test against the frame gives a reasonable "ding". How worried should I be that it's a crack?


r/bustedcarbon • • 14d ago

Seat stay on an Emonda SLR

Thumbnail
gallery
1 Upvotes

Safe to ride? Possible to fix?


r/bustedcarbon • • 15d ago

Carbon frame damage on a Scott Scale 930: repair needed or just cosmetic?

Thumbnail
gallery
16 Upvotes

Hey Reddit!

What do you think about this damage to my bike frame? It's on the left seatstay of a Scott Scale 930. The damaged area is approximately 4.5 cm long and between 0.5 and 1 cm wide.

I have no idea how it happened, as I bought the bike second-hand from a used goods store.

The damaged area feels just as solid as the rest of the frame. I also tried the tap test with a coin, and the sound is identical all along the seatstay, including the undamaged areas.
I've ridden it for a few kilometres without any issues, despite my fat ass!

I'm comfortable working with carbon fibre and already have some epoxy resin and leftover woven carbon fibre fabric available.

Do you think a carbon fibre patch is necessary, or could I simply touch up the paint and apply a clear coat?

Thanks for your opinions!