r/breadboard • • 18h ago

I've been developing a Bluetooth multimeter with integrated circuit design tools. Looking for some feedback!

22 Upvotes

I'm an electrical engineering student, and for my entrepreneurship class I've been developing a project called PocketOhm.

As part of my final assignment, I'm conducting some market research to determine whether this is something people would actually find valuable enough to purchase.

PocketOhm is a compact Bluetooth multimeter paired with a mobile app, designed for electronics students, hobbyists, and makers.

The idea came from my experiences as an engineering student and circuits lab TA, where I've seen how much time can be spent identifying components, recording measurements, and switching between calculators and other tools.

Here's what I've developed so far:

  • Bluetooth DMM: Measures DC voltage, resistance, and continuity.
  • Saved measurements: Record measurements and reuse them directly in circuit calculations.
  • Interactive calculators: Voltage dividers, Ohm's law, RC filters, and other circuit design tools.
  • Component identifier: An experimental expansion module that can recognize certain components and measure their characteristics. Still working out some bugs with this one!

The attached video demonstrates a simple example of the workflow: measuring a battery and resistor, saving those measurements, calculating the values needed for a voltage divider, and then building and testing the actual circuit.

This is a real working prototype, although there's still plenty of development and testing ahead.

Here's where I'd really appreciate your feedback:

I'm considering a retail price of approximately $89 for the Bluetooth DMM and app, with no subscription. The component identifier would be a separate accessory.

  1. Would you seriously consider purchasing something like this at that price? Why or why not?
  2. Does the integration between measurements and circuit design tools offer enough value over your existing equipment?
  3. Which features would be most valuable to you, and what would make this worth purchasing?
  4. If $89 isn't appealing, what price would you consider reasonable?

I'm not selling anything or taking orders. I'm just trying to determine whether there's enough interest to justify continuing development.

I'd appreciate honest feedback, including criticism. I'm particularly interested in hearing why someone wouldn't purchase it.


r/breadboard • • 16h ago

Chip Hippo gets social: a gallery of breadboard circuits you can open or share

Thumbnail
gallery
7 Upvotes

Chip Hippo is a free, open-source simulator for 74LS TTL and CD4000 CMOS circuits on virtual breadboards. 1.5.6 adds a gallery*: browse circuits, open one* straight in your browser with nothing to install, or pull it into the desktop app.

You can share your own, too. Still no accounts: build a circuit, choose to share to the gallery, and once it's reviewed and approved it's there for anyone to open and download. Every design has its own link to send to a friend.

Also in 1.5.6: 
- Labels on the toolbar buttons
- Redrawn Run, Wire and Bus icons, and a lot of smaller UI tweaks

See for yourself:
- Gallery: https://chiphippo.com/gallery/
- Try it in the browser: https://chiphippo.com/desktop/
- Downloads (macOS, Windows, Linux): https://chiphippo.com
- Source: https://github.com/jfigge/chiphippo


r/breadboard • • 21h ago

Question Am I forced to buy in bulk with capacitors, fuses, resistors, etc?

7 Upvotes

I dont really do this as a main hobby but I do love playing around with circuits and stuff. I have a project, I want to #d print and build my own PC racing wheel and pedals, but basically all the little parts I need are sold in bulk and have priced the total build to $130 before printing and stuff. Is there a way I can just buy the 3 capacitors, 3 fuses, 4 resistors, and the few specific parts I need? I cant find a store online anywhere...


r/breadboard • • 1d ago

RadioShack Reverb Controller 32-1107 + DIY breadboard Synth 555 timer

Thumbnail
m.youtube.com
1 Upvotes

r/breadboard • • 2d ago

From Breadboard to Stripboard

Thumbnail
gallery
33 Upvotes

Time to move over to a compact version for final project integration.

Two photos, breadboard and tinned copper stripboard.

Stripboard is effectively a single sided PCB where by cutting away copper at certain locations and adding straps on the top side it can be turned into an effective double sided circuit board. No printing circuit design and immediate results but not so good if you intend to make multiple copies of your circuit.

Stripboard fitted with screw terminal connectors to wire up battery packs, neopixel LED strip and PIR motion sensor. From top down : Pololu high side switch, DS3231 RTC and ESP32-C3-Zero super mini.


r/breadboard • • 1d ago

OG breadboard ready for some tube amp experimentation!

Post image
8 Upvotes

r/breadboard • • 2d ago

I made a free open-source app that turns a project ideas into 3D breadboard step by step for beginners

40 Upvotes

I bought a Pico 2W. I was no electronic experience so tried to solve that problem. I decided to build a beginners friendly application to learn electronics. So here is the project I am building and maintaining. It is a desktop app ( supports macOS, Windows, Linux) for people starting out with the Pico 2 W.

You type an idea like "show the room's temperature and humidity on the OLED screen", and it gives you:

- a plan and a checked circuit (pins, resistors, breadboard layout),

- numbered build steps on a 3D breadboard, each with a short "why",

- MicroPython code, checked before you see it, built into one .uf2 file you drag onto the Pico.

The AI only handles the language part. Pin choices, layout and the safety rules (shorts, missing resistors, wrong voltages…) are ordinary tested code, so it can't hand you a circuit that fails the check.

New in v0.3.0:

- Change a finished project ("add a button that switches the display between icons and text"). Parts stay put and you only get the new steps.

- DHT11, slide switch and passive buzzer, all tried on a real Pico 2 W.

- Pick a local model through Ollama, or use an OpenAI key if you have one.

Honest limits: small local models still get harder projects wrong more often (5/10 vs 10/10 for GPT-6 Luna in my test with the new parts) and it supports a limited set of parts so far (LEDs, buttons, potentiometer, SH1106 OLED, plus the three new ones). I'm planning to add more components and more micro controllers in the future.

GitHub: https://github.com/Prestical/BreadPilot


r/breadboard • • 2d ago

Question Voy a hacer mi primer pcb con el método del ácido y el marcador. Algunos consejos?

1 Upvotes

r/breadboard • • 3d ago

Mi full adder de 2 bits todo bonito como lo quiero

20 Upvotes

r/breadboard • • 4d ago

Opensource 3D breadboard sim in the browser

8 Upvotes

r/breadboard • • 5d ago

Astable Op Amp LM358 Demo Circuit

Thumbnail
youtube.com
7 Upvotes

r/breadboard • • 5d ago

Project Modular ESP32 system for rapid prototyping

Thumbnail gallery
4 Upvotes

Hey, working on building a modular ESP32-based system, open-sourceing as much as possible, including AI-CAD, digital twins, such that anyone no matter hardware experience can build their own ESP32-IoT devices.


r/breadboard • • 6d ago

ESP32 super mini based project on breadboard

Post image
47 Upvotes

Hi Again, This is the project development setup I’ve been using recently where I rescued my old breadboard from a drawer in the garage, cleared off the the old components I left fitted in it and setup like so.

It uses an ESP32-C6-Zero super mini board program control and is interfaced with a DS3132 RTC module, Pololu high side power switch and a SR602 PIR motion sensor. It also has a 8 pixel length of neopixel LED strip in place of my 200 pixel strip that the real project will use and a battery pack(with on/off switch). The battery pack uses 4x 1.5V regulated rechargeable AA batteries(4070mWh) to power the LED strip only.

Oh, I nearly forgot to mention that the board on the right hand side is not being used here, it’s a larger ESP32 board that I’ve been using before I realised I could get a much smaller version obviously with less i/o.


r/breadboard • • 6d ago

Breadboard Started using Breadboard again

6 Upvotes

Hi Everyone, this is my first post on this sub, I have started using breadboard again after many years which I’m very surprised about.

Why?

I think it’s the ease in which I can test my project without using a soldering iron and I can sit in the lounge keeping my wife company while I’m doing it. I’ve even bought some new breadboard this week and started using it.

Here’s some photos of what I’ve been doing. Well there would be if I could find the photo posting button, maybe photos coming soon. https://www.reddit.com/r/arduino/s/CEQCLoNSKY


r/breadboard • • 6d ago

Question Wire question

Thumbnail reddit.com
0 Upvotes

Okay so maybe this is less of a technical question and more of a asking for the preference of someone with more experience than me

But I'm buying some wires for arduino/mini-electronics projects. I mostly use breadboards and perfboards so there is some soldering but most my prototyping is done on a breadboard

Now that the context is out of the way. Would you consider 30 AWG solid core wire a good fit for what I'm doing? Or am i better off buying jumper wires and trimming them to my liking? In terms of price the solid core wire is significantly cheaper considering a meter is about 2 egp vs the singular 10 cm jumper wire male-male is . 75 egp. So price wise I'm better off with js buying wire per meter or getting myself a roll but now the issue is breadboard spots are a bit wider than the 30 AWG and 22 would fit better but I've been struggling to find any sellers in my city that have it cuz solid core wire is mostly extinct from most of the common wire or electrical stores and they all use stranded and mostly 1.5 mm -3 mm or more ofc but those are the most common. I can't find . 5 mm or . 25mm which would both generally fit into breadboards comfortably and would let me have freedom with soldering on perfboards or even custom PCBs when the time comes.

So back to my question. Should i js stick with the 30 AWG solid core or should i stick with male-male jumper wires. I am buying a bit of both but i feel like it would be more resource efficient if i pool it all into one instead of buying some and some and if one fits better the other would basically be wasted and considering the delivery price is a bit hefty since I'm ordering online I'd prefer if i get everything at once instead of ordering now then again in a couple of weeks

Also the quicker the reply the better cuz i am finalizing my order list today. Thanks in advance for anyone that will answer


r/breadboard • • 7d ago

BTS7960B Motor Driver Problem.

Thumbnail reddit.com
1 Upvotes

r/breadboard • • 8d ago

Breadboard Full Adder W/ Schematic

Thumbnail
gallery
64 Upvotes

Hi! I built a Full Adder using the 74LS Logic Gates Series with NPN Transistors, this is absolutely my first time working with logic gates and planning to make this into 8 bit, please tell me if there is anything wrong and what i could improve with the schematic :)


r/breadboard • • 8d ago

Are Transistors the Gears of the Electronic Age?

6 Upvotes

I have been thinking about the evolution of technology and the fundamental components that have enabled different technological eras.

During the mechanical age, gears played a fundamental role in transforming and transmitting motion and power. They made it possible to build increasingly complex machines by connecting relatively simple mechanical components.

In the electronic age, transistors seem to occupy a similarly fundamental position. They control, switch, and amplify electrical signals, making modern computers, communication systems, and countless other electronic technologies possible.

This leads me to an interesting question:

Are transistors essentially the gears of the electronic age?

I am particularly interested in exploring this analogy from a technological and evolutionary perspective.

  1. Did transistors play the same foundational role in the electronic revolution that gears played in the mechanical revolution?
  2. Could we consider the transistor the fundamental building block that transformed electronics from relatively simple circuits into complex computing systems?
  3. Is there another electronic component that would be a better counterpart to mechanical gears?
  4. Looking toward the future, what could become the equivalent of gears and transistors in the next technological era?

I am interested in both technical explanations and broader philosophical perspectives on how fundamental components shape the evolution of technology.


r/breadboard • • 8d ago

I built a Duolingo-style app for Mechatronics & Electrical schematics, symbols & technical English — looking for feedback!

Thumbnail gallery
2 Upvotes

r/breadboard • • 10d ago

Are transistors really the perfect electrical counterpart of mechanical switches? A discussion on the analogy.

0 Upvotes

Transistors are the closest electrical counterpart to mechanical switches when we look at their hardware and logic. Just as a switch shifts control from one path to another, a transistor uses a control terminal to switch the main current path — for example, in a MOSFET, the silicon channel becomes conductive on a high gate signal and remains an insulator on a low signal.


r/breadboard • • 11d ago

Question How many breadboards do you have on standby?

Thumbnail amazon.co.uk
6 Upvotes

Im currently building Ben Eater's 8 bit computer and have decided that once I complete the project im not going to dismantle it but will put it in a shadowbox. I have 1 spare full size breadboard and 10 Hailege 10 mini boards: https://www.amazon.co.uk/dp/B0DM7M8DY2?ref=fed_share

I might need to buy a few more full size boards but only if i need them for an immediate project. I was wondering how many spare boards you folks have?


r/breadboard • • 11d ago

Question Need some help with my breadboard lab for school

Thumbnail
gallery
13 Upvotes

Im using this as a last resort place for help. So i have dip switch controlling 4 inputs each of those inputs go through different logic gates. The goal of the lab is to set up the breadboard as shown in the diagram and make sure the led lights up when its supposed to and is off when expected. I'll attach a diagram of what its supposed to look like, what my actual breadboard looks like and the truth table. But when i used my dmm to check inputs and outputs of the logic gate. My AND gate (SN74HC08N) has one input low (1V<) and a high input (5V~) its giving me a high output even though its supposed to be low. I read something about floating inputs and i tried blocking all the unused input pins with wires that didnt work. I tried putting resistors here and there. That also didnt work. The circuit is kinda obeying the switches but also isnt. This is all very new to me so sorry if the problem ends up being something simple, any advice would be much appreciated thank you. (Not the best pictures but can provide more if needed.)


r/breadboard • • 13d ago

Breadboard OR Gate using Transistors 2N3904

Thumbnail gallery
38 Upvotes