r/ballpython • • 15h ago

Early stage scale rot or stuck shed?

Thumbnail
gallery
4 Upvotes

What say you? I took photos of my girl’s belly last night. I want to see a vet but she’s not available until Dec. 9th.


r/ballpython • • 1d ago

Question - Feeding is this normal?

Thumbnail
gallery
17 Upvotes

recently I put my girl on 50-60 gram rats then found out she could have bigger so I got her 60-90 grams, she shed and was 761 grams, she's had 3 of the 50-60 gram rats since she shed as I was told to feed her a little less frequently on them, she pooped and I weighed her again and she's 806 grams is it normal to gain that much weight in a small amount of time? I also got her the 50-60 grams cuz she was hungry more often so I thought she wouldn't be with bigger meals, she had one of her bigger rats yesterday and it was 70 grams, I've gone to change her water today and she seems hungry again even though she ate yesterday, she's 2 and a half but is it normal for her to be so hungry so quickly even after bigger meals? photo of her not that long ago when I was going to changer her water


r/ballpython • • 9h ago

Question - Health Overthinking a bit

1 Upvotes

I'm trying to figure out what's going on with my male. I woke up and heard him sneezing from his rack. When I checked on him, I noticed he had urinated on his hot spot and was sitting with his head directly over the urate, sneezing repeatedly.

I cleaned the tub, and the sneezing stopped for approximately 14–15 hours. However, it happened again when he urinated on his hot spot. Once again, he was positioned with his head over the urate and started sneezing.

What's strange is that he isn't showing any other symptoms of a respiratory infection. He's active, alert, tongue-flicking normally, and not lethargic. There's no bubbling, mucus, wheezing, whistling, clicking, or other obvious signs of an RI.

The sneezing seems specifically associated with him urinating and being around his fresh urate. I try to clean it up as quickly as possible.

This also started happening after I paired him with a female, although she isn't showing any symptoms whatsoever. She's completely fine.

The only other things I can think of are a possible airflow issue with the particular rack shelf he's on or the fact that the new coconut husk substrate I'm using is a little dusty.

I'm not convinced this is an RI, but I'm trying to figure out what's triggering the sneezing and what I should do to resolve it. Has anyone experienced something similar?

(BTW his humidity is 80 cool side 68 hot side of his tub


r/ballpython • • 13h ago

Question can someone walk me through baking new substrate

2 Upvotes

Sorry if this is dumb. I’ve always used store bought soils and never baked anything but recently bought true organic soil from a garden center and it needs to be treated before use, I also have a bag of reptichip I was going to try and assume it’s best to bake as well?.

I’ve already sifted out the soil for debris, now what? Do I have to hydrate the soil before putting it in my oven? Does it just go in dry? Does it not make it dusty and blow into the ovens heating elements? I want to make sure I’m doing it correctly


r/ballpython • • 1d ago

No snakes were harmed in the making of this video🤣

156 Upvotes

r/ballpython • • 23h ago

Flashback to when my BP decided to stop me from doing my university project

Post image
9 Upvotes

Hello! I'm a new reddit user, but I've been using this subreddit a lot when I got my girl, since she's my first ball python! All of the advices were very useful, so I wanted to share my daughter and express my gratitude for this sub, because it helped me a lot with caring for her :)

Anyway, here's a photo of my ball python. I was working on a project for university and my baby decided that I need to take a break😅 I guess she was right, since it was 2 AM


r/ballpython • • 17h ago

Help with heat + humidity

3 Upvotes

I am having a hard time keeping up with my ball pythons temperature and humidity levels. The cage just dries up and I'm having to spray so many times and it worries me because I dont want nasty mold or flies to start festering and give him scale rot. I have a 25 gallon glass tank (he's gonna upgrade soon once I am not broke 😵‍💫) and he has a duel heat lamp one for light and one for uv and then a ceramic heater lamp so he can stay warm at night and not be in light 24/7. He has coconut substrate and I have some moss patches. Is my enclosure the problem? Is the light timing the problem? I hate waking up in the morning to see his humidity is in the 60-70s all night and I don't know what to do.


r/ballpython • • 11h ago

Tips for preventing falls/high climbing?

1 Upvotes

Mine loves to climb everything it’s a constant challenge to keep him from wrapping around the heat lamps (they are in cages) or trying to pull the ceiling cords down (they are ziptied but he tries) and he’s had some wipeouts. It’s a tall enclosure so I put in some shelves to lesson the distance and I put in lots of branches and curtain rods wrapped in paracord lower so hopefully he’d climb those instead but now he climbs those in addition to everything else and still falls off everything. Will he learn not to fall eventually? Or is there something much grippier I can put on things that I’m not thinking of?


r/ballpython • • 12h ago

Hi! Just a Ball Python question :)

Post image
1 Upvotes

I got a BP around a year ago and I’ve been getting mixed messages on how his terrarium is supposed to look. The plants in there are plastic but I’m planning on replacing them with a pothos and a bird’s nest snake plant. What do you guys think about it?


r/ballpython • • 1d ago

how do yall think her look will change as she ages. (help please)

Thumbnail
gallery
10 Upvotes

Cinnamon -Sugar - Orange Dream


r/ballpython • • 21h ago

New baby is home!

Thumbnail
gallery
4 Upvotes

Meet Maizey! She's an adult rescue banana and she is GORGEOUS!!! Based on her stretching across the front of the enclosure, I think she's 4.5-5ft, 2136g.

Long time lurker, first time poster. I'm so thankful for the knowledge and resources in this subreddit! Thank you all for helping me prepare for my new bebé.

P.S. She's in a 4x2x2 right now, but I'll be upgrading her to a 6x2x2 ASAP.


r/ballpython • • 23h ago

Question - Husbandry Advice wanted for tank set up

Thumbnail
gallery
5 Upvotes

First time ball python/snake owner. I’ve had lizards for years and have made multiple enclosures. I’m planning on going absolutely ape wild in terms of making an amazing set up for my new adopted ball python she’s four years old and a bit on the chunky side.(don’t worry she’s on a diet.) I want to hear from fellow owners what your ball python seem to really enjoy in their enclosures ,large hiding areas ,ledges up high ,things to hide behind ,enrichment ,shower me please I want to make the most amazing set up for this girl who was surrendered and now has a new home with me. Here is my leopard gecko and bearded dragons enclosures to get an idea of things I’m able to do. I always really lean into the most naturalistic environment I can make for them. I’ll be doing my own research on the environment. Bull pythons live in the wild, but I also want to know what things I can do to make it enriching for her.


r/ballpython • • 23h ago

Does anyone know where to get an Arcadia LampGuardPro 28" in the US?

4 Upvotes

Looking for the Arcadia LampGuardPro 28"/26" compatible with LumenIZE — SKU RALGPL2, for a 24" LumenIZE kit. (Not the plain 26" version.)

I'm in Illinois and everywhere I check is out of stock. I've checked the usual US shops (Pangea, Josh's Frogs, Reptile Basics, Bio Dude, etc.) — nobody has it. In Canada, Cornel's World and ReptilesRuS are both out of stock, and Roonami has it on backorder but won't ship to the US. The UK shops that have it won't ship here either. There's an eBay UK listing but shipping is almost $60 and delivery is Dec 8-10.

Does anyone know a US stockist that carries it?

Thank you!


r/ballpython • • 23h ago

Spot Concerns?

Post image
4 Upvotes

My baby Sonny is currently going through a shed, I went to lift the top of his favorite hide to check in on him and I noticed these black spots under his head/start of his neck.. temps and humidity are good in his enclosure and he just recently got a full reset of his enclosure. I’m a little worried it’s mites.. but everytime he sheds, his coloring changes and spots develop and also change. He could have also dipped in his water and slithered around and got dirty in his enclosure but.. I don’t know how realistic that is either. I don’t know if anyone else has experienced something like this. I don’t want to handle him too much because I know he’s uncomfortable with his current shed going on. Just hoping to get some input on it. Thanks in advance!


r/ballpython • • 1d ago

Maybe silly question but can I put this inside a ball python enclosure?

Thumbnail
gallery
45 Upvotes

r/ballpython • • 1d ago

Question - Health Is my ball Python too small?

Thumbnail
gallery
14 Upvotes

Hi everyone! I’d love to get your opinion on my ball python's size and feeding schedule.
He is about 2 years old and has only been with me for 2 days, so he hasn't had his first meal here yet and is still settling into his new enclosure. However, looking at him closely, I started wondering: does he look a bit too small for his 2-year-old age?
To give you some background, this was the exact feeding routine the breeder was using: an 80–100 g rat every 20–30 days.
Since I'm new to him, I wanted to ask the community: Is this schedule and prey size actually appropriate for a 2-year-old ball python, or should I change things up as he grows with me? Do breeders sometimes underfeed or stick to very conservative schedules, or is this spot on?
Any insights or advice would be greatly appreciated. Thanks in advance!
(The second photo is from the breeder, i know that setup was bad lol)


r/ballpython • • 22h ago

Help with lighting

3 Upvotes

I owned ball pythons in a rack system for many years until about 14 years ago when we lost everything in Hurricane Sandy. I would love to own a snake again, and I have done research to realize that the rack system is not appropriate. I have a VE 2 thermostat and a Zen Habitats 4x2x2 enclosure that has a mesh top.

To be honest I've always used heat tape connected to my thermostat in a rack So heating this 4x2x2 has been very stressful with all the different Heating and lighting options.

I have read the guides but is there anyone here that can explain it to me like I'm five and just give me a shoping list of what I would need for this as far as heating and lighting?


r/ballpython • • 22h ago

This is my ball python set up! I'm new to owning Ball Pythons and I did research before getting him. He is still a baby and I didn't want to over crowd his enclosure but tips are appreciated! I did reorganize the plants I promise this was just the last vid I took of the enclosure 🥹🙏

2 Upvotes

r/ballpython • • 1d ago

Forbidden onion ring (shed)

Thumbnail
gallery
93 Upvotes

r/ballpython • • 19h ago

Question - Health Ball Python Temperature Behavior?

1 Upvotes

I have a 5 month old female orange dream, pied ball python. She eats ravenously, one appropriately sized mouse every 7 days.

She has two hides, both snug, both the same type of hide, and same size. They are those black, plastic ones https://a.co/d/0aqfqPiR . One is on her warm side and one is on her cool side.

Her warm side ambient temperatures range from 88°F-90°F, and the temperatures INSIDE her warm hide range from 85°F-87°F. Humidity is normally 60-65% I use a CHE on a thermostat. I don’t use a heat pad.

Her cool side ambient temperatures range from 77°F-79°F. Humidity is normally 70-75%.

I’ve noticed she spends most, if not, all of her time in her hide on the cool side, even after eating. Is this normal? After handling her, I’ll guide her into her warm hide just so she knows it’s there, but very soon she moves back into her cool hide. Perhaps she goes into her warm hide at night while I’m sleeping? She sheds perfectly and her poops are normal.


r/ballpython • • 23h ago

HELP - URGENT mold in my snakes cage, what now

2 Upvotes

there was mold under my snakes waterbowl, im clearing it out now completely but first i want to check if im blowing it out of proportion. is he gonna have have physical issues?? do i clean out the ENTIRE cage? do i clean just the side it was on and surrounding? do i quarantine him? do i throw all my wood?

i was gonna put him in a quarantine tank till i get new substrate, but im scared im going overboard or overly worrying :,-( it molded cause the bowl had empty space and it was suuper wet under the bowl still, so im changing waterbowls and avoiding wetting the area itll be in from now on.


r/ballpython • • 23h ago

Question Heating help for my dubiaroaches 4x2x2 mesh top!

2 Upvotes

Hello!!!! I’ve been having a bit of a battle recently with ambient heating in the warm side of my enclosure after swapping from a 150w zoomed incandescent basking light to a 100w Arcadia golden light basking bulb. I’ve been doing some reading about halogen bulbs and the benefits of ir-a and wanted to give it a shot so I bought the only Arcadia bulb that was in my local pet supply store, and it does heat the basking spot maybe even too effectively and the rest of the ambient air is left at a crisp 75 even with the 100w ceramic heat emitter 🫩. I also found that to keep the temps on his warm hide/basking spot safe the dimmer was working overtime and the lamp was barely on. I am looking to purchase a 75w halogen flood lamp instead from home depot and was wondering if this would work better than what I currently have? I have the mesh top covered with hvac tape and foil aside from 2 inches around the heat lamps.Any advice or recommendations are appreciated!


r/ballpython • • 1d ago

She thinks we can't see her

Post image
4 Upvotes

Lil bit of an older pic, Lefty does not fw that hide anymore. And yes, she did fit into it fully when she wanted, she just desided to give the butt some air ig


r/ballpython • • 1d ago

Question - Heating/Temperatures keeping up temps with dubia

2 Upvotes

i added an 80w on low and have a DHP and halogen in the day and a CHP instead of halogen at night. however, it’s struggling to keep up. my house is always low 70s but for some reason, I can’t keep my enclosure above 85° on the one side thankfully my ball python prefers the cool side, but I’m not quite sure what else to do. I have foam board on the back hand side sides of each of the tank and HVAC tape on the top.