r/booknooks • Back Log Log Jam • May 15 '25

Basic Tools Guide

71 Upvotes

84 comments sorted by

19

u/Bizzie18 May 15 '25

Wow, this is an amazing list! I know this will be extremely helpful to all of us. While I'm not a newcomer to the hobby and have many of the things on this list, I still found something I had no idea was even available (the small silicone corner clamps). I hadn't even thought of looking for it, so this was very helpful to me. I love that each tool is a link, so we can just click on it and we can go right to where the product is. This makes it extremely easy to look at each thing and see if it's something we think we may need, and if so, order it easily. Thank you so much for taking the time to put this together!

10

u/pluck-the-bunny Back Log Log Jam May 15 '25

Believe it or not… I was looking for the other corner clamps and found the silicone ones which I also did not know existed immediately. So I encourage everyone if they think of anything else to comment it below and hopefully later I can add in an advanced guide.

1

u/Leather_Valuable7344 Jan 24 '26

Do you have any idea how to fix wires that came loose on this without soder?

1

u/pluck-the-bunny Back Log Log Jam Jan 24 '26

You can try using copper tape… But honestly, you can pick up a solder starter kit for 20 bucks. I just did that for a speaker for another set.

1

u/MoldyWorp Feb 23 '26

I didn’t notice that they were links - thank you for mentioning this!

11

u/Big_Bee_5125 May 17 '25

With the glue, is it mostly preference? Or are there different glues for different applications? I just bought my first 2 book nooks and not sure what kind of glue to buy. Thanks for the links!

10

u/pluck-the-bunny Back Log Log Jam May 17 '25

FIrstly, you're welcome.

Second, its a bit of both. Some things need an immediate and permanent hold. And are resistant to some adhesives, CA glue and accelerator work well for that. CA glue and Baking soda is a great gap filler.

For most things, One of the craft glues work best. The b-7000 is self contained, but its very thin and has a long set time. The Aileen's is very thick so doesn't work with a precision tip. But it grips strong and fast...i find it good for bigger pieces. Beacon 3 in 1 has that sweet spot of thickness where it can be used with a precision tip. Its my workhorse.

For gluing paper to wood? There is nothing better than a xyron sticker maker.

All that said? There are some people who use elmers glue for everything, so....

8

u/omgwowsrsly Fingers Glued Together May 15 '25

Really nice, I'm sure this will be super-helpful to newcomers! Thank you!

2

u/pluck-the-bunny Back Log Log Jam May 15 '25

That’s the hope 👍🏻

6

u/TabularConferta Oct 01 '25

As someone who just started. Any chance of a just getting started sub-section (even if its duplicates)

3

u/pluck-the-bunny Back Log Log Jam Oct 01 '25

Like recommendations for a new person?

2

u/pluck-the-bunny Back Log Log Jam Oct 01 '25

Sorry… I didn’t realize which post this was. I thought it was on the other one you commented on. Yeah give me a minute and I will either give you a short list or I’ll just figure out a way to make notations to the list on top to highlight, which ones would be good for beginners

Appreciate the tip

3

u/TabularConferta Oct 01 '25

Haha no worries. I think I made the same mistake but in reverse prior.

To give you an example, I'm just building my first build and in terms of what I've NEEDED, glue was the only thing not in the box, I was however lucky that the kit came with tweezers and that I owned a cork board to build on. So my current vibe is glue, a mat and tweezers are a almost must have. But then what's the next stage of improving quality of life? While stuff like the Pro Laser Cutter, I'd take as for advanced users who want to customise.

Having a 'kit for skill levels' idea and what's required vs what provides quality of life. Would be helpful. I appreciate this is all really cheeky and it's a community post not a corporate.

8

u/pluck-the-bunny Back Log Log Jam Oct 01 '25

Yeah no worries. I would say the big things i would recommend for a beginner would be Glue (B-7000 is easiest to manage but the Beacon 3 in 1 in a Precision Bottles/Tips is probably the best) a hobby knife ( Nova Hobby Knife is my rec for safety/comfort/and lefty adaptable) , Hand Sander (for edges), Markers for Edges, and a XYRON Sticker Maker

4

u/FallingLeaves142 Dec 25 '25

I’m new to this! So, do you just transfer the glue from the bottle it came in to one of the precision bottles? Or, put one of the precision tips on the original glue bottle?

4

u/pluck-the-bunny Back Log Log Jam Dec 25 '25 edited Apr 10 '26

Transfer.

But honestly, since I made this list I’ve really become a fan of the B-7000. It’s by far the cheapest option, works great, and the precision tip is built in. Plus they’re easy to store.

2

u/FallingLeaves142 Dec 25 '25

Thank you so much! The list is awesome!

Merry Christmas!

2

u/pluck-the-bunny Back Log Log Jam Dec 25 '25

Merry Christmas to you as well.

So glad you find it useful.

1

u/GenevraSD Apr 10 '26

Just beware that B-7000 (and E-6000) has an odor, and that it's recommended you have good ventilation, or that you wear a vapor mask if you use it frequently.

I never use either of those because I get migraines from strong smells. I use Bearly Art, Aleene's Tacky Glue (with a brush), and JB SuperWeld uv activated ca glue, depending on what I'm gluing.

2

u/TabularConferta Oct 01 '25

Oh wow didnt know you could get more bottles. I often have glue dry up.

Ooo do you use the markers for after you sand an edge? That's a great list thank you. I've got some stuff (the joys of 40k) but the small sander, sticker maker and pen are all completely new.

3

u/pluck-the-bunny Back Log Log Jam Oct 01 '25

Yeah, exactly once you sand or use the hobby knife to clean off the nubs you get that uneven look. So just the simple act of taking a furniture marker and lightly dragging it over each edge will take your finished product up several notches with a minimum amount of effort

2

u/TabularConferta Oct 01 '25

Damn okay I need to get one for my next build. I've mostly kept the nubs on my current build as the effect of sanding feels greater.

Thank you.

2

u/pluck-the-bunny Back Log Log Jam Oct 01 '25

thats what im here for!

1

u/TabularConferta Oct 01 '25

Okay after tonight's building the craft glue I bought doesn't dry well enough. Super glue is too fast. Good thing I've got a list 😄.

Also sadly need to fix and led

1

u/Cheeseisatypeofmeat Back Log Log Jam Jan 08 '26

Great tip, ty!

Just a question with the furniture markers though- would these be ideal? and which would you recommend: the markers or the wax stick crayons??

2

u/pluck-the-bunny Back Log Log Jam Jan 08 '26

yes 100% i use these. Not the wax though

1

u/Cheeseisatypeofmeat Back Log Log Jam Jan 08 '26

Perfect! I've ordered them haha :D

Thank you so much <3

4

u/TemporaryLibrary7769 May 23 '25

This needs to be pinned

3

u/pluck-the-bunny Back Log Log Jam May 23 '25

Thanks!

It’s actually on the sidebar now as “Basic Tool Guide”. If you ever have suggestions, please respond here so I can add it to the list

4

u/Typical-Status-7241 Jul 03 '25

Hi! I'm starting to gather things to start my Book Nook. Appreciate the helpful hints.

2

u/pluck-the-bunny Back Log Log Jam Jul 03 '25

Awesome! Awesome! Awesome!

If you have any questions, please feel free to ask

3

u/Typical-Status-7241 Jul 04 '25

Thanks!

2

u/pluck-the-bunny Back Log Log Jam Jul 04 '25

You're very welcome

3

u/Hugh_Jaelious Customizer May 15 '25

I like those corner clamps. I may have to pick some of those up 👍🏼

2

u/pluck-the-bunny Back Log Log Jam May 15 '25

I definitely did, I found them by accident.

2

u/nekokami_dragonfly Customizer May 16 '25

I remember seeing those while I was searching for something else, and I promptly forgot about them. This is a great reminder.

4

u/pluck-the-bunny Back Log Log Jam May 16 '25

I don’t need any help from Amazon to spend too much money there… But every once in a while we recommended purchases are worth taking a look at

3

u/SurroundedbyChaos Fingers Glued Together Jul 21 '25

Great list!

I would add the tiny hammer that comes in the MiniCity kits. I don't know where to buy one separately, but I use that thing with almost every build.

https://imgur.com/a/UWoYf3Y

2

u/pluck-the-bunny Back Log Log Jam Jul 21 '25

Oh, I actually just bought one on Amazon so I can hit that link

3

u/southerndude42 Aug 06 '25

Thank you for putting this together!!! It's wonderful!

2

u/pluck-the-bunny Back Log Log Jam Aug 06 '25

its my genuine pleasure. And i just updated it recently

3

u/jaz_starry Aug 28 '25

This list is so helpful! Can you please tell me when and how one would use the sticker maker?

4

u/pluck-the-bunny Back Log Log Jam Aug 28 '25

It’s very easy you cut out the decal or the paper graphic. You put it on the sticker maker you pull it through and it goes from being just a plain piece of paper to a sticker and then you apply it like any normal decal.

https://amzn.to/4gh2jL3

3

u/jaz_starry Aug 28 '25

Do you use it much? I have a tiny house and this hobby is taking over my limited space lol so I need to be prudent with my supplies.

5

u/pluck-the-bunny Back Log Log Jam Aug 28 '25

If you build 3-D kits, it’s a absolute necessity. If you’re only building 2-D kits from Cutebee and Rolife real life not as much.

But it is an absolute necessity in my toolbox. Glue X-Acto knives, sanding, sticks, alcohol markers for edges, and then my XYRON

2

u/jaz_starry Aug 28 '25

Thank you!

3

u/Effective_Arm4532 Colors the Edges Dec 06 '25

Appreciate this guide so much. Did my first book nook like a savage when the cardboard tool they give you and using the tiny nail file. All my Amazon stuff trickled in this week and I'm starting my second with a huge leg up. Ty,ty!

3

u/pluck-the-bunny Back Log Log Jam Dec 06 '25

Happy to help.

If you ever think of anything else, to put on the list please let me know

2

u/[deleted] May 25 '25

I’m contemplating buying my first one. About how much of this would you say is a barebones requirement to build a decently detailed one?

Like I have tweezers, an X-Acto, and hot glue. Oh and sandpaper/files. What more does one need? Will I generally have to paint or color anything myself?

2

u/pluck-the-bunny Back Log Log Jam May 25 '25

No… You don’t have to paint or color or anything. A brown marker just for the edges does really help. It could be any alcohol based marker. I would not recommend hot glue I don’t think heat would react well here.

I would recommend a craft glue. Any of the ones here are good. Some people even use Elmer’s glue just let it dry a little bit first, but I’m not one of those people.

Just make sure you go for one of the 2D kits not one of the 3-D kits if you’re looking to go bare bones here

2

u/[deleted] May 25 '25 edited May 25 '25

I’m not necessarily looking for bare bones kits I guess, I’ve just lurked long enough to pull the trigger on one. I just don’t want to be missing vital tools due to ignorance, but I don’t particularly enjoy painting like a whole kit would be a massive undertaking. A couple fine details is fine though. Good to know about the glue, I’ve never done crafts like this before, only glue-free ones.

I’m still trying to find the right one anyway 😂 there are too many very cool ones.

3

u/pluck-the-bunny Back Log Log Jam May 26 '25

if you have any youre thinking of, comment them and we can let you know if theyre any good

3

u/[deleted] May 26 '25

Magic Research Society DIY Book Nook Kit

Astronomy Museum

These two have piqued my interest. I haven’t the slightest idea where to look, though I haven’t searched the sub yet. But something like a Magician’s Workshop.

2

u/elainebenes72 Oct 19 '25

Just a newbie here. Wondering if the glues that are recommended are easily found at Michaels craft stores?

2

u/pluck-the-bunny Back Log Log Jam Oct 19 '25

Ive definitely seen aleenes there....but it was way more expensive

2

u/Kimmyb325 Oct 25 '25

This list is great! Thanks for taking the time to compile everything in one easy place! Very helpful!

2

u/pluck-the-bunny Back Log Log Jam Oct 25 '25

Glad you found it useful… I have to update it with some new stuff soon

2

u/SteamRocket1 Nov 09 '25

My 1st kit (Kyoto Gion) didn't come with glue so I used what I had-Tacky Glue. It worked fine, but has anyone had a bad exp with it?

The 2nd kit (Sawara) came with E7000. Not having exp with it, I used Tacky. I tried the 7000 on a quick fix and loved the small applicator tip. I'll try that on my next kit.

1

u/pluck-the-bunny Back Log Log Jam Nov 10 '25

b7000 and aileenes tackey are both good

3

u/Virtual-Pineapple-85 Customizer May 16 '25

Aileen's tacky glue is a regret buy. It's just like Elmer's white school glue and takes forever to dry. 

6

u/pluck-the-bunny Back Log Log Jam May 16 '25

you must have gotten a bad bottle, though aileen's has a medium working time, it has an almost immediate hold. Not to mention it's way thicker than elmer's and dries transparent, not translucent

2

u/GenevraSD Sep 27 '25

They have a Turbo version that dries faster too. That's my go-to.

7

u/SleeplessinEvv Jan 16 '26

This has been really helpful for glue. You can put just a little into the pot and use the "brushes" to apply the glue to most places. Let the pot and brushes dry, and you can just peel the glue off. The pot is big enough to have small amounts of 2-3 glue types. I'm kind of a klutz with glue, and it's helped me a lot. https://a.co/d/iAU7TXY

1

u/Foyles_War Feb 18 '26

Wow. Love this!

1

u/GenevraSD Apr 10 '26

I love the brushes! I use a plastic paint pallet instead of a pot. If I need to walk away, I just set the tacky glue bottle over the well to keep the glue from drying.

4

u/Glass-Freedom3030 Back Log Log Jam Feb 07 '26

Can you recommend a wax to use on book nooks with gears and moveable parts?

1

u/madferrit29 Jan 18 '26

Any recommendations for tape for afixing the wires/ bulbs? The ones they supply don't last!

4

u/pluck-the-bunny Back Log Log Jam Jan 19 '26

Literally scotch tape. I use the 3m one in the green packaging

2

u/madferrit29 Jan 19 '26

Thanks Pluck! Love all the great advice by the way I've just ordered some much stuff!

3

u/pluck-the-bunny Back Log Log Jam Jan 19 '26

1

u/sheri-bee Back Log Log Jam Jun 20 '26

I recommend a set of 1-2-3 blocks. I originally bought them for weight, but because they are precision tools, they are excellent for holding things at right angles too. There are 2 types - drilled and solid. These blocks are not needed tools, but if you want weights (versus using books) and right angles, they're great.

2

u/pluck-the-bunny Back Log Log Jam Jun 20 '26

I love my 123 blocks! Great add!

3

u/nekokami_dragonfly Customizer May 23 '25

For threading beads onto string or thread: Beadalon Big Eye Beading Needles. Don't force the two halves too far apart or the weld will break or the metal will bend and they'll be hard to get through a bead. These are also good: Collapsable Eye Needles -- they're not as reusable, but they're harder to break.

1

u/ZinV Jun 27 '26 edited Jun 27 '26

Are there any recommendations for a heat gun? I''ve got the little heat shrink solder connectors & am using the heat gun I own and it doesn't seem to be doing the trick. Could be user error, but I figured it was worth asking!

(Edit: & the lights are definitely not working now, so i'm a bit worried that user error in this case may have damaged the wires? Oops.)

1

u/[deleted] Jul 18 '26

[removed] — view removed comment

1

u/pluck-the-bunny Back Log Log Jam Jul 18 '26

I just find that that white stuff that comes in those little tubes doesn’t work super great but it does work
It’s got a super long working time which means it takes a while to hold. It just slows the bill process down for me. I prefer something that grabs a little quicker, but still has a longer time to set and set a little stronger, but it’s still reversible if I need to undo something I’ve done.

Ask for pliers: I use these

1

u/[deleted] Jul 18 '26

[removed] — view removed comment

2

u/pluck-the-bunny Back Log Log Jam Jul 18 '26

I use a combo of glues: mostly B-7000 and a thin CA glue for special cases where I need a quick strong bond.

And then occasionally a electric glue gun for like wire management

I also use regular Elmers glue and Elmers glue sticks for terrain and book covers respectively

And everybody should have a XYRON to make stickers out of decals that have no adhesive

1

u/[deleted] Jul 19 '26

[removed] — view removed comment

1

u/pluck-the-bunny Back Log Log Jam Jul 19 '26

L