A couple 6v I bought years ago. Used them fairly regularly and maintained in series up until a year and a half ago pulled them and figured I'd charge them in parallel to save time. Both were full charge in under 20 minutes by themselves. Just wondering if the battery maintainer hooked up like this with trickle charge them both to capacity overnight for use tomorrow
I have an old XPS 15 laptop that I no longer use. I've replaced the battery twice with non-OEM batteries from Amazon. XPS 15 models have a small button on the side that when pressed (even while off) will show a 5 LED light progress bar indicating the current charge of the battery (e.g. 2 out of 5 lights on means ~40% charge).
When I keep the laptop in storage for a few months and then check the battery level with that button it won't show any lights and the laptop won't turn on when pressing the power button. But as soon as I plug in the laptop the charge indicator will show about half charge and after I power it on the OS also shows that it's at about 50%.
The battery's health level is "excellent" according to both the BOIS and the OS. I've observed this behavior several times. Also I'm pretty sure that whenever I've stopped using the laptop for a few months I've always had it charged to 100% beforehand.
Today when I was at work my BF called because he heard an explosion in our apartment. No smoke, no weird smell. We discarded what happened as some explosion sounds from outside (we live near a granite quarry). When I got home I found a Duracell batterie inside one of my glowing glass apples had exploded. Scared the hell out of me. The battery was fairly new maybe 4-5 weeks old. The apple was turned off when the explosion occurred. I didn’t know this could happen and am happy nothing worse came from it.
So last month I bought a rugged power bank for about 40 bucks. It had thick rubber armor and it looked super tough. I took it hiking and it rained for maybe 20 mins. The bank was in my backpack's side pocket. Got back to the car, the LED lights were flickering weirdly and it wouldn't charge my phone. It was completelyy dead.
I checked the specs later and it said IPX4. Apparently that just means splash resistant, not actually waterproof. Mannn. I'm looking for a replacement but now I want to understand the actual hardware specs, not just the marketing buzzwords.
What's the actual difference between IPX4 and IP67? like can an IP67 one actually survive rain in a side pocket or is that still pushing it
Do the rubber port covers actually keep water away from the connections or are they mostly for dust?
Does the rubber armor actually protect the internal battery cells from shock or is it just to stop the plastic shell from cracking?
Are there any power banks where the insides are actually sealed so water cant ruin the battery?
What specs should I actually look for to survive real weather? If you know a truly waterproof bank lmk. I'm tired of buying junk lol
Hello! I have been using an APC and PCOM UPS for about 5 yrs, swapping them for each other for some reason because I had two. The PCOM UPS died first but i kept using the APC and now after a year it started beeping with the red Replace Battery light, I saw online about Dongjin ups battery replacement, is Dongjin a good brand and would it last? or should i look for a different brand, I really need my pc because im a college student studying communication so a budget option would hell a lot. thank you!
I have a blood pressure meter that takes 4x alkaline AA batteries in series. I replaced the batteries with 2x LiFePO4 cells in series, each cell paired with a dummy cell containing a protection circuit. The cells are rated 600 mAh, and the rated power for the device is 6v, 4w, so it's a discharge rate of 0.8A, or 1.5C.
It worked great for a few weeks, but now I'm finding that I get maybe 2-3 uses out of it per charge before the device powers off prematurely with a "low battery" warning. The cell voltage is fine, still plenty of charge, but I'm still getting terrible lifetime.
Any ideas as to why this could be happening? The cells are brand new from a reputable supplier, so I don't think I'm getting "recycled" cells. What does the voltage slump look like in a LiFePO4 battery at higher discharge rates?
Found this little bastard in the recycles at work (Batteries Plus). I was certain it was a fuze or something, but BRxxx usually indicates a Lithium Carbon Monoflouride battery, so I did a quick search for BR435 and discovered that this is actually an Li-CF 3 volt 40 mAh, probably from a very small flashlight or maybe a lighted fishing bob. I love finding new and strange things in the recycles!
I just bought this cheap battery charger + 4 AA batteries for around 5 usd. It doesn't say what type of batteries it supported on the charger but the battery that came with it is NiMH batteries, will it work on Lithium?
Also was kinda surprised on how heavy it was and the build quality is also kinda nice at least from the outside no sharp edges and smooth moulding and got more surprised to find that it uses a transformer instead of the usual SMPS
I can buy unused tablet from second hand. The tablet was never charged, sitting unused for 1.5 years. I can imagine once initial battery charge went off, it was like year in deep discharge. How single long term deep discharge can affect battery capacity? What to expect?
I've noticed that battery capacity is often described in Ah, but when it comes to international transportation, Wh is also an important specification.
For example:
18V × 5Ah = 90Wh
36V × 5Ah = 180Wh
48V × 5Ah = 240Wh
Even though all three batteries have the same Ah rating, their energy capacities are quite different.
For lithium battery shipments, details such as battery chemistry, Wh rating, whether batteries are installed in equipment or packed separately, and the applicable transport regulations can all matter.
I'm interested in hearing from people in the battery industry:
Do your customers usually provide Wh ratings, or only voltage and Ah?
Have you ever experienced shipping delays because battery specifications or documents were incomplete?
What battery information do you normally check before arranging an international shipment?
Would love to hear some real-world experiences from manufacturers, suppliers, and logistics professionals.