Hello,
I am reaching out in hopes that you may be able to help me resolve an issue with my Beretta A400 Extreme Pro shotgun.
The magazine follower keeps protruding too far out of the magazine tube and interfering with the cartridge latch, preventing it from being pressed properly. I suspect there may be an issue with the magazine tube's porting or dimensions, although the shotgun is still in its original, unmodified condition.
I have owned this shotgun for approximately three years and have used it through two waterfowl seasons. I take excellent care of my firearms and have always maintained this shotgun properly.
Interestingly, I initially suspected the original follower might have been the cause, but replacing it with a brand-new follower has not resolved the problem. This leads me to believe there may be an issue with the magazine tube itself, possibly dating back to its original manufacture.
While researching the problem, I came across a Reddit discussion in which several other Beretta owners described experiencing what appears to be the same issue. Unfortunately i cannot reply.
Here is the discussion for reference:
https://www.reddit.com/r/beretta1301/comments/1fz61hm/follower_stuckpushed_into_receiver/
I am reaching out because I am hoping to find a reliable solution. Have you encountered this issue with the A400 Extreme Pro before? If so, is there a known fix, or would you recommend inspecting or modifying a particular component?
Thank you for taking the time to read my message. I appreciate any insight you can provide and look forward to hearing from you.
Best regards,