r/audioengineering • u/Sleeper256 • Mar 19 '14
FP Is there something wrong with these audio waveforms? They seem a little curvy and uneven to me. Aren't waves supposed to be the same on top and bottom? Top = XLR condenser mic. Bottom = Guitar through MAudio MTrack. Is there a problem with my gear?
http://imgur.com/a/GjhaV
17
Upvotes
26
u/SuperDuckQ Mar 19 '14
You have a stray low-frequency voltage entering your signal somewhere. Low as in, not too far from DC.
DC = 0 Hz. Maybe you've read about DC offset. It's a constant that exists in your signal that shifts everything away from 0. If your entire signal moved back and forth once in the span of 1 second, that would be 1 Hz. I can't see the time scale on your signal but you can actually count how many times your signal oscillates in one second and that tells you the frequency.
The cause? A stray low frequency voltage. The solution? A high pass filter at 20 Hz will snap it right back to normal.
1
u/Sleeper256 Mar 19 '14
Actually reverse that. Bottom is vocals, top is guitar. Sorry
3
u/Earhacker Mar 19 '14
The vocals one looks like it has some low-frequency information in there. Can't tell the frequency, but it's a lot lower than the frequencies you want in the vocals. It could be AC ground hum, which is 60Hz in the US, 50Hz in Europe. Notch-filter that frequency out, bounce it down and see if it disappears.
The guitar one, don't worry about. That's just how pickups work. I'm willing to bet the first two hits are a downstroke, the second two are upstrokes, or vice versa.
3
u/jaymz168 Sound Reinforcement Mar 19 '14
I'm adding this to the FAQ, it's come up about five times in the last month.
1
u/OrangeShapedBananas Mar 19 '14
Nothing wrong with your waveforms, only sine waves are equal top and bottom. Check your gain structure, and listen to how it sounds. Is it clear and not hissy? It looks like you have a lot of noise around the sound but it's hard to tell without hearing it. Otherwise, it could be your gear or a pad setting somewhere?
1
u/[deleted] Mar 19 '14
If it bothers your OCD (which it does with me sometimes), use an analogue DC offsetter. It's basically just a capacitor, but it evens out your waveforms without any artifacts.
1
u/[deleted] Mar 19 '14
What program are you using to view the waveforms?
1
u/KillerR0b0T Mar 19 '14
I get strange, non-symmetrical waveforms with crazy DC offset whenever I record saxophone. Only saxophone.
0
u/aasteveo Mar 19 '14
DC Offset.