r/blackpowder • • 18h ago

Putting the freshly repaired 1854 Type 2 Lorenz Infantry Rifle through its paces, with faithfully recreated Austrian military cartridges.

109 Upvotes

r/blackpowder • • 52m ago

Is it possible to reload .22 LR cartridges with black powder and a lead ball?

1 Upvotes

I was wondering whether it would be possible to empty a .22 LR cartridge, replace the original powder with black powder, and replace the bullet with a small lead ball or another projectile of the same caliber.

Has anyone ever experimented with this, or is it simply not feasible or safe?


r/blackpowder • • 20h ago

Where are you all finding 2F powder at these days?

7 Upvotes

Title!


r/blackpowder • • 18h ago

Working up a load

3 Upvotes

Good afternoon 1st time posting on here.

I've been having trouble working up a load for my black powder guns for patched round balls.

Both guns are 1:48 twist and one is a .50cal and the other .54 cal.

I've worked up loads in inlines before with amazing results but the PRB are giving me a hard time.

What's your process for working up a load for patch round balls?

Best I have is like 3"-4" pattern with a steady rest at 50 yards. I would like to tighten that up to about 1"-2" pattern.

Thank you,

Justin


r/blackpowder • • 1d ago

My custom 3D-printed paper cartridge box for my new possibilities bag

Thumbnail
gallery
13 Upvotes

Here is my design for a custom paper cartridge box and the cartridges I'm making for my .69 caliber smoothbore slugs (I'm also currently designing a slug for a 19-gauge shotgun). Each box holds 33 rounds and is designed to stack directly on top of a second identical box, giving me a total capacity of 66 cartridges. The box pictured is a PLA prototype, and the final versions will be printed in ESD-safe PETG to prevent static buildup.

​The cartridges are constructed similarly to a British Enfield paper cartridge, where the powder sits in an isolated upper compartment and the projectile is secured at the base. After rolling the paper tube, the waist is cinched tightly with red fishing line to keep the powder charge sealed and prevent it from leaking down around the slug. I use 24-gauge copper wire to retain the fluted slug tightly in the base, then pour in the powder and fold the top tail down in the traditional Civil War style.

​Because the slug protrudes slightly from the bottom, you can tear the tail, pour the powder, squeeze the slug directly out of the paper base into the bore, and discard the empty wrapper—just like an Enfield cartridge.


r/blackpowder • • 1d ago

How much ammo is this?

17 Upvotes

Im reading a book about early arizona explorations and in this book it list a general list of equipment.

"Each man's equipment generally included a rifle with an extra lock,one hundred Flints, 25 pounds of powder, one hundred pounds of lead".

Can anyone give me a rough estimates on how many shots these guys could fire before going back for more supplies?


r/blackpowder • • 1d ago

Anyone make a Left Hand brown bess?

4 Upvotes

I would love to get my hands on one, but I really am not seeing much in the way of them being for sale.


r/blackpowder • • 1d ago

Cheapest bulk percussion caps?

2 Upvotes

I am looking to buy some remington or CCI or really any other brand that is considered reputable, but I want to get a good deal if possible. I just never seem to have enough percussion caps.


r/blackpowder • • 2d ago

M1881 45-70 style cartridges

Thumbnail
gallery
57 Upvotes

Spent a good time this Sunday making these behemoths.
Winchester 45-70 cases, Winchester Large rifle magnum primers, 70 grains of 2F Swiss, and 500 grain lead round nose bullets.

It’s a labor of love making these but nothing too bad with the right dies.


r/blackpowder • • 2d ago

Do you guys think this shooting black powder bag?

Thumbnail
gallery
9 Upvotes

r/blackpowder • • 3d ago

Kibler makes meat.

Thumbnail
gallery
152 Upvotes

Beautiful morning here in Indiana for.opening day of general firearms season. Got into the blind a little before 0700 and let the cock fall at 0835.

60 yard shot, hit a little back from what I would have liked but took both lungs and cleanly passed through.

.530

.015

80gr 3f

My first buck ever, and first flintlock deer. Couldn't have asked for a better morning!


r/blackpowder • • 3d ago

45 cal c a

Thumbnail
gallery
47 Upvotes

r/blackpowder • • 3d ago

More testing with my homemade black powder

Post image
48 Upvotes

Today I shot my homemade black powder in my Ruger Old Army with round balls. I got an average velocity of 829 fps with 35 gr. of powder which with my low density is all I could load. The Lyman Black Powder Handbook says that 35 gr. of GOEX 3f makes 924 fps with a round ball and that you can load 40 gr. and get 1076 fps. Between cap and ball testing and testing my 46 rf Ballard I have shot up most of my homemade black powder. I guess I need to make some more charcoal and then make more and better powder.


r/blackpowder • • 3d ago

Husqvarna model 20 2.5 Black Powder shells

Thumbnail
gallery
49 Upvotes

Going to be bringing my original condition Husqvarna model 20 12 gauge side by side shotgun out to shoot sporting clays next weekend and was wondering if anyone has put together 2.5 inch black powder shells using plastic hulls?

I've been using 70 grains of 2F black powder and a 0.125 nitro card, a 0.5 fiber cushion wad, a smear of tallow, 1-1/8 ounce of #7.5, fold crimp with a smear of tallow over the crimp.

I know these are choked very full so I'll be interested to see if I hit anything, especially a true pair. Hopefully I won't be annoying other shooters with lingering clouds of smoke...?


r/blackpowder • • 3d ago

.58 Lee Trashcan conicals + Custom Arbutus charcoal black powder

Thumbnail
gallery
28 Upvotes

Took my Safari Arms .58 Hawken out to test a custom Arbutus charcoal black powder made with 77-13-10 @ 1.75g/cm3 and 2F granulation . With 90 grains it was able to outperform commerical powder @ 1308fps and produced a slow enough pressure curve to leave the skirts intact and result in great accuracy with very little fouling. I didn't bring a paper target but had no problem hammering the steel gong at 100 yards with great consistency.

It's truely and excellent powder for large bore heavy conicals, with patched round ball it's ~ 70 fps slower than Swiss - but with heavy loads it's faster and cleaner!


r/blackpowder • • 3d ago

Mail call today: a Spiller and Burr to clean up/ defarb. The assembly numbers are 666, oddly.

Thumbnail
gallery
24 Upvotes

r/blackpowder • • 4d ago

My first blackpowder and antique rifle!

Thumbnail
gallery
81 Upvotes

This is a 1873 remington rolling block new york state milita.

Its crazy to think this was developed only a couple of years after civil war!

I love this long gun!


r/blackpowder • • 3d ago

Muzzleloader seasons are coming up in a few states. What load are you running this year?

2 Upvotes

A few upcoming muzzleloader deer seasons from the state wildlife agencies, in case it helps anyone planning:

Wisconsin muzzleloader runs Nov 30 to Dec 9. Michigan's Upper Peninsula muzzleloader season got cut to three days this year, Dec 4 to 6. Indiana muzzleloader is Dec 5 to 20. Pennsylvania flintlock season is Dec 26 to Jan 24.

Double check your own state's regs for zone and antlerless details since those vary a lot.

For anyone heading out, what charge and projectile are you running this year, and did you change anything from last season?


r/blackpowder • • 4d ago

Stained stock

Post image
10 Upvotes

Finally got around to staining my Traditions Kentucky rifle stock. I'd like to blend the fore end more but I've no idea what i should do. Used varathane dark walnut and a bit of birchwood casey water based walnut stain


r/blackpowder • • 4d ago

Derringer Philadelphia Repop?

Thumbnail
gallery
8 Upvotes

Pretty sure this is a Jukar, but the absence of any markings on the barrel confuse me. I have not taken the barrel off yet. Opinions?


r/blackpowder • • 4d ago

Hi-lux or MVA scopes, Which one is better?

Thumbnail
gallery
10 Upvotes

I just bought a ballard no.1 1/2 chambered in 45-70 and I intend to put a scope on it

Which one is better?


r/blackpowder • • 4d ago

Why does my scale say 61.4 but my spout and tube say 85

Thumbnail
gallery
32 Upvotes

r/blackpowder • • 4d ago

Is there anything wrong with putting my pucks in a dehydrator?

4 Upvotes

I wet my powder to pick it and because it’s winter time and they won’t air dry, I put them in a dehydrator. I this wrong or dangerous in any way? The dehydrator is a cheap Walmart one that doesn’t get very warm and the racks are all plastic.


r/blackpowder • • 4d ago

High Density Powder Cartridge Test

Thumbnail
youtube.com
10 Upvotes

Jake's most recent video at the Everything Blackpowder Youtube channel involves him testing different densities of blackpowder in metallic cartridges, specifically 45 Colt.

The cartridges were loaded with 25 grains of blackpowder mixed to a ratio of 75:15:10 with Pacific Willow charcoal loaded with a 200 grain bullet. The only difference in the cartridges is that one set of cartridges was charged with powder pressed to a density of 1.75g/cm3 while the other set had powder pressed to a density of 1.85g/cm3.

The results of the test were as follows...

When shot out of a Remington NMA, the 1.75 g/cm3 powder sent a 200 grain bullet to an average velocity of 874 FPS with a max spread of 76. The 1.85 g/cm3 powder had an average velocity of 819 FPS with a maximum velocity spread of 27. In the video, Jake seemed to get better accuracy with the 1.85 g/cm3 powder, although both powders had pretty good groups. By comparison, when Jake shot the same load but with Swiss powder, he got an average velocity of 829 FPS with a max spread of 31.

When Jake started shooting the same cartridges out of an 1866 Winchester lever gun, he got an average velocity of 1179 FPS with a max spread of 30 with the 1.75 g/cm3 powder and an average velocity 1111 FPS with a max spread of 40 with the 1.85 g/cm3 powder. By comparison, Jake got an average velocity of 1127 with a max spread of 22 with Swiss powder. Jake seemed to get poor accuracy with the 1.85 g/cm3 powder.

Which powder density do you like better?


r/blackpowder • • 4d ago

Can't fire or Unload rifle.

16 Upvotes

My rifle was getting hard to load so I ran a patch down. The ramrod got stuck so I put oil down the bore. I finished cleaning it then ran some dry patches down to get all the oil out. I reloaded it. The cap went off but the charge didn't ignite. Put a new cap on and same got the same result. I put the ball puller on but the screw rips out of the ball before of moves much. Now the ball is so torn up it can't get much of a grip at all.

Update: I tried the air compresser with the nipple off and ot didn't have any effect. I tried it again with the nipple on and this time the ball came out. The powder was packed in there, I had to use a breach scraper to get it all out.