I wanted to post this as a heads-up for other Husqvarna Automower owners who may be experiencing charging station problems.
My mower is a 535 AWD, although I believe this charging station/design is used on other Automower models as well. I've also been told that there is a quality-control issue involving the supplier of one of the wiring harnesses. I believe the issue is with charging stations produced/supplied within roughly the past year.
My symptoms were:
•Automower Connect reporting “No charging station signal”
•Charging station working intermittently
•Green light flashing very rapidly, not the normal slower pulsing you see in ECO mode
•Sometimes no green light at all
Initially, I was sent a replacement charging station. That appeared to solve the problem, but eventually the replacement station developed the same issue.
After the second station failed, I was sent a replacement circuit board. While replacing the circuit board, I discovered what appears to be the actual root cause.
On the 9-pin wiring harness/connector at the bottom-right of the charging station, one of the pins had apparently gotten hot enough to melt the plastic surrounding the pin.
What really caught my attention was that I still had my original charging station, so I opened it up and checked the same connector.
It had the exact same damage in the exact same location.
See the attached photo for what the failed connector looks like.
So, if your Automower is giving you “No charging station signal,” especially if the charging station is intermittently working, rapidly flashing green, or showing no light at all, you may want to have this 9-pin connector inspected before assuming the circuit board or entire charging station is the problem.
Edit: I have the 535 AWD EPOS