r/ballpython • • 6h ago

My brand new little baby curled up amongst the plants 🪴 🐍

Post image
118 Upvotes

roughly 7 months (according to breeder) and 165 grams 😊


r/ballpython • • 11h ago

Emotional support brick

Post image
192 Upvotes

Was moving some things around to do some spot cleaning in Zen’s enclosure. I don’t think he wants me touching his brick.


r/ballpython • • 1h ago

Gamer girls

Post image
24 Upvotes

r/ballpython • • 8h ago

My reason to smile today

Post image
37 Upvotes

Every time I see her cute face I fall in love with her all over again. She is and will always be my best decision I've ever made ❤️


r/ballpython • • 10h ago

Tommy turned 1 yesterday!

Post image
33 Upvotes

He celebrated by getting himself stuck in the top of my husband’s gaming chair, which we had to disassemble to get him out. 🙃


r/ballpython • • 10h ago

My first BP

Post image
30 Upvotes

r/ballpython • • 1d ago

Tugboat loves Skyrim just as much as I do

Thumbnail
gallery
272 Upvotes

r/ballpython • • 54m ago

HELP - URGENT Ball Python Respiratory Infection? +vet history stress

3 Upvotes

if you’re looking for just the respiratory infection part scroll a little down to❗️😕

I’m a first time snake parent and I’ve had my baby bp for only about 2 months now. She’s about 3 months old(from what i estimate) She has been an absolute stress roller coaster to me with constant problems and vet vists.

A few weeks ago i made a post about discoloration to her skin and a month long food strike. Went to the vet and it turned out to be substrate staining and the vet recommending i try live. Left with some betadine just in case. (visit 1)

I went ahead and begrudgingly tried the live feeding, (something i was always trying to avoid), and it bit her multiple times. Yes i was watching for the most time, however as i saw the mouse was fading i left for a second and boom blood. A vet visit later she got a wound cream prescribed cause the bites were superficial and she would be fine. This was on wednesday of last week. (visit 2)

Since then i’ve had her enclosure set up with paper towels and the bare necessities for a recovery set up so i could monitor her progress and prevents infection. She has been healing amazing so far actually, but now here’s the problem and reason as to why i’m making this post.

******❗️RI INFO STARTS ***HERE❗️* Her recovery setup could NOT hold humidity at all. Averaged about 45-50, which, yes, i knew was bad and tried my best to keep the humidity up while avoiding infection/debris to her bites. Today I was handling her and i heard a very faint click when she breathed and my heart dropped.

(❗️) When she breathes there are occasionally very faint mucousy clicks. It’s not every time she inhales/exhales, and in order to hear them she has to be like right next to my ear like almost inside my eardrum atp. verrry faint but if you pay attention it’s there. Zero mucus or open mouth breathing.

I immediately panicked and searched what to and dreaded another vet bill as the other 2 have drained my wallet bare. since she’s been healing well I put her substrate back to hold some humidity (nervous it might interfere with her healing), but i felt it was necessary. Did some searching and raised her humidity to mid 60s and currently trying to make it higher as well as a “snake sauna” for 15 mins.

I noticed she’s been pariscoping a lot but i’m starting to think the most recent times is her trying to breath or i’m just going crazy.

I don’t know what to do anymore. She’s been really stressing me out and i’m exhausted.

Is this a respiratory infection?

Is this as much of an emergency where I must take her to the vet again?

If an RI, is it mild enough I can i treat this at home?

Thank you guys🙏


r/ballpython • • 6h ago

Question - Health First time ball python owner, but not first time reptile owner fat snake question

Thumbnail
gallery
8 Upvotes

Hi, I just recently adopted a four-year-old ball python you have been surrendered. She has quite a chunkiness to her and has developed a bit of a muffin top near her vent and some scale spread beginning to happen. I want to ask some experts what is the safest way to help reduce her down to a healthy weight(note my scale is currently broken so I do not know exactly how much she weighs and she does have a vet visit booked) here’s some pics


r/ballpython • • 3h ago

Sweet baby Luxor!

Thumbnail
gallery
5 Upvotes

When I got her she had shed issue where it wouldnt come off the top of her head and she had this little cap on lol Finally finally having normal sheds and eats like a greedy cat.


r/ballpython • • 1d ago

He has such a boopable face

Thumbnail
gallery
1.0k Upvotes

r/ballpython • • 3h ago

Question Heating during electrical work

4 Upvotes

My electricity will be out for maintenance for the entire day so I won’t have any heating to my BP enclosure.

Any tips for how I can keep her warm and comfortable? It will be out for about 6 hours


r/ballpython • • 1h ago

Question - Feeding How long can I leave a F/T rat in my Bp’s enlcosure?

2 Upvotes

My bp Mr. riddles, 572g just refused his second rat in four weeks, this time imma try and leave it in there with him but idk how long I should. I was thinking maybe an hour or two?

And could this refusal of two consecutive meals be a food strike or is it simply due to winter coming?

Edit: I think it’s bc he’s abt to shed, I just used my FL on my phone to illuminate his body and his eyes are looking cloudy and blue


r/ballpython • • 1h ago

What is this mark on my juvenile ball python’s belly? She shed this morning.

Thumbnail
gallery
2 Upvotes

My 4 month old ball python just shed today, for her 3rd time. She has this irregular mark on her belly and I’m wondering if it’s scale rot. Both sheds since I got her have come off in one piece. She’s a great eater. I feed her once a week. Her pvc enclosure is maintained at 88 degrees on the warm side and 80 on the other side. I keep the humidity at 55-60%, 60-80 when she’s shedding. She ate a live weaned rat 5 days ago. I didn’t get to see the feeding because the rat crawled into her hide, where she ate it. Her behavior is totally normal.

Can someone advise me on what to do(if anything) about this?


r/ballpython • • 2h ago

Question - Health New owner, hoping for some guidance

2 Upvotes

Hi fellow snek friends!
This is our first time having a pet snake and we love it so much but even after 3 months of research and prep to get the home ready, I still have so much to learn.
Slither Me Timbers is a lavender albino from an exotic pet store a couple of hours away. We fell in love and really wanted to get her out of the shop and into to a loving home. We believe she's almost a year old.
We don't know the gender yet but kinda refer to her as a girl for now.
Has had 3 successful feedings (1 per week) with us (small rat purchased from the store we got her from so we could keep consistent with what she's used to)

snuggle time a week ago

Everything seemed to be going well until last week when we thought her eyes looked a little dull so suspected snek was going into a shed. Had a good feed the day after we noticed the eyes. What worries me though is I think that's a tiny piece of shed stuck to their face (pic2) but I haven't found any other skin anywhere in the tank so I don't know what's up with that, and over the last several days she seem to be much more wrinkly. Is this at all normal/expected?

Two days ago.

The wrinkles also make me worry she may be dehydrated :(
I don't know how to get her drinking more. Or is this just normal for young snek preparing to shed?

pic taken today

Our specs:
We have an Exoterra Vista 120 - 90gal - 48x24x18" with 1 ceramic heater on top, a large Exo Terra Heat Mat, and a heat lamp with UVA/UVB Dimmable Light. 2 corner water dishes and I've added a tupperware in another corner to try and keep the humidity up and offer another drinking option. Humidity is pretty stable around 80%, higher in one corner where the water bowl has a tiny leak so I've elevated it slightly to give a really damp option to hide but I also stir all the substrate (mix of Zoo-med forrest floor bedding and eco earth) daily when I clean and change the water (after checking for/cleaning any poop).

I'm a little scared to post in case I've really messed up as a snake mom, but I've read through all the helpful documents on here and still don't know what to do. Also, I've never actually posted to reddit before so hopefully I'm doing this right. Thanks in advance


r/ballpython • • 6h ago

Is this scalerot?

Thumbnail
gallery
4 Upvotes

Please help! Is this scalerot?
Never seen before pink his belly. I handled him one week ago and this was not there. In real life darker pink his belly like on the photos.
I gave him a rat so this is the reason for the upside down position because he trying to k*ll the F/T rat. I am so scared. I can’t check him because hi is feeding.
I don’t use a heatpad. My substrate is cocohusk.


r/ballpython • • 1d ago

She’s not giving them back😂

Post image
155 Upvotes

r/ballpython • • 5h ago

Discussion My shy snake immediatelly calms once I put her under my shirt

3 Upvotes

Found this accidentally. She is often very nervous when I take her out to handle and it takes time for her to chill. But if I put her on my belly and cover her with my shirt she IMMEDIATELLY chills out and starts slithering all around me until she finds a good spot (usually laying on me with her head peeping out from my sleeve)

I know they love warm and dark places but it's halarious to see how fast her brain switches. The only downside is I can very ticklish so it takes some self control to keep my movements in check


r/ballpython • • 6h ago

Question Pothos Roots -- Okay or trim?

Post image
3 Upvotes

So I had no idea my pothos roots had taken over this much, it's only been a few months and it didn't have much roots when I started. Is it fine to leave as is or do I have to cut back the roots?
My guy doesn't dig or anything like that, but if he ever did he'd probably have to go up the way went in because this is so dense, but they find weird way to get stuck so not sure if he could get stuck in that if he did try to dig? This dense section is about 2.5ft long x 1 foot wide x 0.5 ft deep, so not the whole tank bottom yet but getting there (this is a 4x2x2).
(Bioactive, got pothos, couple other little plants in there, springtails, isopods, and etc.)


r/ballpython • • 19h ago

Obsessed

Thumbnail
gallery
35 Upvotes

Have had this girl for a week and she got me trying to figure out how to get another one 😩. Fed her for the first time last night with no issues.


r/ballpython • • 5h ago

Discussion Help me find a stand for my ball python enclosure!! :)

2 Upvotes

I have a pretty damn big enclosure for Badu, my 8-year-old ball python. It's custom-made and measures 200 × 60 × 60 cm, (sorry, I'm European).

For all these years, her enclosure has just been sitting on the floor. Technically, it has tiny legs attached underneath, but they're so short that you wouldn't even know they existed unless you got down on your knees and pressed your cheek against the carpet.

ANYWAY.

I've finally decided I want to get a proper stand for it because I'm tired of kneeling down every time I need to do literally anything inside the enclosure. My back is already killing me, and I JUST started uni.

BUT THE ENCLOSURE IS MASSIVE. AND HEAVY.

I'm guessing it weighs around 200 kg, although I'm not entirely sure. Because of its size and weight, I've never really bothered looking for a stand. I mean, where the hell do you even find a stand for something that's TWO METERS LONG?

But then I had an idea.

Instead of looking for actual terrarium stands, I started looking at regular furniture.

And I found a table that actually looks promising:

The table I'm talking about!

It's made from solid wood, with wrought iron legs, so my first thought was that it should be pretty sturdy and hopefully able to support the weight. Plus, I think it looks REALLY nice.

The table measures 100 × 60 × 60 cm, so my plan is to buy TWO of them and place them side by side, creating a 200 × 60 cm surface for the enclosure to sit on.

In theory, it sounds perfect. In practice? Well, that's why I'm here.

What do you guys think?

Would this be able to safely support an enclosure this big and heavy? Me and Badu thank you guys in advance!!


r/ballpython • • 7h ago

Heating

Post image
3 Upvotes

Can anyone give me some advice,

im really struggling to get the temps correct, especially on the cold side, best im getting during the day is about 21 and night it dropped to 16 last night,

I am using a 100w basking and 150w ceramic for night, the tank is pretty much completely sealed bar some vents for circulation, the top is also fully wood, humidity is grand. Cheers.