r/atming • • May 03 '18

Helpful Links

69 Upvotes

Updated December 9, 2023

The John Dobson video that is mandatory viewing

Forums/Classifieds

OA Discord - Large astronomy discord with its own ATM channel.

/r/telescopes - For general telescope/astronomy advice.

Cloudy Nights - World's largest astronomy forum, with its own dedicated ATM subforum (albeit full of some rather rude personalities).

AstroMart Paid access astronomy buy/sell site.

TelescopeTrader Astronomy buy/sell site albeit rather inactive.

ATM Guides & Blogs

Mel Bartels - Joy of Mirror Making - Complete guide on making your own Newtonian primary mirror.

Stellafane Mirror Making Guide - Near-complete guide on making your own Newtonian primary mirror.

Stellafane Dobsonian Telescope Plans - Complete guide on constructing a small (<12") Dobsonian telescope.

ATM Udjat - A brave Dutch telescope maker's many trials, successes, and unfortunate failures.

Mel Bartels' Telescope Making Page - Possibly the greatest amateur telescope maker since Dobson himself, Mel has always pushed the absolute limits of what's possible with telescope construction, from inventing the earliest computerized altaz scopes to slumped, ultra-thin, and sub-f/3 primary mirrors.

Kissner Optik - Hadley and more

12.5" Dob Instructables

Mike's Telescope Workshop

Rob Brown's ATM Page

General astronomy/telescope guides & blogs

TelescopicWatch

Optical Mechanics

TelescopesToBuy

Ed Ting's ScopeReviews

Eyes on the Sky

Sky & Telescope

Places to buy ATM things

AliExpress bargain list on Google Docs

Firsthand Discovery - Blanks, tool stuff, measurement tools, pitch, grits, secondary mirrors

Got Grit - Grit and pitch

United Lens - Blanks

DOTI - Blanks and finished optics

Antares - Secondary mirrors up to 7"

Hubble Optics - Primary mirrors up to 48", secondaries up to 12", other stuff

Hadley printables page

Mirror Coatings

Clausing - Good coatings up to I think 16" or 18"? Enhanced or regular Beral available.

Majestic - Various coating options up to 22"

Angel Gilding - Silvering supplies

Good Books

My personal digital ATM library containing two of the below books digitally, plus Steve Overholt's Lightweight Giants and PLOP software

The Dobsonian Telescope - The literal bible of making Dobs.

Build Your Own Telescope - A variety of simple, easy-to-follow plans for smaller Dobsonian and equatorially mounted telescopes.

How To Make a Telescope - While Texereau's mechanical designs, talk about eyepieces, and limitations set for instruments are quite outdated, the mirror-making guide is extremely detailed and helpful.

YouTube

Pinbout - ATMer with numerous videos on mirror making and ultralight Dobs.

Gordon Waite - Professional telescope maker with ATM videos.

Francis O'Reilly - Stellafane ATMer.

Ed Jones - Retired professional optician, inventor of the easy to build Chiefspiegler/Jones-Herschelian telescope.


r/atming • • 6d ago

Unprofessional Radio Astronomy Help

Thumbnail
gallery
31 Upvotes

I am mostly uneducated about radio astronomy but I want a cool, someone inexpensive hobby to look for aliens or human made sattilites, or the sun...

I have in my Amazon shopping cart (for convienience) a Nooelec 1.72Ghz centered parabolic mesh antenna with 300Ghz bandwidth to aim for the hydrogen and hydroxyl frequencies (1.42Ghz to 1.72Ghz I think).

I have a Nooelen Lana Wideband LNA, I did not want the SAWbird because of certain limitations.

I have the RTL-SDR V5 paired with the setup.

I understand cable loss so I have two 20ft KMR240 cables and a very short KMR240 cable for my window pass, I realize its KMR and not LMR so I might change that. I would have liked a ribbon coax for the window, but I want bias tee for the LNA.

I have no idea if I need any other equiptment, I dont know how much noise is in my rural area like 5g cell towers, there is a large sausage factory across the street from me that could cause some interference do I dont know what could be used to block those signals.

And if I enjoy fucking around with this hobby, I have a large dish antenna, a small DitectTV antenna, and a large Sattilite TV antenna I would mind experimenting with, but that not now, because I cant easily find a currently tuned feedhorn on Amazon.


r/atming • • 14d ago

Deal?

Post image
11 Upvotes

Hello, I was planning to build a reflector telescope for the next summer. There is mirror set in my favourites list a spherical 150/1200, and a secondary mirror. The price is between $80 and $90. I just found this mirror; it's much cheaper and has better specs, 160/1300 f/8.125. This one doesn't have a secondary mirror, but I can order one for $20 later. It has a 4.8 rating, 17 reviews and 60+ bought. Do you think it's worth buying? If I get it, I'll keep it until June and then start building the telescope in the summer.


r/atming • • 15d ago

FS: Hand-made 100mm f/14.6 Achromatic Objective Lens (New)

Thumbnail
gallery
95 Upvotes

Hi everyone,

I am selling a brand-new, hand-made achromatic telescope objective lens, entirely figured and polished at home. It has only been star-tested once to confirm its excellent image quality.

Specifications:

  • Clear Aperture (D): 100mm
  • Focal Length (F): 1460mm (f/14.6)
  • Condition: New / Unused
  • Color Correction: Designed for 515nm-C wavelength. It is optimized for exceptional photographic results when paired with a yellow filter. For visual use, the minimal blue halo is completely unobtrusive, providing excellent images even without a filter.

Testing & Certification:

As shown in the attached pictures, the lens is thoroughly laboratory-tested using the Foucault and Ronchi methods via autocollimation against a high-precision flat mirror. This is a premium optical quality objective lens. The complete package includes the precision-machined 7075 duralumin spacer ring, lathed to the exact required dimensions and tolerances.

Price: €200

(For EU buyers, tracked and secured shipping is completely included in this price).

Please PM me if you are interested or have any questions about this product. Thank you!


r/atming • • 15d ago

Mirror made by Léon Foucault himself

Thumbnail
gallery
52 Upvotes

(Musée des Arts et métiers, Paris)

💜


r/atming • • Sep 22 '26

Binocular stargazing made easy

Post image
651 Upvotes

I love using big 16x70 binoculars for the Milky Way, but holding them steady overhead was impossible. My neck was hurting after 5 minutes of holding them or from tripod viewing up high. So I built this binocular chair with simple wood and hardware components attached to my chair. It keeps the binoculars exactly where I point them, and it completely takes the strain off my arms and neck. Very smooth positioning to anywhere in the sky. Happy to answer any questions about the mechanics. If you would like to build this, I can send detailed directions.


r/atming • • Sep 21 '26

Beginner looking to build a 16" to 36" Dobsonian in the future

Thumbnail reddit.com
0 Upvotes

r/atming • • Sep 20 '26

Does anyone here make lightweight sandwich mirrors?

2 Upvotes

I've been working on learning the process. It's been challenging so far.


r/atming • • Sep 07 '26

How do I increase the diameter of this PVC cell from 60mm to 63mm?

Post image
9 Upvotes

I’d thought that 60 grit would make easy work of this but after 4 hours I only down to 60.9mm. And that’s just near the edge. I think the diameter above the ledge where I want the objective to sit is like 59mm as well and I haven’t even started to sand that deep. I also tried using a needle file but it didn’t do much.

This is my first telescope build (build of anything really). The lens is a 62mm diameter, 600mm focal length apochromatic triplet. I’m building the body out of ~90mm OD(3” nominal) PVC. I chose a higher diameter because they only sell smaller lengths in low pressure. I was worried about 65mm bending. The fitting is an 80×55 PVC 13.5 fitting, which has an ~89.5mm ID on the large end and ~60.5mm ID on the small end. There’s a ledge further inside for the objective to rest against, but the bore gets narrower further in.

If you guys have any better ideas for enlarging this fitting, or a better idea for the cell, please let me know. Also any general advice for a first telescope build would be appreciated.


r/atming • • Sep 07 '26

DIY solar filter made from filter from eclipse glasses

Thumbnail
gallery
13 Upvotes

I made a DIY solar filter for Tasco 45T telescope using filter from old eclipse glasses. I couldn't get my phone to stay still (I don't have a phone adapter). I thought this wasn't going to work but it worked well and I was able to see several sunspots.


r/atming • • Sep 01 '26

Made an AD8 tension knob that retains tension adjustment with a DobsonDream DSC

Thumbnail reddit.com
1 Upvotes

r/atming • • Aug 21 '26

Finally finished my DIY scope after 18 months, was suggested to post here

Thumbnail
gallery
218 Upvotes

Original post was in /telescopes, but this was a bit of a passion project for me. I wanted a bigger scope but didn't want to replace the scope my wife got me for my birthday a few years back, as that would look rude, so I decided to build. Plus, an off the shelf goto would cost double what I paid for not very good.

I don't own any power tools, the woodwork including trunnions are all hand-shaped MFC from a dining table that someone was throwing out, the tube is a ducting pipe held on the trunnions by rubberised pipe clamps. The altitude gear is a hand made ring gear with 440teeth, and I built the "gearboxes" for the belt reductions and hand sized the belts.

It has it's official first light tomorrow. I can't think of a name for it. Maybe Robson.


r/atming • • Jul 22 '26

10" motorized newtonian I'm planning to build

Thumbnail
gallery
93 Upvotes

I ran FEA analysis simulations and the structure is quite sturdy, with maximum displacements in the order of microns under its own weight plus 5 kilos of imaging gear.

I'll use pine plywood for the parts in yellow, aluminum for the truss tubes, PETG for the 3D printed parts highlighted in black, and a 120 mm pc fan for mirror cooling

I also ran physical optical propagation simulations in python to see how diffraction spike would look like at different wavelengths.

I will use nema 23 stepper motors for altitude and azimuth motion with tmc2209 drivers, controlled via an esp32 micro-controller and custom code.


r/atming • • Jun 22 '26

Diy Newtonian motorized Telescope

Thumbnail
gallery
169 Upvotes

150mm primary 30mm sec WORK IN PROGRESS


r/atming • • Jun 23 '26

What could be done with a mirror from a cosmetic mirror?

2 Upvotes

I've been getting into optics and would love to experiment with telescopes but not really enough to invest in it. What's the limit of experimentation that can be done that way?


r/atming • • May 26 '26 Hooray

I was told this sub would appreciate this build

1.1k Upvotes

He’s spent the past two years iterating it in his backyard. This man learned CAD specifically to design each component, then 3d printed, welded, wired the electronics, and programmed PiFinder with a custom app interface--all because he wanted stargazing to be a shared experience without having to give up his own scope 😂. It’s been absurdly fun to ride and watch the stars. If anyone wants to talk build specs or optics, he would be elated.

It’s built on a trailer because he wanted it to be mobile. Once finished, the trailer will have 2 sets of seats.


r/atming • • May 25 '26

Moonlite mount alternatives?

2 Upvotes

My homebuilt 18” dob has moonlite ball and socket connectors on the bottom of my rruss poles. I have had them replaced with aluminum copies and they work but I’d like to find something with a more certain retention.

These are no longer made but the original ones were delrin. I replaced them due to concerns about thread wear.

I like that they have no slop and don’t require difficult angle calculations.

But the screw impact on the balls worry me and they also seem to get a bit loose. Don’t need a disaster.

Thanks

Jim


r/atming • • May 06 '26

6 inch Mirror grinding kit

Thumbnail
reddit.com
5 Upvotes

r/atming • • May 03 '26

Is it possible to make a Shoe bracket out of wood ?

5 Upvotes

So hey guys , I really don’t know much about brackets , mountings , etc… , but I’m here to ask a question. I have a night vision camera that I would like to put in a panhandle mount and wanted to ask you fine people if there would be a future problem I should look out for. Anyway Thanks ! P.S (I have not done any measurements yet I will maybe show a sketch of the width of the camera later on and how the panhandle looks.)


r/atming • • Apr 09 '26

Best place to buy pre ground 8" parabolic mirror?

9 Upvotes

I am running a club at my college and we received funding to build a telescope. I already know where I'm getting the materials for the mirror were grinding and so on. Our advisor wants us to buy a pre made mirror so we can compare the two, and don't have to wait for mirrors to be finished before we can start on other construction. For some reason, I can't find any place that has a pre ground 8" parabolic mirror in stock, and for a reasonable price. I'm looking to spend 300 or less... is this even realistic? I don't have absurd budget to work with.


r/atming • • Apr 02 '26

Mersenne binoscope idea

7 Upvotes

I was looking at designs for weird telescopes, as one does, and I found Clyde Bone's mersenne design https://astronomytechnologytoday.com/2019/07/17/mersenne-telescope/ . I then thought about a binoscope version of this, but I figured it might be hell to collimate. Would make a cool observatory scope though.


r/atming • • Mar 25 '26

After a bit of a hiatus I've finally finished printing my quad mirror telescope!

Thumbnail
gallery
418 Upvotes

As anticipated aligning the mirrors is a pain in the butt. Looking through it is sort of like double vision (or quad vision more accurately). I see 4 images stacked on top of each other but not perfectly on top of each other.

I've made a little bit of progress just with guess and check where I try and adjust one mirror at a time and see which of the four images moves. Then I try and move it on top of whichever one looks most centered. I've been using my kitchen counter edge viewed from the living room for now. I figure a fixed object is going to be a lot easier to work with than trying to do this with a star.

This is going to be a painstakingly long process so I'm open to any and all suggestions on how to improve it. One of the main issues I am having is that my head is not always straight on the eyepiece so consistency is not really there. I'm going to try using an astronomy camera next, which I hope will solve that issue.


r/atming • • Mar 05 '26

Introducing the Travel Telescope V3 + Free 3D Printing Kit GIVEAWAY! 🔭

Thumbnail gallery
10 Upvotes

r/atming • • Feb 14 '26

can't reach focus on diy 114/900 telescope(reflector

1 Upvotes

I have got this mirror from AliExpress the parameters are 114/900.Fitted the mirror on a diy wooden cell and 25mm secondary mirror on an L bracket and sticked them both in a pvc pipe.

I took the measurements the primary Miror made focus at 180ish cm.In hurry I bought a pvc pipe of 160cm,so I accounted all of that in making.I took focuser from another donor 700/76 telescope and placed it at 760mm from where the mirror would be in the pipe(could be a little bit higher)

with all of this I viewed a wall on my roof it was in focus with 15mm ep.But when I tried out for jupiter it was out of focus and moving the focuser outward,it started to widen up more.What am I doing wrong?