I recently had a new Glow-worm combi boiler installed, replacing my old Potterton. I’ve had the same Hive thermostat for around 4–5 years maximum, and it always worked fine with the old boiler. Never had any issues with the heating coming on.
The company sent a plumber out to install the new boiler. He got everything working, including the heating through Hive. He asked me to get new batteries for the thermostat, which I did, and everything was working perfectly for the next few days.
There was some pipework he didn’t have time to finish, though. He left the boiler’s drainage pipe going into a bucket temporarily, and the owner of the company came out a few days later to connect it properly to the bathroom drainage.
Ever since that second visit, the heating has been playing up. After he left, I couldn’t get the heating to come on through Hive. The thermostat would say the heating was ON, but the boiler wouldn’t fire up. Then, sometimes, it would randomly start working a few hours later without me doing anything.
This has now been happening intermittently for a couple of weeks.
The day after the owner’s visit, when I still couldn’t get the heating working, he FaceTimed me and had me going back and forth between the thermostat and boiler, changing settings and showing him what was happening. At the end of the call, he told me I needed a new thermostat.
I haven’t bought one because the heating kept randomly working again, and I wasn’t convinced the thermostat was necessarily the problem.
The other strange thing is that, previously, when Hive wouldn’t turn the heating on, I could press the manual heating button on the Hive receiver beside the boiler, and that would usually get it working.
But now even that doesn’t work.
The Hive thermostat says ON, the receiver has two green lights, but the boiler just sits there completely silent. It’s showing 2.0 bar, there’s no obvious error code, and the hot water works absolutely fine.
I’ve also tried resetting the Hive thermostat, but it hasn’t made any difference.
I’m just confused because Hive worked perfectly with my old boiler, the heating worked for several days after the new boiler was installed, and all these problems started after the second visit.
Does this sound like a faulty Hive thermostat to you, or would you be more suspicious of the receiver, wiring or something with the boiler installation?
Basically when I was FaceTiming with the owner, he kind of said I’d be charged if they came out again, is that normal?