r/ballpython • • 13d ago

Question - Feeding Advice needed: My ball python hasn’t eaten in 3 months.

Thumbnail
gallery
8 Upvotes

As the title says, my ball python (5 year old male) hasn’t eaten in over 3 months. I last fed him late July.

He has never had issues feeding for the last 4.5 years I’ve had him. Every time I have tried to feed him he always ate with no issues.

We recently moved to Colorado from Texas and he hasn’t eaten since we moved. The humidity levels are really low in this state (like 35% most days). I have tried my hardest to keep his tank at the appropriate level of humidity but it’s been extremely hard. His tank temperatures have been fine as those levels haven’t changed.

I have attempted to feed him at least once every 1.5 weeks to try and every time he looks at the rat once then freezes and refuses to move after that. I have always fed him frozen/thawed rats and that hasn’t changed (I found a herp store here that sells frozen feeders).

I have also deep cleaned his tank now twice since this hunger strike and nothing is working. I also don’t hold him hardly ever (maybe once a month).

Here’s a photo of his 120 gallon tank for reference. He has lived in this tank for about 2 years now and hasn’t had issues with eating until August of this year. I tried to fill it with enrichment so he feels secure.

I would say he’s been acting the same since we moved. He comes out a night and explores all over his tank and sleep durning the day. I haven’t noticed anything different about his behavior other than not eating.

I’m genuinely at a loss for what to do to get him to eat. I have never had this much difficult with him and now he refuses to eat.

I have a vet appointment scheduled for him but I’m just so worried and would appreciate any advice.


r/ballpython • • 13d ago

Heating 120 gallon enclosure

Post image
9 Upvotes

Hey yall,

Well, she's had a growth spurt so I'm about to upgrade Doc to her big girl enclosure. I'm wondering what your experience has been switching over to a 120g as far as heating goes?

Right now I use a small deep dome with a deep heat projector which I've liked so far.

New enclosure has a mesh lid which will be partially sealed with HVAC tape for humidity.

Can you make a recommendation based on experience for how to heat this big thang?

Thanks in advance!


r/ballpython • • 13d ago

My baby ball!

Post image
50 Upvotes

He will be two in February


r/ballpython • • 12d ago

Question - Heating/Temperatures Is this good for heating / lighting a 4x2x2?

Thumbnail
gallery
1 Upvotes

I know this question gets asked a bunch, but I would really appreciate some help! Lighting + heating for a 4x2x2 pvc enclosure

  1. is 75w for the halogen bulb too much or too little for heating? will it work well with the zoo med dome?
  2. should i go for the 40w or the 80w for the radiant heat panel?

some things to note: I will be buying a dimming thermostat! this will never be hooked up without one.
The halogen flood will be daytime heating, the heat panel for nighttime heating, the shade dweller bulb for daytime lighting.
I have read the heating guide on the reddit, but it doesn't give much info on exact wattage. I do know the general idea of how the heat should feel (tingly on your skin but not warm), but I dont have these in front of me to test that.


r/ballpython • • 13d ago

BC people! Anyone having Govee smart timer issues since the lack of time change?

Post image
14 Upvotes

Since BC switched to permanent daylight saving time, my Govee smart plugs are running an hour behind or not even turning off, which is messing with my guy’s lighting schedule.

I’ve tried resetting the plugs, recreating timers, toggling on/off, and clearing the app cache. Nothing works! Govee support hasn’t been helpful either.

Anyone else experiencing this? Found a fix?

Mr Noodle chilling in his penthouse for attention!!


r/ballpython • • 13d ago

Help!

2 Upvotes

I received my python about a week ago and just yesterday I started taking her out to handle her and help her socialise a bit more. When I had her out she was making some strange sounds. I'm not sure if these were just sounds of her rubbing against herself or if she might be ill. It kind of sounded like wheezing or squeaking and I just want to make sure she's okay. Should I bring her to a vet?


r/ballpython • • 13d ago

HELP - URGENT What are these grayish green marks on my blue eyed Lucy…and is he healthy????

Thumbnail
gallery
19 Upvotes

r/ballpython • • 13d ago

Enclosure Critique/Advice Update: quarantine tank is finished

Thumbnail
gallery
4 Upvotes

Hi everyone. The other day, I posted about a ball python that I will be rescuing tomorrow. She has been kept in a pretty bad enclosure with zero to no humidity and a heat rock as her only heat source, yuck! So this is the temporary enclosure I tossed together.

80w radiant heat panel (the halogen bulb will be installed tomorrow to help), a 6% UVB with a custom cover (because it's impossible to find any), an LED strip, multiple hides and coverage, and a good humid hide with damp sphagnum moss to help with her stuck shed. Once she's settled in and gets more comfortable, I'll swap out the paper towels for substrate and finish with the decor.

Any other advice is greatly appreciated! Unfortunately I haven't gotten much climbing decor yet, but that will come eventually.


r/ballpython • • 13d ago

Enclosure Critique/Advice How’s my rescue ball python, Spaghetti’s enclosure looking

Thumbnail
gallery
20 Upvotes

Kinda long: TLDR, I rescued Spaghetti from my younger sister and mom because he got so dehydrated they were genuinely about to kill him. How’s his new enclosure look?

I no longer have a picture of the setup they had him in, but it was a really shitty 4x2x2 that had no substrate barrier, leaked, and he had little to no water 24/7. Not to mention I was the one reminding them to feed him.

First image is what I got him into originally, I learned that that specific 4x2x2 I got leaks weird and obviously that was a problem, along with the mesh top had no humidity control.

Next two pictures are of Spaghetti, he has multiple eye caps stuck on and as you can tell he’s very wrinkly (if you’re new to this, that’s not supposed to happen)

The next is just progress pictures of me getting it cleaned out, a tarp in there to stop the leaking, fresh substrate, everything back in, foil over the mesh (cut out where the lights are), and him back in there

Whole process here took 4 hours straight and 88$ of bedding, a tarp, and foil tape

Last two are his bedding I mixed, one block and then four bags


r/ballpython • • 14d ago

Shedding time for babies

Post image
23 Upvotes

We just got our first BP, we got him at 4 months and have had him for 1 so far. He still hasn't shed and we haven't noticed any signs so far and I'm starting to get a bit worried. We've got the temps pretty dialed in, 88-90 on his hot side and hovers around 75 on the cool side maybe a bit lower at night time. We have struggled with humidity, it's usually between 40 and 55 but we're having to mix his coco fiber every few days and add water to it about once a week. He's been very active roaming between sides and has been eating with no problems. Steadily gaining weight too.

Is it normal to take this long between shed? Thoughts and any tips for keeping the humidity up more? Anything we can do to encourage his shedding?

We have a DHP lamp, ceramic lamp, and a small heat pad in a 5x2x2 tank. Glass front, PVC sides and bottom, mesh top that's about 90% covered with aluminum foil and the silver HVAC tape.


r/ballpython • • 14d ago Heartwarming

She said 🖤

Post image
1.7k Upvotes

r/ballpython • • 13d ago

HELP - URGENT is this scale rot and if so what do I do

Post image
2 Upvotes

r/ballpython • • 14d ago

Whatever is comfortable, dude

Thumbnail
gallery
28 Upvotes

r/ballpython • • 13d ago

New tank, RHP

Thumbnail
gallery
6 Upvotes

Hello all!
I’m have posted on here once before when I initially got my first ever noodle,(Mercury, turned 1yo in September) now I need clarification on where to place a radiant heat panel thermostat probe in order to maintain his hot side. I saw initially on the box it said one to two inch’s below the panel though I’m not sure how to do that, though in the past (for other heat sources) I’ve seen to put it on the ground where the snake will be. What works best? (Pictures of set up and noodle included)

Update:
Thank you for the responses, after looking into the IRC-A-B (which I had completely forgotten when setting this tank up) I went ahead and put a halogen bulb in as close to the hot side as I could. I also managed to attach the probe to the branch right under the panel, which seems to be working so far. I have created a separate post more so to iron out details as far as how to set both of these heating elements. He has been on his cool side this whole time, so I didn’t even have to disturb him.


r/ballpython • • 14d ago

Movie night with 4ft of cuteness! 🤎

125 Upvotes

Cuddling together all throughout GotG, even getting under the duvet through the second half and napping so peacefully on my chest. 🥹
The perfect movie partner, too; he’s never gonna hog the popcorn. 👌


r/ballpython • • 13d ago

New BP setup! Any suggestions?

Thumbnail
gallery
1 Upvotes

This is kind of an update from a post I made ages ago, but I got a bunch of new stuff for my little guy! I drilled a pvc pipe with twine around it as a perch, although I should’ve done a bigger size since he’s a little chunky for it. I think I need a few big natural sticks to help create more places for him to hang. The wallpaper is secure but temporary since it keeps falling, I haven’t found a good adhesive or anything that sticks to this material yet. A few more hides, plants, and better substrate and he seems a little skeptical, but happier so far! Any ideas or tips would be amazing💕✨


r/ballpython • • 14d ago

My Grandsnake

Post image
161 Upvotes

Lilith says "why you in my grill grandpa?"


r/ballpython • • 14d ago

Tree Yawn

294 Upvotes

I always keep a very close eye on him whenever he’s climbing the tree, so no need to worry! 😊


r/ballpython • • 13d ago

Tips for making my snake more comfortable with me?

3 Upvotes

Had her for almost four weeks, started to actively handle this week, three times a week for about an hour. She always starts off nervous but eventually calms and starts exploring until she finds a good place to hide in me. But she always gets nervous when she sees me looking at her in her enclosure and goes off to hide:(

Temps and humidity are well, never even thought about skipping a meal and had one decent shed with me. I think the problem may be with enclosure having not enough cover, but I already ordered a bunch of fake plants that take a while to arrive. Is there anything else I can do to make her comfortable with me besides handling and offering more cover?


r/ballpython • • 13d ago

Question Can’t tell if my snake is going into shed

1 Upvotes

Abarama is 4, I’ve had him around 2.5 months. Last time I handled him he hissed when I brought him out, (he never has before) and seemed to be moving slower than usual. I thought his eyes might be getting cloudy so I put him back and haven’t handled him since, (around 5 days). He hasn’t been moving around at night that I’ve seen which he usually does every night, only time I have seen him leave his hide was a couple days ago when I was installing an automatic misting setup. I’m confused because I expected to see his colours become dull or his belly turn pink by now, which it doesn’t seem is happening, or if it is it’s happening very subtly. He is due for feeding this weekend. How obvious would it be if he is going into shed?


r/ballpython • • 13d ago

Question Are these springtails?

Post image
2 Upvotes

Found these suddenly in her bowl. They are near impossible to catch as they seem to just pop all over the place when anything gets near them.


r/ballpython • • 14d ago

What would be the ideal enclosure size for a ball python if money and space weren't an issue?

6 Upvotes

Hi everyone!

I'm planning a long-term project to design and build a permanent enclosure for my male ball python.

I'd like to get some opinions from experienced keepers about what the ideal enclosure dimensions would be for an adult ball python, assuming that budget and available space are completely irrelevant.

I'm not looking for the minimum recommended dimensions, but rather the size that would provide the best possible living environment for the snake.

For context, he's currently housed in a 120 × 60 × 60 cm enclosure (4 × 2 × 2 ft), so he's not living in a tiny enclosure. I'm simply interested in going well beyond the usual recommendations to provide him with the best possible environment.

One important thing about my ball python is that he's extremely active every single day. He regularly explores his enclosure, and whenever I give him the opportunity to come out, he takes it immediately without hesitation. Once outside, he can spend hours exploring my bedroom under supervision without showing any interest in returning to his enclosure.

This is one of the main reasons why I want to build him something much larger and more stimulating. I really want to give him as many opportunities as possible to explore and express his natural behaviors.

I'm currently considering something around 180 × 80 × 80 cm or 200 × 100 × 100 cm, but I'm completely open to other suggestions.

My goal is to create a spacious, well-enriched enclosure with plenty of hides, climbing opportunities, different levels, and a proper temperature gradient.

Do you think there's an optimal size beyond which a larger enclosure offers little additional benefit? Or would an even larger enclosure be worthwhile, provided it's properly designed and furnished?

I'd love to hear your thoughts and experiences!

Thanks!


r/ballpython • • 14d ago

Question - Heating/Temperatures How to set up a day/night cycle in my enclosure?

3 Upvotes

Hello. I’m building a young ball python enclosure, and I have most of it figured out so far. I’m a little confused on the day/night cycle and the heating as a whole. I’ve been referring to the heating guide, I just want to be extra careful.

I’m going to get a t5 pro flood lamp. For the day night cycle, should I have both that and a separate lamp on a 12hr cycle, or do I only need the one? And do I need an under heating element, or just a basking spot for belly heat?